Kdtm704kps Parts

This genuine replacement door handle restores a solid, comfortable grip for opening and closing your appliance's door. Replace a cracked, loose, or missing handle to keep daily use safe and the appliance looking factory-clean. What it does:

• Provides the handhold needed to open and close the door
• Transfers pull force to the door without stressing the latch
• Helps ensure the door can be operated safely and consistently
• Common symptoms: handle cracked, broken, loose, spinning, or missing

• 1 door handle

• Disconnect power before servicing; allow hot surfaces to cool
• Protect surrounding surfaces; support the door if required by your model
• Access the mounting screws as directed by your service manual; note screw locations and any spacers
• Tighten screws evenly without overtightening; wear cut-resistant gloves

This dishwasher rack tine row replaces a damaged or missing row of tines, restoring proper spacing to hold dishes upright. It improves spray coverage, reduces item-to-item contact, and brings back the rack's original loading layout.

• Provides vertical supports to separate plates, bowls, and lids for consistent cleaning
• Replaces a bent, broken, or rusted row that allows items to tip or nest
• Helps reduce rattling and potential chipping during wash cycles
• Common symptoms: dishes falling over, poor cleaning where tines are missing, visible damage to the row

• Turn off power to the dishwasher before servicing and pull out the rack for access
• Release the old row from its retaining clips; note clip orientation
• Transfer reusable clips/hardware if needed and snap the new row in until fully seated
• Reinstall the rack and confirm the row locks in place and holds items securely

The Dishwasher Filter Screen is an OEM part for Whirlpool dishwashers. As a key filtration component, the filter screen traps food particles and debris to prevent clogs and ensure optimal water circulation during wash cycles. It is responsible for filtering out contaminants and protecting internal pump components from damage.

Symptoms of a bad filter screen include:

• Reduced or uneven water pressure during wash cycles  
• Puddles or pooled water inside the dishwasher
• Food debris caught in the pump or other areas  
• The dishwasher fails to fill or drain properly
• Unusual noises emanating from the dishwasher

Causes of a bad filter screen can include clogging over time due to accumulated food waste and mineral deposits or damage such as cracks or tears in the screen material.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.

This replacement screw secures appliance panels, brackets, and internal components. Install it when original hardware is missing, stripped, or corroded to restore a solid, factory hold and help stop vibration, rattles, and misalignment.

• Provides secure attachment for covers, brackets, and assemblies
• Replaces missing, damaged, or rusted hardware
• Helps resolve loose panels, buzzing/rattling noises, or shifting parts
• Supports proper alignment and reliable operation when tightened correctly

• Disconnect power; shut off gas/water if applicable before service
• Match thread and length to the original; replace in the same location
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• If washers, spacers, or threadlocker were present originally, transfer or replace them

The Sump is an OEM part for Whirlpool dishwashers. It houses the dishwasher's motor and pump assembly, responsible for circulating water and ensuring effective cleaning of your dishes.

A bad sump can occur due to wear and tear, clogs, or damage caused by foreign objects. If you notice issues such as water not draining properly, leaks, or unusual noises during the dishwasher cycle, it may indicate a problem with the sump.

Symptoms of a bad sump include:

• Water not draining or draining slowly from the dishwasher
• Leaks or water pooling at the bottom of the dishwasher
• Unusual noises such as grinding or rattling sounds

Replace your faulty sump with this genuine OEM part to restore your dishwasher. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Panel Toe is an OEM part compatible with GE dishwashers. It is a discreet metallic strip located along the bottom front panel of the appliance. The toe provides protection and reinforcement to this high-impact area.   

Causes of a bad panel toe include normal wear from opening and closing the dishwasher door hundreds of times each year. Misalignment from door impact can also cause premature deterioration.

Symptoms of a bad panel toe include: 

• Visible cracking, bending, or detachment of the toe strip
• Potential for other panel issues if toe integrity is compromised
• Possible denting or distortion of neighboring surfaces
• Aesthetic issues and reduced protection of front panel edges

This genuine GE replacement part restores the structure and helps prevent further damage. Compatible Dishwasher models also include some Hotpoint, Profile, and Kenmore units.
 

The Retainer is an OEM part for Whirlpool dishwashers. It securely holds the top spray arm in place underneath the dishwasher interior roof panel.

Causes of a bad retainer include cracking, breaking or deforming from repeated use and natural wear over time.

Symptoms of a bad top spray arm retainer are:

• Loosening or detachment of the upper spray arm during washing cycles
• Reduced or uneven water coverage for upper rack dishes
• Potential rattling or noise from an unsecured spray arm

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement capacitor stores and releases energy to give an AC motor the phase shift it needs to start and run smoothly. Installing a fresh capacitor can help when a motor hums, struggles to start, or cycles off. What it does

• Provides the phase shift/starting torque an AC motor needs and stabilizes operation
• Helps reduce repeated start attempts and nuisance thermal trips
• Common symptoms of a weak capacitor: motor hums, won't start, or stops shortly after starting
• Physical signs of failure can include a swollen, leaking, or cracked casing

• 1 capacitor

• Disconnect power to the appliance before servicing
• Safely discharge the capacitor with an appropriate resistor/discharge tool before handling
• Mark/photograph wire locations and transfer connections one-for-one to the new part
• Reinstall in the original bracket or mounting location; keep wiring secure and clear of moving parts

The Insulation is an OEM part for GE dishwashers. It is located inside the dishwasher tub and helps maintain optimal temperatures during the wash cycle. The insulation forms a barrier that minimizes heat transfer between the tub interior and exterior cabinet walls.  

