Kess307hbs8 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Genuine Whirlpool part

Clip, Ground Wire

By: Whirlpool

Part Number: 313660

$12.95

Compare At:: $15.41
You Save:: $2.46

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Anit-Tip Kit

By: Whirlpool

Part Number: WP9751745

$1.95

Compare At:: $2.32
You Save:: $0.37

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Wire

By: Whirlpool

Part Number: 242831

Splicing 25 Ft. Black 12 Ga. 150~c (Wire, Red 14 Ga. 200~c)

$303.25

Compare At:: $333.58
You Save:: $30.33

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

This is a replacement mounting screw used to secure panels and small components on Whirlpool appliances, restoring proper fastening to reduce rattling and prevent parts from shifting during operation. What it does

Secures panels, trim pieces or small brackets to the appliance frame or components
Helps stop loose parts that cause rattling or vibration during use
Keeps controls and external trim aligned and properly seated
Replaces missing or worn screws that can lead to unsecured panels or gaps

What's included Includes: One replacement screw Install notes

Disconnect power (and gas if applicable) before servicing the appliance
Use the correct screwdriver or driver bit to avoid stripping the head
Thread carefully and tighten until snug; do not overtighten to avoid damaging threads or plastic parts
Replace with the same screw type and size for proper fit and function

$15.59

Compare At:: $18.55
You Save:: $2.96

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Best Seller

Genuine Whirlpool part

Bake Element

4.9 (9)

By: Whirlpool

Part Number: WP9750213

The Bake Heating Element is an OEM Replacement Part for Whirlpool ovens, designed with push-on terminals. It measures 14-5/8" from the front to the mounting bracket, 19" in width, and 2-1/2" from the mounting bracket to the terminal end. The mounting holes on the bracket are spaced 1-7/8" apart, center to center. The terminals are designed as 1/4" male spades and the unit is rated for 2500 Watts at 240 Volts.

Causes of a bad bake element may include repeated heating and cooling cycles over time, electrical malfunctions, or physical damage from impact or exposure to spills.

Symptoms of a faulty bake element include:

Oven not heating up properly or taking an excessive amount of time to preheat
Hot or cold spots within the oven cavity, leading to uneven baking
Visible damage or discoloration to the bake element itself
Popping or sparking noises coming from the element area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Oven not heating evenly
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Our oven was turning out underdone baked goods. Jack H. • Jonesborough , TN • April 03, 2021

The stove is about 19 years old. We had a difficult time getting baked goods to be cooked on the inside as well as outside (bundt cakes especially). I replaced the oven temperature sensor probe, used a digital oven thermometer (as well as the older type) to measure the oven temp. The older, dial thermometer hit and pretty much stayed at the set 350 deg F. The digital one showed a plus/minus 20-degree fluctuation and all seems well. We haven't baked a bundt cake to test, yet, but we will... Read more

Genuine Whirlpool part

Broil Element (Dual)

4.6 (8)

By: Whirlpool

Part Number: WP9750967

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Burned out your broiling element in oven Steven W. • Tallahassee , FL • August 25, 2016

When I ordered the correct part from Appliance Parts Pro and, here's the big takeaway, I watched the accompanying video. With this repair there were 4 connectors coming thru 2 openings of the rear oven wall. In the video it advised to tie a twist tie around each so they couldn't slip back into the rear panel. If they did it would have required pulling the oven out, removing the back and guiding the connectors back thru the rear wall openings. TWIST TIES...Wise words!!!! Did as instructed and... Read more

Genuine Whirlpool part

Cut-Out, Thermal

5.0 (1)

By: Whirlpool

Part Number: WP341196

Do-It-Yourself Stories from Customers like You The dryer was not heating. Lynn G. • Geneva , OH • June 07, 2022

Replaced some thermal cut-offs and a cycling thermostat. Read more

Genuine Whirlpool part

Nut, Mounting

4.5 (2)

By: Whirlpool

Part Number: WP422617

Do-It-Yourself Stories from Customers like You Broken fan switch part # no longer available. Joseph H. • Argyle , TX • May 31, 2020

Be careful not to tighten or twist the small hex nut in the knob cylinder/housing with force. there is a very small plastic set tab that can be broken off easily. how do I know? The orientation of the switch "box" is horizontal instead of vertical. otherwise, this replacement part # works as expected. I couldn't get the switch to attach plate removed, and the switch removed, without removing the entire cooktop and removing the top glass burner cover. Not difficult, but time-consuming. Read more

Genuine Whirlpool part

Thermostat (Oven Lower)

5.0 (1)

By: Whirlpool

Part Number: 3149653

This lower oven thermostat regulates oven temperature for accurate baking and roasting. Replaces a failed temperature-sensing thermostat to restore consistent oven heat and reliable cooking results. What it does:

Senses oven cavity temperature and signals the control to cycle the heating element
Stops oven overheating or underheating when the thermostat is functioning correctly
Commonly replaced for inconsistent temperatures, oven running too hot/too cold, or no temperature control
Works as the lower-oven temperature regulator in ranges with separate upper/lower oven controls

What's included: One lower oven thermostat Install notes:

Disconnect power to the appliance before beginning any service
Handle the sensing bulb and capillary tube carefully; do not kink or sharply bend
Verify oven is fully cooled and remove oven racks for access before installation

Do-It-Yourself Stories from Customers like You Oven would not heat. Thomas H. • Lafayette , LA • November 06, 2017

I tested the temperature sensor with my multimeter and found it reading 2000 ohms instead of 1000. I ordered the part, installed it and saved lots of money. I was considering buying a new oven but thought I would give it a shot and with all the information available it was easy. Read more

Genuine Whirlpool part

Oven Temperature Sensor

5.0 (42)

By: Whirlpool

Part Number: WP8053344

Size: 6 inches long. Includes ceramic wire connectors.

This part fixes the following symptoms

Oven is too hot
Won't start
Oven not heating evenly
Little to no heat when baking

Do-It-Yourself Stories from Customers like You My electric oven would not fully heat up Richard Z. • Avon , MN • December 20, 2014

The first thing I did was call appliance pros. The tec told me it was a good chance it was the thermostat. He told how to test it with my ohm meter and what range it should be in. I pulled it out and tested it, which was out of the limits he told me it should be in. So I ordered the part. When it arrived in two days, I installed it. The oven now works perfect. Thank you so much. I was just about to go spend $800 on a new oven, and instead fixed it for $75. Awesome website. It was... Read more