Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a mixer that won't run, runs slowly, or smells burnt. This motor armature transfers power to attachments. Moderate DIY repair, about 1 hour.
God Bless Youtube! Searched "replace motor in Kitchen Aide mixer" and found an excellent tutorial on the subject made by AppliancePartsPros.com. Followed the instructions with my smart phone and purchased a new motor and brushes. Fixed the $500 mixer for $50.. Runs like new but now have to change the color per her request. Excellent company to deal . Read more
Fix oil or grease leaking into your mixing bowl with this center shaft kit. Includes shaft, seal, and gasket. Moderate DIY repair for experienced users.
Checked out You tube video. Easy tune up. One gasket was damaged and I did not notice that the brush holders has no brushes. I believe a quick call to Appliance parts pros will fix this, besides I need a few more parts. I expect to get another 20+ years from this KitchenAide mixer, once repairs are competed. Watch out for the single lock washer located on the rear upper housing screw, you don't want to lose this! Read more
Mixer won't start or stopped working suddenly? A failed field assembly disrupts the motor's electromagnetic field. Moderate DIY repair restores power.
Secures the worm gear and drive shaft in your stand mixer. Replace if the pin is missing, bent, or has fallen out, preventing proper rotation.
Originally I thought the worm gear had gone bad - the most common problem when the mixer head won't turn. Got a new worm gear and took extraapart the mixer (followed the instructions in an online video tutorial). The worm gear was fine! The problem turned out to be that the small metal pin that secures the worm gear and drive shaft together was missing (?). Don't know where it went or if it was ever there in the first place, but without it the drive shaft and worm gear do not work together... Read more
Wire whip attachment for stand mixers incorporates air into ingredients for whipping cream, egg whites, and fluffy mixtures. Replace if bent or corroded.
Called and gave the model number. You had it in stock. Work perfectly. Talked to two different women on two days. No pressure, so very nice and pleasant. I am keeping your name and number. Thank you for a very pleasant experience. John Thomas Read more
Speed control lever cracked or broken? This mixer speed control lever restores speed adjustment. Simple 15-minute repair with basic tools.
After ordering the speed lever, I watched one of the videos about disassembling the mixer. I followed the instructions pretty much to the letter except I found I spent more time cleaning and air dusting around the motor to get the accumulated flour dust out. The insides of the mixer haven't been touched in 30 years. About the most difficult part of disassembly was the 4 screws holding the mixer head to the stationary base. these screws have beveled cuts designed to lock the screws in place, I... Read more
Wire whip attachment for 5-quart stand mixers. Beats egg whites, whips cream, and aerates light batters. Replace if bent, rusted, or worn. Confirm fit.
Replaced old parts added new ones. So excited. My 26 year old kitchen aid is functional and amazing. Read more
Replacement thumb screw for stand mixer power hub. Secures beater, whisk, and dough hook attachments. Replace if cracked, broken, or missing.
Fix mixer stuck at one speed or won't turn off. This speed link connects to the speed control mechanism. Common DIY repair, takes 30-45 minutes.
Found the broken parts upon disassembly. Ordered new parts. Parts were shipped very quickly. Read more
The Cap-Screw is an OEM component specifically designed for Whirlpool mixers. It contains precision mixing mechanisms that allow users to easily and effectively blend, whip, or beat ingredients. Symptoms of a bad Cap-Screw include:
Causes of failure can be faulty power switches, worn gears, damaged housing or bowls, or deterioration of internal wiring over time. This Cap-Screw is also compatible for use with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and select Kenmore.
Found the part on your website, switched out the plates, and now it works beautifully. Thank you! Read more
Rubber foot for stand mixers. Installs at the base to provide stability. Replace if worn, cracked, missing, or damaged to prevent mixer movement.
Replacement lift arm for stand mixers. Supports and raises/lowers the mixing bowl. Replace if cracked, broken, or won't stay in raised position.
I followed the online tutorials, there are many....replaced the PLASTIC part that had worn out Part #: AP4325266 (241764), and also the roll pin, Part #: AP3038054 (9703442) that held it in place with the handle. THIS IS THE HARDEST part of the entire repair, pounding out the roll pin and pounding it back in. A special tool should probably be used for this. I had a small specialized driver bit that "fit" for the job, so I abused it. Probably didn't need to BUY a NEW roll pin, ( it HAS be... Read more
Dough hook attachment for KitchenAid stand mixers. Kneads bread, pizza, and roll dough. Replace if your original hook is lost, damaged, or missing.
My brother purchased an older model KitchenAid mixer. It works great. I ordered the Dough hook and the flat beater on Ebay. They did not fit. They were too long. After investigating the model number, my model is about 30 years old, I called Appliance Pros and they were very helpful in finding the correct parts for me. I ordered, and they work great. Thanks for your help. Read more
Replacement rubber foot for stand mixers. Secures to the base to prevent movement and slipping during operation. Replace if cracked, worn, or missing.
My brother saw the parts on the counter when they came for dinner. Well that was it, he loves doing that kind of stuff so I said go for it. It was a Kitchen Aid professional mixer, it took him about 30 minutes to complete Works great was a lot easier then I thought it would be. Read more
Supports moving mechanisms in your stand mixer for smooth operation. Replace if you notice excessive noise, wobbling, or oil leaks. Verify fit with your model.
Replaced the armature bearing at the front of the mixer next to the gear case and replaced the gasket on the gear case. Read more
If your stand mixer bowl won't lock or stay in place during mixing, this latch spring secures the bowl properly. Easy 5-minute fix with just two screws.
Removed the two mounting screws and replaced the broken piece with the new spring. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.