Krff305essoo Parts

Replaces the damaged front panel of your refrigerator's crisper drawer. Install when the original is cracked, broken, or missing to restore a solid grip.

This is a small spur gear used in the drawer glide assembly, typically on the left side of a refrigerator or freezer drawer. It meshes with the drawer track mechanism to allow smooth opening and closing. Replace this gear if the drawer is difficult to slide, feels rough or catches when pulled out, or if the original gear teeth are worn or broken.

Creates an airtight seal to keep cold air in and moisture out. Replace when worn or torn to restore cooling performance and prevent frost buildup.

Plastic insert that seats inside the refrigerator air damper cover to guide airflow from freezer to fresh food. Replace when cracked, broken, or missing.

Refrigerator freezer drawer glide gear that attaches to the rear shaft. Replace if broken, cracked, or missing tabs cause your basket to lean or fall off track.

This slide rail allows dishwasher racks to glide smoothly in and out of the dishwasher tub for easy loading and unloading. It mounts to the side of the dishwasher interior and supports the weight of loaded dish racks. Replace this rail if your dishwasher rack is difficult to pull out, doesn't slide smoothly, or if the rack tilts or binds when moving.

The Drawer Slide Rail is an OEM part for Whirlpool refrigerators. It allows movement of the refrigerator drawer.

A bad drawer slide rail can be caused by regular use, wear and tear, or accidental damage. If you experience issues such as the drawer sticking, not sliding smoothly, or falling off the rail, it may indicate a problem with the slide rail.

Symptoms of a bad drawer slide rail include:

• Difficulty in opening or closing the refrigerator drawer
• Uneven or jerky movement of the drawer
• Drawer falling off or not staying in place

Replace your faulty drawer slide rail with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This combo device is a small electronic module used in select appliances to integrate multiple functions into one component. Replacing a faulty module helps restore reliable operation of the system it supports.

• Combines two sub-functions in a single, compact electrical device
• Interfaces with the appliance's main control through a wired connector
• A failed device can cause the related feature to stop working or trigger fault codes
• Present as intermittent operation of the associated feature

• Disconnect power before servicing; verify no voltage is present
• Access location per service manual; note and label connector orientation
• Handle electronics with ESD care; avoid touching pins/contacts
• Route and secure wiring as originally; perform a diagnostic/self-test after installation

Replace a cracked, broken, or missing dairy tray on your refrigerator door. This bin installs on the door to organize butter and small items in one spot.

This limit switch monitors a set condition and opens or closes its contacts when that limit is reached. Replacing a failed switch restores proper safety cutoff and consistent operation of the appliance's heating or movement system. What it does:

• Senses a limit condition at its mounting point (such as temperature or travel/position, depending on model)
• Changes state at a defined threshold to protect components and wiring
• Interrupts power to heat or motor circuits, or signals a control to respond
• Common failure signs: no heat or shuts down early, runs continuously, won't start, or intermittent operation

• 1 limit switch

• Disconnect power to the appliance before servicing
• Note wire positions; transfer connectors one at a time or take a photo for reference
• Reinstall in the original orientation so the actuator or sensing surface contacts the correct area
• Address root causes (blocked airflow, binding mechanisms, shorted components) to prevent repeat failures

Speed clip slides over panel edges to create captive threads for mounting screws. Replace worn, missing, or broken clips to restore secure attachment.

This electronic control board manages key refrigerator functions including compressor operation, defrost cycles, and temperature regulation. It receives input from sensors and user controls to maintain proper cooling in both the fresh food and freezer compartments. Replace this board if the refrigerator is not cooling, displays error codes, runs continuously, or exhibits erratic temperature behavior.

Vessel water filter that replaces the refrigerator's vessel-style cartridge to restore filtered water delivery and reduce visible particles, off tastes and odors at the dispenser and ice maker for clearer, better-tasting water. What it does:

• Filters water flowing through the vessel cartridge to reduce sediment and visible particulate in dispenser output.
• Helps improve taste and odor commonly noticed when a filter is aged or clogged.
• Addresses symptoms such as discolored water, stray particles in dispensed water, or unpleasant dispenser/ice taste.
• Restores expected filtration performance when an old or saturated vessel cartridge is the source of water-quality complaints.

• Turn off the refrigerator water supply and before beginning replacement.
• Remove the old vessel cartridge per OEM instructions and install the new filter in the same orientation.
• After installation, run the water dispenser until the water runs clear to purge air and any loose media.
• If you see leaks or continue to have water-quality or flow issues after replacement, shut off the water.

The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly. 

Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption. 

Symptoms of a bad screw include:

• The refrigerator door seems misaligned or does not close properly.
• Increased effort needed to open or close the door.
• Unusual gaps around the door seal when closed.
• The door might squeak or make other noises during operation.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Fix water leaks in your refrigerator's ice maker or water line. This tube insert reinforces plastic tubing for leak-resistant compression fittings.

Freezer door handle for bottom-mount refrigerators. Installs on the freezer drawer to provide grip for opening and closing. Replace if cracked or loose.