Kdd024rvx00 Parts

• Won't start

Sealed burner gas cooktop has to be removed from the counter top in order to disassemble. This means disconnecting the gas line. To disassemble the unit you will have to remove the gas line regulator. Once the unit is separated you will see the spark module. I replaced the module. Note: Because the new module has been updated from the original it does look different. I suggest you put the new module along side the old taking one wire at a time from the old to the new. If your unit is as old as... Read more

I tested the temperature sensor with my multimeter and found it reading 2000 ohms instead of 1000. I ordered the part, installed it and saved lots of money. I was considering buying a new oven but thought I would give it a shot and with all the information available it was easy. Read more

I was told the two most common part failures were the start relay and the thermostat. Ordered them both plus a new start capacitor. Relay/Capacitor was an easy 5-minute fix! Unfortunately, that alone did not fix my problem...The thermostat replacement was more involved. Once the back was removed, I had to chisel away the foam insulation the reveal the tube that the thermostat wire ran through. I used some heavy scissors to make a slit in the tube and followed the thermostat wire as far as... Read more

Shut off the gas and electric. Then removed the screws from the bottom the cover easily fell off. Gently pulled the wire and the clamp off the igniter, replaced the old igniter with the new, put the wire and clamp back. Plugged the cook-top and switched the gas on. And wallah it worked! For us it was a two man job because of the weight of the wooden shelf underneath our cook-top set up, But if your set up underneath is clear it is a one person job, but much easier to have someone there to help... Read more

• Oven is too hot
• Won't start
• Oven not heating evenly
• Little to no heat when baking

The first thing I did was call appliance pros. The tec told me it was a good chance it was the thermostat. He told how to test it with my ohm meter and what range it should be in. I pulled it out and tested it, which was out of the limits he told me it should be in. So I ordered the part. When it arrived in two days, I installed it. The oven now works perfect. Thank you so much. I was just about to go spend $800 on a new oven, and instead fixed it for $75. Awesome website. It was... Read more