Kenmore Elite Side Side Parts

Adjustable leveling leg assembly stabilizes your refrigerator and ensures proper door alignment. Replace worn legs to reduce vibration and noise. Confirm fit.

Supports and guides refrigerator drawers for smooth opening and closing. Replace when worn or cracked to restore proper alignment and prevent binding or tilting. Confirm fit with your model number.

This funnel frame assembly mounts inside the refrigerator door dispenser area and directs crushed or cubed ice from the dispenser mechanism into your glass. It serves as the chute through which ice travels after being released from the ice bucket. Replace this part if ice is scattering, jamming, or not dispensing cleanly through the door dispenser opening.

This fan grille assembly covers and protects the refrigerator's fan while channeling airflow through the vents. Replacing a cracked or missing grille helps restore proper air circulation and can reduce noise and temperature fluctuations.

• Shields the fan blades and prevents items from contacting the intake
• Directs airflow to support even cooling throughout the compartment
• Typical symptoms: broken louvers or tabs, rattling/vibration noises, obstructed airflow, frost or warm spots near the fan area
• Restores the original airflow path and appearance after damage

• Disconnect power and clear shelves/drawers to access the panel
• Remove the screws/clips securing the old grille and retain any reusable hardware
• Position the new grille and fasten securely; ensure the fan spins freely and vents are unobstructed
• Restore power and allow temperatures to stabilize

Fix frost buildup and poor cooling with a new defrost heater. Melts ice from evaporator coils during automatic defrost cycles to maintain stable temps.

Replace a cracked, clogged, or damaged ignitor orifice assembly under your gas range cooktop. Routes gas to surface burner and houses spark electrode.

This replacement fan blade mounts on the fan motor to move air for proper cooling. A cracked, loose, or damaged blade can cause noise and weak airflow—replacing it restores smooth, reliable air circulation. What it does:

• Drives airflow to help maintain stable temperatures throughout the appliance
• Supports efficient cooling by circulating air across key areas
• Common symptoms include rattling or scraping near the fan, vibration, or wobbling
• Replacement is recommended if the motor runs but the blade slips, doesn't spin, or is visibly damaged

• 1 fan blade

• Disconnect power before servicing
• Access the fan area by removing covers/shelves as needed
• Note blade orientation; pull the old blade straight off the shaft and press the new blade on until fully seated
• Spin the blade by hand to confirm clearances, reassemble, and restore power

Fix a refrigerator that won't cool or start with this compressor start device. Works with the PTC thermistor to help your compressor run properly.

Upper left door hinge for refrigerators. Secures and aligns the top of the door to the cabinet. Replace if hinge is bent, cracked, or damaged.

This assembly includes the auger motor that rotates to push ice from the ice bucket through the dispenser chute. The motor drives the auger blade, breaking up clumped ice and moving it toward the dispenser opening when you press the ice lever or button. Replace this assembly if ice is not dispensing, you hear the motor humming but the auger isn't turning, or the ice maker is no longer producing or delivering ice.

This is the middle glass panel that sits between the inner and outer glass layers of the oven door assembly. It serves as part of the insulation system, helping to retain heat inside the oven and keep the outer door surface cool. Replace this panel if it is cracked, chipped, or shattered, which can lead to heat loss and excessive outer door temperatures.

This joint assembly is the connector that joins two refrigerator water tubes to form a tight, leak-resistant seal. Replace it to stop leaks at a line coupling and restore reliable dispenser and icemaker water flow.

• Connects two plastic water lines within the refrigerator's water system
• Maintains a watertight seal to prevent drips and air intrusion
• Common fix for leaks at a coupling or tubing that won't stay seated
• Symptoms include slow/sputtering dispenser, small/no ice production, or visible seepage at the connector

• Unplug the refrigerator and shut off the water supply before servicing
• Dispense water to relieve line pressure
• Depress the connector collar to release the tubing; cut damaged tube ends square and fully insert tubing until it bottoms out
• Restore water and power, then check all connections for leaks

Restores a tight seal around your refrigerator door to keep cold air in and warm air out. Replace when worn, torn, or cracked to maintain efficiency.

Covers and protects the internal fan while directing airflow through the refrigerator cabinet. Replace if cracked, broken, or missing to restore proper air circulation.

Fix no ice production or slow water dispenser with this water inlet valve. Controls water flow to ice maker and dispenser. DIY-friendly repair.

Broken or missing door basket letting items tip and fall? This removable shelf securely holds bottles, jars, and condiments in your refrigerator door.