Kuda220tl2 Parts

This retaining clip secures the dishwasher's upper rack adjustable arm so the arm stays in place during loading and cycles. Replacing a broken or worn clip helps restore proper rack positioning and prevents the arm from detaching. What it does

• Holds the adjustable upper rack arm in its mounting location to prevent slipping or separation.
• Keeps the upper rack level and aligned during door operation and cycle movement.
• Common symptom: adjustable arm slips, detaches, or the upper rack won't stay level.
• Works quietly and unobtrusively once installed; prevents further wear to the arm pivot.

• Clip typically snaps into place on the adjustable arm; remove or lower the upper rack for easier access.
• Disconnect power to the appliance before performing any repairs and follow the manufacturer's service instructions.
• Wear gloves to protect hands from sharp sheet-metal edges.

Touch-up paint for repairing small chips, scratches and scuffs on painted appliance surfaces. Restores the appearance of localized damage so repaired areas better blend with the surrounding finish. What it does:

• Covers small chips and surface scratches to improve cosmetic appearance.
• Helps conceal finish wear on painted metal and plastic trim.
• Lets you spot-repair without replacing large panels or parts.
• Works for quick, visible fixes where full repainting isn't needed.

• Clean and dry the repair area thoroughly before applying; remove loose paint or rust.
• Test on an inconspicuous area first to confirm color match and compatibility.
• Apply sparingly in thin coats with a small brush or cotton swab; allow each coat to dry before adding more.
• Use in a well-ventilated area and keep out of reach of children; follow any handling instructions on the product label.

Bottle with brush. Color: Platinum. Size: 0.6 fl.oz.

This is a 10-16 x 1/2 inch appliance screw used to secure panels and components on compatible Whirlpool laundry and kitchen appliances. It restores a secure fit when a fastener is missing or stripped. What it does

• Fastens trim, panels, brackets or small components to the appliance chassis
• Replaces a lost or damaged factory screw to stop rattling or loose parts
• Matches OEM thread and length for proper engagement and holding strength
• Helps maintain alignment and safe operation of the attached part

• Use the correct screwdriver or nutdriver to avoid stripping the head
• Tighten until snug—do not overtighten to prevent damage to threads or sheet metal
• Disconnect power and follow the appliance manufacturer's safety instructions before servicing

Color: White. Size: 13 oz. Spray paint primer. can.

This upper rack roller guides the dishwasher's top rack along its track. Replacing a worn or broken wheel restores smooth sliding and proper alignment so you can load and unload without sticking, derailing, or grinding.

• Supports and guides the upper rack on its rail
• Restores smooth in-and-out travel of the rack
• Helps keep the rack aligned to prevent derailing
• Replaces a worn, cracked, or missing wheel causing sticking or scraping noises

• Disconnect power and water supply before servicing
• Pull the upper rack forward; remove rack stops/end caps if equipped
• Lift the rack out, remove the damaged roller from its post/axle, and snap the new roller into place
• Reinstall the rack and stops; verify the rack rolls smoothly before use

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Bottle with brush. Color: Harvest Gold. It's 0.6 fluid ounces.

This door tension spring restores proper door balance and helps doors open and close smoothly and safely. Replace a worn or broken spring to reduce slamming and restore normal door operation. What it does:

• Provides counter-tension so the appliance door stays open at intended angles and closes without excessive force
• Helps prevent door slamming, sudden drops, or doors that won't stay open
• Restores proper alignment and smooth movement when the original spring is stretched, rusted, or broken

• One door tension spring

• Unplug the appliance or disconnect power before starting work; if gas-equipped, shut off gas supply per manufacturer instructions
• Support the door while removing or installing the spring to prevent sudden movement or injury
• Use appropriate hand protection; inspect mounting points and replace any worn clips or hardware as needed

This clamp secures a flexible appliance hose to a fitting to help prevent leaks and keep connections tight. It's a small but essential part that restores a proper seal on water or drain lines. What it does:

• Holds a hose firmly to a tailpiece, barb or connector to reduce leaks and hose slippage
• Helps stop intermittent dripping or pooling caused by loose hose connections
• Restores a proper seal after hose replacement or maintenance
• Works on common appliance water/drain lines where this clamp style is used

• One hose clamp

• Disconnect power and shut off water to the appliance before starting any work
• Allow the appliance and hoses to cool if recently used; use gloves and eye protection
• Use appropriate pliers or a screwdriver (depending on clamp style) to remove and install the clamp; avoid over-tightening
• Inspect the hose and fitting for damage; replace the hose if cracked or worn

This overfill control switch (float switch) senses water level and helps stop the fill valve to prevent overfilling. It replaces a worn or failed water-level safety switch to restore proper fill control and reduce overflow risk. What it does:

• Detects high water level and signals the washer control to stop filling
• Helps prevent water overflow and unintended flooding when working correctly
• Commonly linked to symptoms like continuous filling, overfilling, or washer not advancing cycles
• Interfaces with the washer control board and fill valve to maintain proper water level

• One overfill control switch (float switch)

• Disconnect power and turn off water supply before starting any repair
• Handle connectors gently; confirm wiring positions or take a photo before disconnecting
• Verify proper operation after installation by running a short fill cycle and checking for correct shutoff

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This small black clamp secures a hose, tube or wiring harness to prevent movement and abrasion. It's a direct-fit replacement used to keep connections stable so lines stay routed and protected during normal appliance operation. What it does

• Holds small hoses, tubing or wiring harnesses firmly in place
• Prevents chafing and accidental disconnection from vibration or movement
• Helps maintain routing to reduce stress on attached components
• Commonly used where a compact, non-corrosive clip is required

• Disconnect power before servicing any electrical appliances
• Use appropriate hand tools; avoid over-tightening which can damage hoses