Causes of bad insulation can include cracks or compression damage over time. Excess moisture during washing may also cause premature breakdown.

Symptoms of a bad insulation include:

• Inability to efficiently heat or maintain water temperatures  
• Extended cycle times and higher energy usage
• Temperature fluctuation issues can trigger error codes
• Condensation or moisture inside the cabinet walls

This genuine OEM GE insulation restores the tub's optimal thermal properties. It is also compatible with some Hotpoint, Profile, and select Kenmore models manufactured for Sears. Replace yours now to optimize energy efficiency and washing performance.
 

This power cord strain relief secures the cord where it passes through the appliance cabinet, protecting the jacket and preventing pull on internal connections. Replacing a cracked or missing connector restores a safe, stable cord entry. What it does:

• Secures the power cord at the cabinet entry to relieve strain on internal terminals or junction connections
• Provides a protective bushing to reduce abrasion of the cord jacket against cabinet edges
• Helps maintain proper routing and support for the incoming power cord
• Typical signs it's needed: loose or wobbly cord at entry, broken/missing connector, or visible chafing on the cord jacket

• 1 strain relief connector

• Disconnect power at the breaker or unplug the appliance before servicing
• Remove the access cover, release and remove the old strain relief, and route the cord through the new connector
• Seat the connector fully so it captures the cord's outer jacket—not the individual conductors
• After reassembly, verify the cord is secure and does not move at the entry point

This replacement screw secures appliance components, panels, and brackets. It restores a tight, reliable hold when an original fastener is missing or damaged, helping eliminate rattles, gaps, or shifting parts.

• Fastens two or more parts together inside the appliance
• Helps keep panels, brackets, or trim securely in place
• Can reduce vibration, rattling, or loose handles caused by missing/loose screws
• Replaces worn, stripped, or corroded fasteners

• Disconnect power and shut off water supply before servicing
• Match location and orientation to the original fastener
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to prevent stripping or cracking

This factory screw secures components in your appliance to keep them properly mounted and stable during operation. Replacing a missing or damaged screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Fastens panels, brackets, or trim to maintain correct alignment
• Can address rattling, vibration, or loose/misaligned parts where this screw is used
• Helps prevent wear from movement caused by missing or stripped hardware

• Unplug power and shut off utilities before service
• Note original screw location and orientation; replace like-for-like
• Do not overtighten—start by hand to avoid cross-threading
• Address threads before installing the new screw

Replacement fill hose that routes water from the household supply to the appliance's ice maker and water dispenser, restoring proper water delivery and helping prevent leaks or pooling from a damaged line. What it does

• Directs water from the inlet valve to the ice maker and dispenser for ice production and dispensing.
• Maintains steady water flow; prevents kinks and pinched lines that reduce flow.
• Replace if cracked, split, collapsed, or leaking.
• Common symptoms: reduced or no water to the dispenser or ice maker, visible leaks, or pooling under/behind the appliance.

• Turn off the water supply and disconnect power before servicing to avoid flooding and electrical hazard.
• Inspect and replace clamps or fittings as needed; ensure proper seating and a snug, leak-free connection without overtightening.
• Check for kinks in the hose and route it so it won't be pinched by the appliance or cabinetry.
• After installation, turn the water back on and test for leaks at all connections.

The Inlet Hose is an OEM part for Whirlpool built-in dishwasher models. This hose delivers fresh water from the household supply to the appliance spray arms and pumps. 

Symptoms of a faulty inlet hose include:

• Leaks or drips around hose connections  
• Kinks or cracks in the supply line tubing
• Restricted or no water flow to critical systems
• Improper water levels causing wash performance issues

Causes can be deformation from tight bends over time. Mineral buildup inside the hose is also common with extended use. Accidental damage during plumbing work presents another potential cause.

This authentic Whirlpool replacement is compatible with some Maytag, Jenn-Air and Amana dishwasher brands as well.

This is the dishwasher silverware basket that organizes and secures utensils in the lower rack for effective spray coverage. Replace a cracked, warped, or missing basket to restore proper loading, protect small items, and maintain consistent cleaning results. What it does:

• Holds and separates utensils and small items during the wash cycle
• Helps ensure thorough water spray coverage for better cleaning
• Keeps small pieces from falling through to the bottom of the tub
• Common signs you need a new basket: cracks, broken sections, warping, or utensils tipping/falling through

• 1 silverware basket

• Make sure the dishwasher is off and the cycle is complete before starting
• Remove the old basket and place the new basket in the designated area of the lower rack
• Ensure the basket sits flat and does not interfere with the spray arm before running a test cycle

This factory part is a precision ring used within the appliance assembly to position and secure mating components. Replacing a worn, cracked, or missing ring restores proper fit, reduces noise, and helps prevent premature wear or leaks. What it does:

• Provides seating/retention for the specified component in the assembly
• Maintains correct alignment and spacing between parts
• Helps prevent vibration, rubbing, or leaks caused by a loose fit
• Replace if distorted, cracked, corroded, or missing
• Typical symptoms include loose or wobbly parts, scraping/rattling noises, or components slipping out of place

• 1 ring

• Disconnect power and shut off any utilities (water/gas) as applicable before service
• Access the assembly and note the ring's orientation; take reference photos
• Use appropriate hand tools; avoid over-stretching and ensure the ring seats fully in its groove or against its shoulder
• Verify smooth operation of the mechanism before reassembly and testing