Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines. Read more
This factory-specified screw secures panels, brackets, and internal components in your appliance. Replacing worn or missing hardware restores a tight fit to help reduce vibration, noise, and premature wear.
My son fixed the issue of some wear and tear. Read more
Seal included. This sump housing assembly includes a 32.17 millimeter hole for the thermistor. If the hole for the thermistor is 31-31.5 millimeters you will need to order WP8534882.
I noticed the floor around the dishwasher was starting to get wet and warp the wooden floor. The chopper had gotten out of line and had cut a pinhole into the sump housing and the dishwasher was leaking badly. It was quite easy to repair. Just unhook the drain hose and the wire connectors, twist off the turbidity sensor and waste motor, pull out the shims and the whole assemple comes up and out. The hardest part was pulling the motor off of the assembly, since I wasn't sure if I needed to... Read more
This inlet protector is the coarse screen that covers the dishwasher's pump/sump inlet, blocking large debris from entering the wash system. Replacing a damaged or missing protector helps maintain water flow and protect the pump from jams or wear.
Looked at Dishwasher. Scratched head and armpit. Told wife I would fix, not repariman. Wife skeptical - shook head. Found schematic on web. Found YouTube video of guy repairing same DW model. Disassembled. Diagnosed problem. Chopper assembly welded in place by water scale -broke removing. Potty mouth. Ordered parts. Waited for parts. Washed dishes by hand. Wife doing ok. Parts arrived (in only a day or two!!! Fed Ex for 7 bucks!! Great deal). Put on nasty t-shirt, baggy shorts. ... Read more
Color: Stainless Note: Comes with Allen wrench, spare set screw, and instructions.
Ordered the dishwasher cover and handle. The cover arrived damaged, but no problem for Appliance Parts Pros - they had a replacement to me the next day!!!!! OUTSTANDING service. and everything fits perfectly. SIX STARS!!!!!! Read more
Color: gray. Measures about 3 inches wide by 1-1/2 inches high.
With the basket out of the dishwasher, the plastic parts basically snap on and off... popped the broken parts off and the new parts on. The 2 wheel and mount assemblies were a little more complicated. The video on the website advises to disconnect the supply line and drain line... I didn't have to do this. I just pulled the dishwasher out of its cabinet a little over a foot and removed the 2 screws holding each assembly in place and removed them. The previous gaskets (2 PER ASSEMBLY)... Read more
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Replaced It With New One Read more
This hanger anchors the dishwasher's door-balance spring to the frame so the door opens and closes smoothly. Replacing a worn or broken hanger restores proper spring tension and helps prevent a door that drops, slams, or feels heavy.
Found a great extensive list of available parts for our dishwasher model on the website. Reference to videos made the repair steps very clear and easy to follow. Read more
Color: light gray. Measures about 3 inches high by 6 inches deep.
Part needed replacement Read more
This mount secures the dishwasher's upper spray arm to its water feed, keeping the arm aligned and free to rotate so the upper rack receives consistent spray coverage and dependable cleaning.
Replaced all leaky parts including the wash arm that send water to the top rack. Most parts are just snap-in and one required a single screw. Very easy job. Read more
This overfill control float assembly sits in the dishwasher tub and rises with the water level. It works with the float switch to shut off the inlet valve, helping prevent overfilling and potential leaks.
Removed front kick plate, found overflow valve assembly leaking . When parts arrived removed and replaced overflow valve. Took about 10 minutes Read more
Color: gray. Measures about a 1/2 inch wide by 3 inches high by 1-1/2 inches deep.
To eliminate ordering parts that are working, I went to hardware store to get a multimeter to test and confirmed the continuity of the themal fuse and the door switches are working. Saw another reviewer post a similar problem and I went with the solution by replacing the panel-ctl. Ordered the part, replaced it after receiving the delivery package, turned the breaker back on, ran a test cycle, et voila, it works as new. Sidenote, to reset the dishwasher, I pushed " hi-temp dry, "energy... Read more
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more
Includes vinyl rack repair touch up paint and tine tip covers. Color: Grey
12 Ft in length
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly. Read more
This cover screw secures an appliance cover or access panel to the cabinet, protecting internal components and reducing vibration. Replace missing, stripped, or corroded screws to keep panels tight and the unit safe and quiet.
I custom cut out a plastic washer to hold the worn screw in place. For months, I added a small strip of duct tape to the screw's threads, which would often stay in tact for a few days. But eventually, the tape would heat up and the adhesive and moisture would cause the spray arm to detach. I found the replacement screw on your web site, and ordered it. The screw was a perfect match and now the spray arm works the way it should. I stil use the plastic washer I made, since the flange replacement... Read more