Kdfe1044dss Parts

Color: Black

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This Is A Trim Kit For Custom Wood Door Panel Only

This spacer fits between tank components to maintain proper spacing and alignment, helping reduce vibration and wear. Use this genuine replacement to restore correct clearances and improve stability in the appliance's tank assembly. What it does:

• Positions and separates tank parts to maintain correct alignment during operation
• Helps reduce noise and vibration caused by misaligned components
• Prevents metal-to-metal contact that can cause premature wear or damage
• Restores factory clearances after service or replacement of tank parts

• One spacer

• Designed for direct replacement; use the OEM mounting location and orientation
• Disconnect power and water (if applicable) before beginning repair
• If fasteners or surrounding components are worn or damaged, replace them to ensure a secure fit

Color: White

A replacement control bracket that secures the console/control assembly to the appliance frame so buttons, knobs and the control board stay properly aligned. Restores stable mounting and reduces rattling or misalignment. What it does:

• Holds the control panel/console in the correct position on the appliance frame
• Keeps the control board and user interface securely mounted to prevent movement
• Helps eliminate rattling, vibration noise or intermittent contact caused by loose mounting
• Provides the proper mounting points for screws and other fasteners

• One control bracket

• Disconnect power to the appliance before beginning any repair
• Remove the console or trim as needed to access the bracket; keep all screws and fasteners
• Secure with the original fasteners; do not overtighten
• If the control board or wiring is exposed, handle electronics carefully and avoid contact with conductive tools

This control panel is the exterior front panel that holds the controls and display, restoring the appliance's user interface and appearance. It replaces a cracked, damaged, or non-responsive console surface. What it does:

• Provides the visible housing for buttons, knobs, and the display so you can operate the appliance
• Restores a secure mounting surface for control components and wiring
• Helps fix symptoms like cracked or broken front panel, loose or misaligned controls, or visible cosmetic damage
• Improves usability when the original console surface prevents normal button use or obscures the display

• Disconnect power to the appliance before beginning any repair to avoid shock
• Handle panel edges carefully to avoid cuts or damaging clips and trim
• Basic hand tools are typically required; remove trim and fasteners in reverse order of disassembly
• If the control assembly or electronic components are attached to the old panel, transfer those parts exactly as removed

This replacement lower dishrack restores the main loading surface in your dishwasher so dishes sit securely and spray reaches them for better cleaning. It replaces a cracked, rusted, or misshapen rack to help protect dishes and keep loading organized. What it does

• Provides a stable platform to hold plates, bowls and cookware during wash cycles
• Maintains correct spacing so spray arms can reach all items for effective cleaning
• Replaces bent or rusted rack wires that can snag or chip dishes
• Helps keep utensil baskets and rollers aligned for smooth rack movement

• One lower dishrack

• Remove dishwasher racks and disconnect water/electric only if required by your model; most rack swaps are simple hand installs
• Inspect and transfer any rollers, clips, or utensil baskets from the old rack to the new one if needed
• Handle carefully to avoid wire ends that may be sharp; wear gloves if helpful
• If rails or rollers are damaged, replace those parts as well for proper rack operation

The Cntrl-Elec is an OEM part for Whirlpool dishwashers. As the control and electronic component, it governs all of the major functions and operations of the dishwasher. The control board contains integrated circuits, microprocessors, and electronic components that facilitate cycles, temperature regulation, safety features, and user input.

Over time, the electronic components inside the controller can degrade or become damaged. Environmental factors like surges, fluctuations in power, and other electrical issues may also potentially cause failure. 

Symptoms of a bad controller can include:

• Not operating or cycling at all
• Inability to start or stop cycles
• Fault codes displayed
• Issues with heating or drying
• Buttons or control panel not responding

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement top lid restores the washer's top cover to protect internal components and provide a finished appearance. It's a direct-fit exterior lid used when the original lid is cracked, dented, or missing. What it does:

• Covers and protects the washer's inner tub and controls from debris and moisture.
• Restores the cabinet's appearance and helps maintain proper alignment of the top assembly.
• Commonly replaced when the lid is cracked, warped, dented, or won't latch securely.
• Helps prevent small objects from entering the washer during use.

• One replacement lid (top panel) as shown.

• High-level replacement: remove screws/fasteners securing the old lid and install the new lid in reverse order.
• Power and water must be disconnected before beginning any repair.
• Handle carefully to avoid scratching the finish; consider a second person for alignment on some models.

A replacement white plastic toe panel that restores the lower-front finish and protects the appliance base. Keeps the area under the appliance looking clean while covering vents and lower components for a finished appearance. What it does:

• Replaces a cracked, broken, chipped or missing toe panel to restore appearance
• Covers and protects lower-front components from dust, debris and accidental contact
• Helps close gaps at the appliance base that can collect dirt or allow drafts
• Provides the correct cosmetic finish for the appliance's lower front

• Disconnect power to the appliance before starting any work
• Typically installs by aligning tabs/clips and snapping or fastening into place; retain any original screws or clips
• Do not force the panel; if it resists, verify alignment to avoid breaking tabs

This replacement control panel restores the oven's front console so you can operate settings and view the display. It provides the user-interface surface and protective cover for the range's electronic controls. What it does:

• Houses the touch pads/buttons and display area so you can select bake, broil, timers, and settings
• Protects underlying electronic components from spills, grease, and everyday wear
• Replaces damaged, cracked, or cosmetic panels that interfere with button use or readability
• Can resolve issues where buttons stick, feel loose, or the faceplate is visibly broken

• One control panel (console) as shown

• Always disconnect power at the breaker before starting any service
• Handle glass or painted surfaces carefully to avoid scratches; wear gloves if needed
• Installation typically requires removing the oven door or inner trim and unfastening mounting screws—refer to the service manual

This positioner is a small mounting bracket that secures and aligns a moving or fitted component inside the appliance, helping restore correct positioning and reduce vibration or misalignment issues for reliable operation. What it does:

• Secures and aligns internal parts so they sit correctly in the cabinet or assembly
• Keeps panels, assemblies or mechanisms from shifting during use
• Reduces rattles, misalignment and friction-related wear on adjoining parts
• Helps restore proper fit and consistent operation when the original positioner is broken or worn

• One positioner

• Disconnect power (and water for applicable appliances) before beginning any service
• Follow the appliance's service manual for exact removal and installation steps
• Basic hand tools typically required; keep track of fasteners and orientation