Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Washer won't power on or trips breakers? A damaged power cord cuts electrical supply. Direct plug-in replacement, takes minutes to install.
Replaced failed power cord with a new one. Read more
The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.
Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.
Symptoms of a bad mounting screw include:
This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart. Read more
Secures hoses and seals to the washer tub for leak-free operation. Replace if damaged or weakened to prevent leaks. Confirm fit with your model.
Project is still on going but should be completed soon. still waiting for more warranty parts from whirlpool. not a simple repair for someone without strong mechanical ability. had to make a tool to remove and reinstall the tub clips. Read more
Secures washer panels and components to the cabinet. Replace if your mounting bracket is cracked, broken, or missing to restore proper alignment.
Color: Stainless steel
I simply removed and replaced the bake element and light bulb. The only difficulty I had was working around the open oven door. I relied on the Appliance Parts Pros videos for procedures on how to do this safely and correctly. I would not have attempted this repair without the videos. The only problem I had was the $5 screws ($10 for the two I purchased) were not the same type as the original scews and they did not "grip" the oven wall properly so I had to re-use the original screws which were... Read more
Size: 6 foot long. Washers not included. This is one hose, for a set with washers order 285363. For inlet hose screen use 285452A and for inlet hose washers use 285448A
Replaced hose and washers. Read more
Transport cover bracket that secures washer components during shipping and service. Replace if cracked, broken, or missing to prevent damage during moves.
Cleaned with alcohol then used 427 epoxy. Worked great 30 days so far no leaks. I still ordered the hose from you though. Read more
This is a replacement mounting screw used to secure panels and components on compatible Whirlpool appliances, restoring loose or missing fasteners for safe, stable operation. What it does
Secures U-shaped drain hoses or heating elements in washers. Replace if cracked, broken, or missing to prevent hose movement and potential leaks.
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ... Read more
Rubber grommet for washers. Installs to cushion components, seal openings, or protect wiring. Replace if cracked, torn, worn, or missing.
This is a leveling foot for a washing machine. A leveling foot is located at the bottom of the washing machine and can be adjusted so that the washing machine sits level on the floor, even if the floor itself is not level. There is one leveling foot included in this pack. A new leveling foot may be needed if the original is broken or stripped. If it won't hold a position, then the leveling foot will need to be replaced. These are very simple to replace, with the exception of needing to reach underneath the unit. These screw into the bottom of the washing machine. Never perform care and maintenance on an appliance that is powered on.This is a genuine Whirlpool part and is sourced directly from the manufacturer. It is sold individually. This specific leveling foot is compatible with washing machines manufactured by Whirlpool, KitchenAid, and Maytag.
Very simple, just screwed them in, leveled, then tighten bolt. You need a second person to tilt the washer back. Read more
This is a hose connector that attaches to the outlet or drain hose on the washer, ensuring a secure, leak-free connection for water flowing out of the machine. Replace this connector if you notice water leaking at the hose junction, if the connector is cracked or corroded, or if the hose keeps slipping off during the drain cycle.
Removed all external and internal hoses and washed in a bleach solution - ordered and replaced the drain hoses (internal and external). Absolutely odor free - like a new machine. Order low cost, inexpensive OEM parts that were shipped fast and fit perfectly. Read more
Fixes F02 drain error codes and slow draining. This small ball creates a seal in the tub-to-pump hose to control water flow. Simple DIY replacement.
Usually ships within 4 - 14 days
Fix soap or softener not dispensing at the right time with this washer dispenser switch. Solves detergent drawer timing issues. Simple DIY repair.
After viewing websites I found on the Internet I started troubleshooting and determined that the soap dispensing motor had seized. I then had to find the part. The local parts store told me 2 weeks so off two the Internet I went Read more
Fix a washer that fills when off or leaks at the inlet valve with this L-shaped flowmeter hose. Connects water inlet to flow sensor. Easy 30-minute repair.
Scoped out the repair online, then ordered the parts. Anticipating problems getting an old hose off, so I ordered that as well. Glad I ordered the hose; had to cut the old one off. Repair was easy, based on what I learned from online videos. Didn't even have to move the washer, which made it so much easier. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.