Kenmore 11027072602 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182767
Washer leaking water or not draining? This tub to drain pump hose transports water during the drain cycle. Quick 15-minute repair with video guide.
Do-It-Yourself Stories from Customers like You
Leaking water under the water pump Ed M. • Hayward , CA • January 25, 2018
APPLIANCE PARTS PROS HELPED ME AND GUIDED ME FOR THE PARTS. PROBLEM FIXED.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10363893
Carries wastewater from washer pump to household drain. Replace if cracked, leaking, clogged, or damaged to restore proper drainage and prevent puddles.
Do-It-Yourself Stories from Customers like You
Ld error code (slow water drain) during drain pump cycles of the wash cycle ld code sometimes on large loads but more consistently on smaller loads Mark H. • Wellington , OH • January 16, 2017
Replaced the drain pump and the drain hose (since I was replacing the drain pump). The new drain pump seems to pump out the water more forcefully than the one replaced.
Have not received a LD code during the wash cycle since the replacement was installed.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP89503
Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.
Do-It-Yourself Stories from Customers like You
Low water flow and fabric softener would dispense immediately when cycle started Bob G. • Sylacauga , AL • January 19, 2019
Replaced flow meter and control valve
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP693995
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
Do-It-Yourself Stories from Customers like You
There was no power cord and accessories to attach it Terry C. • Martin , TN • December 27, 2016
I put all pieces that I ordered on the dryer and plugged it in.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10109200
This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.
- Fastens panels, brackets, or internal parts to the cabinet/frame
- Helps maintain alignment to reduce vibration and rattling
- Replaces lost, stripped, or corroded screws
- Common symptoms: loose panels/trim, rattles, or a screw that won't tighten
What's included: One screw. Install notes:
- Disconnect power; shut off water or gas if applicable
- Match thread and length to the original; replace one at a time to keep alignment
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten, especially into plastic or thin sheet metal
Do-It-Yourself Stories from Customers like You
Missing baffles Anna S. • Shoreview , MN • January 31, 2016
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681414
Specs: 10-16 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Dryer drum was beginning to stall occasionally Dana J E. • San Marcos , CA • March 17, 2015
After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182769
Fix water leaking from under your washer with this tub to circulation pump hose. Connects the tub to the pump during wash cycles. DIY repair in under 1 hour.
Do-It-Yourself Stories from Customers like You
Leaking water under the water pump Ed M. • Hayward , CA • January 25, 2018
APPLIANCE PARTS PROS HELPED ME AND GUIDED ME FOR THE PARTS. PROBLEM FIXED.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 280146
Washer making loud grinding noise during spin? A damaged motor rotor with worn splines or cracked magnets causes this. Repair guide included.
Do-It-Yourself Stories from Customers like You
Rotor was scraping on stator because the stator was cracked John C. • Santa Clara , CA • October 04, 2019
Replaced rotor and stator
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10106990
Fix washer leaking or puddling on the floor with a new water nozzle assembly. Stops dripping, misdirected spray, and restores proper water flow.
Do-It-Yourself Stories from Customers like You
Water was leaking and puddling in floor after each use Jilda R. • Pell City , AL • September 23, 2016
Watched video on your website to determine how to raise lid and found the part that was leaking. I was able to order the part directly from schematic and it arrived in a couple of days. Easy to install after watching the video.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3367052
Hose clamp for securing water supply and drain hoses on the washer. Provides leak-free seal at hose connection points.
Do-It-Yourself Stories from Customers like You
Fill hose leaking at crimp fitting by faucet connector faucet adapter leaking (whirlpool portable dishwasher) Ralph P. • San Antonio , TX • August 21, 2016
Replace faucet adapter, replace fill and drain hose assembly. You must remove outer cabinet to be able to route new hoses and access hose connections under tub.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10160572
Secures the washer drain hose to the cabinet frame to prevent movement during draining. Replace if cracked, broken, or missing to reduce vibration noise.
Do-It-Yourself Stories from Customers like You
Hose connecter Arnold P. • Mulberry , FL • September 17, 2015
Replace it
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10076260
If clothes aren't getting clean or agitator wobbles, the impeller wash plate may be cracked or stripped. Restores proper wash action and cleaning.
Do-It-Yourself Stories from Customers like You
Leaking seal, loud bearings Donald P. • Collinsville , IL • September 09, 2019
Ordered the shaft, bearing, seal kit. I didn’t order the tool to press the bearings in. If you’re not experienced in changing bearings, I suggest you order it. Straight forward repair. The top of my Whirlpool Cabrio comes off differently than the video showed, everything else was spot on. The adhesive is tacky...wear surgical gloves, trust me.
One more thing, get a 1-1/4 “ short box wrench for taking off the shaft bit.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Broken handle foot pedal and missing parts Donald M. • Lake Arrowhead , CA • April 05, 2015
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10198919
Suspension rod ball and bushing kit with 4 balls and 4 bushings. Replaces worn or broken suspension components that cause washer movement and noise.
Do-It-Yourself Stories from Customers like You
Unbalanced wash. Donald W. • Brookpark , OH • December 25, 2018
After contacting and setting up a in home repair man to come assess the problem. He was late . I found the awesome appliance parts pro site, watched some videos and figured I could do this myself. So I ordered the parts using the easy to find and order the parts for your machine thru AppliancePartsPros.com. They shipped the item and I was surprised how quick it came. I was unable to get my big arms down to the bottom of the spring to remove it.. this is where a skinny woman comes in handy. My...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP16123
Rubber washer gasket for washer fill hose connections. Replace if worn or leaking at coupler adapter. Measures 1-1/16 x 5/8 inch. Verify fit with model.
Do-It-Yourself Stories from Customers like You
Water inlet valve was corroded and broken washer Sandra H. • Belton , MO • June 26, 2015
Replaced with new part ordered from store
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21097
Cushioning pad that installs between the washer lid hinge and cabinet. Replace if cracked, worn, or missing to reduce squeaks and prevent metal wear.
Do-It-Yourself Stories from Customers like You
Cracked lid on a whirlpool cabrio washer Doug P. • Kansas City , MO • September 05, 2015
Removed the screws, lifted the old lid out of the hinges. Replaced the hinges, set new lid in the hinges and replaced screws.
Read more
More