Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kudm25sh Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Dispenser Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10616003

The Dispenser Assembly is an OEM part for Whirlpool dishwashers. It is responsible for dispensing detergent and rinse aid at the appropriate times during the dishwashing cycle, ensuring optimal cleaning and drying performance. The assembly includes compartments for detergent and rinse aid, which are released automatically by the dishwasher.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad Dispenser Assembly include:

  • Improper dispensing of detergent or rinse aid
  • Insufficient cleaning or rinsing results
  • Leaks or drips from the dispenser area
  • The dispenser door not opening or closing correctly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You Soap dispenser door would not latch closed   Lee J. • Lumberton , NJ • January 27, 2015

Looked online for a replacement soap dispenser. Found one on several sites but The A.P.P. site showed the part on a Parts breakdown page and showed the part item number. and the actual part number. I ordered the part and expected the part to show up in about 5-7 days, as per the receipt. The part showed up in 2 business days. I installed the part and the dishwasher works as new. Thanks A.P,P. