Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This clamp secures a flexible appliance hose to a fitting to help prevent leaks and keep connections tight. It's a small but essential part that restores a proper seal on water or drain lines. What it does:
Seals the pump housing to prevent water leaking from the tub onto the motor. Replace if you see leaks around the circulation pump area. Confirm fit by model.
1. To fix the leaks from around the door, I replaced the upper and lower door seals. These were purchased in a separate transcation, so they are not the parts shown here. The upper door seal worked as intended, but the lower seal would not stay in place on the lower edge of the door during a wash. Therefore I cleaned the grease and detergent off the old seal, and installed using silicone sealer/adhesive. The plastic edge pieces for the lower seal were supplied with the kit, and they installed... Read more
Usually ships within 4 - 14 days
Fix a dishwasher that won't drain or displays motor error codes with this drain pump motor assembly. Moderate DIY repair taking about 2 hours to complete.
The PC board was bigger than the original so had to modify the mounts, the pump and rotor are pretty straight forward but would have much easier with another pair of hands. It took about 2 hours start to finish. One and a half days to get the parts, fantastic service. A new dishwasher is $1300.00. the parts were $314.00, so more than worth fixing. Read more
Detergent cup won't open during wash cycle? This bi-metal actuator heats and flexes to release the dispenser door at the right time. Moderate repair.
Replaced the Bi-Metal switch. Read more
Replacement door spring for dishwashers. Restores proper tension to prevent door from dropping or falling when opened. Install to replace broken, worn, or weak springs.
Screw for wash impeller.
0.6 oz. platinum touch-up paint with brush for appliances. Repairs scratches, chips, and gouges on doors, handles, and trim panels. Acrylic formula.
Fix dishwasher overflowing or water leaking from door bottom with this overfill control switch. Senses water level to prevent overfills. Easy DIY fix.
I replaced float sensor switch and it fixed it. Read more
Receiver that attaches to the upper wash rack and connects to the water delivery tube. Replace if cracked, deteriorated, or missing seal component.
Replaced the delivery tube and receiver which is attached to the top wash rack. When the top wash rack is pushed in to close the washer door the seal is made to deliver the wash eater through the tube to the upper spray head. No tools required just push on the rubber components on and the unit is up and running Read more
Wet vacuumed to clean and remove water. Replaced broken impeller, lower wash arm and minor associated parts. Washer is working well after repair! Thanks for your fast service!!!!! Read more
Color: White. Size: 1 qt. can. Acrylic appliance paint.
Replace your dishwasher's worn or missing washer. Installs on spray arm pipe or door components. Needed when old washer is cracked or damaged.
Removed dishwasher to replace spray arm pine--I replaced washer on pipe, too, and would recommend doing this just on principal. Removing dishwasher requires disconnecting power, water, and drain line--tools will vary depending on connections. i replaced drain line because original install was not done correctly--hose too short--You could probably do just this w/o pulling unit. All parts arrived very quickly and fit correctly. Read more
Replace your dishwasher's pump thermostat o-ring seal to prevent leaks and maintain proper water circulation. Essential when you notice water pooling or temperature issues. Verify fit with your model number before ordering.
O-ring seal for dishwasher turbidity sensor. Replace if you notice leaking around the sensor or water pooling inside the dishwasher. Confirm fit with model.
Fix a dishwasher that's melting plastic or overheating during heated dry with a new high limit thermostat. Moderate DIY repair in under an hour.
If your dishwasher won't start or suddenly stopped working, a blown thermal fuse is often the cause. This safety part protects against overheating.
I ordered a "Thermal Fuse" for a Whirlpool dishwasher. The part didn't fit in the old slot, nor did the tabs fit perfectly in the electrical connections, but it was the best I could find. I suppose the machine is too old to have current repair parts. But, it made the dishwasher work. The fuse is now hanging outside the control panel cover, connected, and working just fine. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.