Kdte204kps Parts

The Drain Hose is an OEM part for Whirlpool dishwashers. It serves as the connection that allows dirty water to exit the dishwasher tub and flow into the water drain system after each wash cycle. The hose transports wastewater from inside the dishwasher out through the standpipe.

Causes of a bad drain hose can include mineral or food debris buildup blocking water flow within the hose, cracks or breaks in the plastic material from repeated bending, or a loose or damaged hose clamp connection.

Symptoms of a drain hose failure include:

• Standing water remaining in the bottom of the tub after a cycle
• Puddles or leaks developing near or underneath the dishwasher
• Water failing to properly drain during the designated drain portion of cycles
• Kinks or sagging appearing in the hose affecting water drainage

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Fixes loose panels, rattling doors, or wobbly components caused by stripped or missing screws. Secures brackets, covers, and mounting hardware. Easy DIY.

Fix dishes not cleaning properly or spotty glassware with this dishwasher detergent and rinse aid dispenser. Restores proper soap release timing.

Secures the sliding dishwasher rack at the rear of the tub. Replace if your clip is cracked, broken, or missing to keep the rack properly positioned.

Retainer pin secures the top spray arm underneath the dishwasher's interior roof panel. Replace if cracked, broken, deformed, or missing from wear.

Fix a dishwasher door that won't stay closed during cycles with this latch strike plate. Simple slide-in installation takes minutes. Restores tight seal.

This is an internal filter assembly that sits in the bottom of the dishwasher tub to trap food particles and debris during the wash and drain cycles. It prevents food waste from recirculating onto clean dishes or clogging the drain pump. Replace this filter if dishes come out with food residue, the dishwasher has a foul odor, or water is not draining properly.

This factory fastener replaces a worn, stripped, or missing screw to securely hold appliance components in place, restoring proper fit and reducing vibration, noise, and loosening issues. It helps maintain alignment and safe operation of the affected assembly. What it does:

• Secures panels, brackets, or internal components as designed for the appliance
• Maintains assembly alignment for reliable performance
• Helps prevent rattling or vibration from loose hardware
• Replace when the original screw is missing, corroded, stripped, or damaged

• 1 screw

• Disconnect power; for gas- or water-connected appliances, shut off supply before servicing
• Match the screw to its original location and retain any spacers or clips used with the original
• Start threads by hand to avoid cross-threading; use the correct driver size
• Tighten until snug; do not overtighten to avoid stripping threads

Metal toe panel for dishwashers. Covers the bottom front edge of the unit. Replace if cracked, dented, scratched, or missing to restore appearance.

Replacement mounting screw for dishwashers and ranges. Secures panels, brackets, and internal components when original hardware is stripped, missing, or corroded.

Replacement silverware basket for dishwasher lower rack. Organizes and secures utensils during wash cycles. Needed when original is cracked or missing.

This factory screw secures components in your appliance to keep them properly mounted and stable during operation. Replacing a missing or damaged screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Fastens panels, brackets, or trim to maintain correct alignment
• Can address rattling, vibration, or loose/misaligned parts where this screw is used
• Helps prevent wear from movement caused by missing or stripped hardware

• Unplug power and shut off utilities before service
• Note original screw location and orientation; replace like-for-like
• Do not overtighten—start by hand to avoid cross-threading
• Address threads before installing the new screw

This genuine replacement door handle restores a solid, comfortable grip for opening and closing your appliance's door. Replace a cracked, loose, or missing handle to keep daily use safe and the appliance looking factory-clean. What it does:

• Provides the handhold needed to open and close the door
• Transfers pull force to the door without stressing the latch
• Helps ensure the door can be operated safely and consistently
• Common symptoms: handle cracked, broken, loose, spinning, or missing

• 1 door handle

• Disconnect power before servicing; allow hot surfaces to cool
• Protect surrounding surfaces; support the door if required by your model
• Access the mounting screws as directed by your service manual; note screw locations and any spacers
• Tighten screws evenly without overtightening; wear cut-resistant gloves

Replacement tub wheel that supports and guides the washer drum for smooth, aligned rotation. Replace worn wheels to reduce drum noise, rubbing and uneven spinning. What it does:

• Supports and guides the washer drum so it turns smoothly and stays aligned.
• Reduces friction between the drum and cabinet, helping prevent scraping or binding.
• Replace if the drum squeaks, drags, rubs, or wobbles during spin cycles.

• Disconnect power and turn off water supply before servicing the appliance.
• Access may require removing the cabinet, front or rear panel depending on model.
• Inspect adjacent shafts, bearings and mounts for wear and replace if needed.
• Reassemble and test the washer after installation to ensure proper drum movement.

Replacement dishwasher mounting screw secures panels, brackets, and internal components. Needed when original fasteners are missing, stripped, or damaged.

Drain hose that diverts wastewater from your dishwasher to the disposal or drain pipe. Replace if cracked, leaking, or disconnected from the sump assembly.