Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This defrost heater is mounted near the evaporator coils and generates heat to melt frost buildup during the automatic defrost cycle. It helps maintain proper airflow and cooling efficiency inside the refrigerator. Replace this heater if you notice excessive frost on the evaporator coils, the refrigerator is not cooling properly, or the freezer section is warm.
Total repair took slightly over 1 hour. Would have taken longer had I not already have taken the freezer apart on a previous occasion. Therefore I already knew the sequence and was able to disassemble it quickly. A little tricky getting the part out but easier to get it in. SImple repair for anyone mechanically inclined. Read more
The Drip Pan is an OEM part for Whirlpool refrigerators. Located beneath the refrigerator, it collects and holds water that drips from the defrost system, preventing it from leaking onto the floor.
Causes of a bad drip pan can include cracks or holes from physical damage, warping from exposure to temperature fluctuations, or excessive buildup of dirt and mold.
Symptoms of a bad drip pan include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
I had my grandson, as he is more agile, replace the Drip Pan. The only real issue was the removing and reinstalling the Fan module. Strongly suggest to view the provided Video a couple of time to save frustration. As not in video, you do not need to remove the water line as the whole back panel will just fold up and out of the way. A 1/4" nut driver is the only tool you need. What drove me to replace the Drip Pan (it was cracked) was a water leak from underneath the freezer door and inside... Read more
This is a gear shaft that serves as part of the drawer slide mechanism in the freezer section of your refrigerator. It helps the freezer drawer glide smoothly in and out on its track. Replace this shaft if the freezer drawer sticks, wobbles, or does not open and close properly.
Put the new parts I bought from you on and made some fixing on the rails and done? Great part and fast shipping, thanks Read more
This metal or plastic slide rail mounts inside the freezer compartment and allows the freezer drawer to glide in and out smoothly. It supports the weight of the drawer and its contents while keeping the drawer aligned on its track. Replace this part if the freezer drawer sticks, tilts, derails, or no longer opens and closes evenly.
Freezer or fridge light not working even with a new bulb? This light socket provides the electrical connection. Basic DIY repair with video guide.
Replaced those two items listed above, please continue reading! I'm a mechanic by trade, so I have the basics. And what made this job easy? Appliance parts pros! very easy access to Part numbers and Diagrams, Online help, Customer service, and the list goes on. You will see several other sites, However! Wouldn't it be nice, knowing the above? Go no further! If you get stumped on anything during your Maintenance or Repair, They will Help. Read more
This acoustic fiber is the sound-absorbing insulation used in a refrigerator's machine compartment. Replacing a missing or damaged pad reduces operating noise from the compressor area and helps maintain the unit's intended sound levels.
Put the new filter on. Read more
Replacement icemaker fill tube that directs water from the valve to the ice tray. Replace if cracked, leaking, or causing water to freeze in the freezer.
Replaced the water tube that went from the plastic tubing to the ice cube tray. Found that even though it was the same exact length as the original, there was only an extremely small gap from the end of the tube to a splash board. This may have been the root cause of my problems. Read more
Color: clear. Measures about 11 inches wide by 7 inches high.
Bought a new one. Read more
Plastic insert that seats inside the refrigerator air damper cover to guide airflow from freezer to fresh food. Replace when cracked, broken, or missing.
The damper Cover snapped on in less then a second. Perfect fit! Read more
Creates an airtight seal to keep cold air in and moisture out. Replace when worn or torn to restore cooling performance and prevent frost buildup.
Ice not dispensing or spilling in freezer? A cracked or warped ice bucket causes jams and mess. This bin stores ice and positions it for dispensing.
We found the right ice cub bin/pan, ordered it, and it arrived quickly. Fit perfectly, and it is now catching our ice. Read more
Internal tubing that carries water from the supply valve to various refrigerator components like ice makers and dispensers. Replace if you notice water leaks inside the refrigerator or reduced water flow to dispensers.
Replaced the broken parts. The water leak was caused by the drain valve not directed into drain pan Read more
Replace a cracked, broken, or missing dairy tray on your refrigerator door. This bin installs on the door to organize butter and small items in one spot.
Had the cover but needed the tray….put cover on new tray... Read more
This limit switch monitors a set condition and opens or closes its contacts when that limit is reached. Replacing a failed switch restores proper safety cutoff and consistent operation of the appliance's heating or movement system. What it does:
I replaced the switch which was bad and also replaced the water inlet valve. Read more
Speed clip slides over panel edges to create captive threads for mounting screws. Replace worn, missing, or broken clips to restore secure attachment.
Freezer running too warm or too cold? This thermistor cover shields the temperature sensor for accurate cooling. Simple snap-in installation fixes misreads.
Took things apart after watching the videos and saw the ice maker was functional but all corroded or dirty with stuff from water and in watching the video realized the water on the floor was unrelated to the ice maker. I bought the parts to make the repair. Two comments to the videos, the one for the icemaker should show how to get the top basket out of the freezer. I found another video that showed how to do that and was much easier to get to the ice maker and to remove the back panel. ... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.