Kenmore 665 Parts

This plate-latch strike secures the appliance door by engaging the latch assembly so the door stays closed during operation. It replaces a worn or damaged strike to restore proper door closure and reliable operation. What it does:

• Provides a sturdy contact point for the door latch to engage and hold the door closed
• Helps prevent the door from popping open during use, which can cause cycle interruption
• Addresses symptoms like a door that won't stay latched, won't close fully, or causes the unit to stop mid-cycle
• Works as the mating strike for the existing latch assembly to ensure proper alignment

• One plate-latch strike

• Disconnect power to the appliance before beginning any repair
• Access the strike by opening the door; remove any trim or screws as needed to reach the strike mounting location
• Install replacement in the same orientation as the original and tighten fasteners securely without over-torquing
• After installation, verify the door latches smoothly and the appliance completes its normal cycle

This part is a replacement hex bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped or defective hex bolt in outdoor power equipment.Hex bolts are a standard piece of hardware that have many different functionalities. They are named for their hexagon shaped heads. Bolts are essential for securely holding together different equipment parts but can become corroded, stripped, or misplaced, requiring replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex bolt, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this hex bolt is suitable for use on several outdoor power equipment manufactured by MTD, Craftsman, and other brands. Please This is a genuine part made of high-quality, durable metal and is sold individually.

This part is a replacement ammeter. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective ammeter in a variety of lawn tractor models.The ammeter is important as it displays and measures the lawn tractor's current as it is generated by the engine. If this part is faulty in any way, it should be immediately replaced. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this ammeter, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this ammeter is suitable for use on several different models of lawn tractors manufactured by MTD, Craftsman, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a headlight lens. This is a genuine replacement part made by MTD. This headlight lens is commonly found in lawn mowers and is placed over the bulb in the front of the appliance, similar to how a vehicle runs. This ensures that the light is dispersed evenly and the user is able to see.A new headlight lens might be needed if the current one is missing or damaged in any way. This can include being cracked, dented, or chipped from normal wear and tear. If the lens is too dirty and cannot be cleaned, it is important to change it. This should be a simple repair and only require common household tools. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

This motor-pump assembly replaces the dishwasher's pump and motor that circulate and remove wash water so cleaning cycles run correctly. It restores proper draining and water movement for reliable performance. What it does:

• Circulates wash water through spray arms during the wash and rinse cycles
• Pumps wastewater out of the tub during drain phases
• Commonly used when the dishwasher fails to drain or leaves standing water
• Can resolve loud or grinding noises coming from the bottom of the dishwasher
• Helps prevent cycle failures caused by poor water movement

• Disconnect power to the appliance before attempting any service
• Access from the dishwasher base—support the appliance and follow OEM disassembly steps
• Keep the work area dry; expect some residual water in the tub/hose when removing the pump

A general-purpose replacement screw used to secure panels, trim or components on compatible Whirlpool appliances. This genuine-style fastener restores proper assembly and prevents loose or rattling parts for a safe, reliable fit. What it does

• Secures control panels, trim pieces, brackets or internal components to hold assemblies in place
• Restores lost or stripped fasteners that cause loose panels or vibration noise
• Helps maintain alignment of connected parts for correct operation and a finished appearance
• Compatible with applications that require the OEM W11232015 screw specification

• One replacement screw

• Use correct driver bit and gentle torque to avoid stripping the head or threads
• Replace only when the original fastener is missing or damaged; confirm length/thread before installation
• Disconnect power and follow appliance safety procedures when accessing internal components

This dual positioner assembly helps align and hold the control shaft/knob mechanism so selections register correctly and controls operate smoothly. It replaces a worn or broken positioner to restore reliable selector alignment. What it does:

• Secures and centers the control shaft/knob so detents register properly
• Prevents loose or wandering knobs and helps ensure accurate cycle selection
• Commonly replaced when knobs feel sloppy, skip positions, or controls don't stay set
• Works with the control panel mounting to stabilize selector movement

• Disconnect power to the appliance before starting any work
• Remove the control panel or console to access the positioner per your model's service instructions
• Handle plastic tabs and mounting points carefully to avoid breakage during removal/installation
• Test control function after reassembly to confirm correct alignment and operation

This inlet water bezel is the trim piece that fits around the washer's water inlet to provide a finished opening and support the inlet connection. It restores appearance and helps position the inlet area for a proper hose fit. What it does:

• Covers and finishes the water inlet opening on the cabinet for a clean appearance
• Helps hold and align the inlet connection and hose to reduce stress on the valve
• Prevents direct contact between the inlet hose/valve and the cabinet edge
• Commonly replaced when the inlet trim is cracked, broken, or worn

• Disconnect power and shut off the water supply before starting
• Remove the appropriate access panel or control console to reach the inlet area
• Handle the bezel carefully to avoid scratching painted surfaces during install
• Re-check inlet hose routing and tighten connections; test for leaks after restoring power/water

This is a genuine replacement link deck lift. This part is found on lawn mowers. It is used to raise and lower the deck that protects blades in the mower. If damaged, this part can create problems with lowering mower blades, causing the mower to be unusable. The link deck lift rarely can be damaged or worn due to regular wear and tear. It can also be bent and may need a hammer or mallet to bend back and be removed. Replacing the link deck lift is a simple fix. A wrench, socket set, and mallet may be needed to remove and replace this part. Depending on the type of mower used, remove the link deck lift from the pin. Realign the replacement link deck lift on the pin. This is a genuine MTD replacement part. The link deck lift is compatible with most lawn mowers and occasionally snow blowers. This part is sold separately.

Color: Biscuit. Screw for lower toe panel. For black screw use WP302868, for white screw use WP3400836.

This genuine MTD replacement part is a steering wheel for use with lawn tractors and riding mowers. A properly functioning steering wheel is essential for the safe and reliable use of a lawn tractor or riding mower. The steering wheel turns the vehicle and allows for safe maneuvering.The steering wheel may become worn out or damaged with extended use, necessitating replacement. Remember to check the steering wheel periodically to spot any wear or damage. This part is an identical replacement for a steering wheel that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with Craftsman, Husky, MTD, Troy-Bilt, and more lawn tractors and riding mowers. Please note: original part numbers 631-04008 and 631-04008A are now obsolete, and manufacturer has replaced the original part number with this part.

This replacement part is a front axle intended for use in lawn mowers. This is a genuine replacement part made by MTD. Front axles help control the wheel so that the user is able to ride straight on riding lawn mowers. This part ensures that the front wheels are stationed properly on the mower.A new front axle might be needed if the machine is not driving straight or the axle is not situated appropriately. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This right hand front axle assembly is a genuine MTD part, sold individually. This right hand front axle assembly can be used as a replacement part in a lawn mower. The purpose of the right hand front axle assembly in a lawn mower is to facilitate the rotation and movement of the right hand front wheels.The right hand front axle assembly might have to be replaced if it can no longer serve its typical function at some point within the standard lifespan of the lawn mower. This could occur if the right hand front axle assembly is punctured, dented, cracked, warped, eroded, or otherwise damaged to the point of reduced efficacy.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This right hand front axle assembly is compatible with the following outdoor appliance brands: MTD and Bolens.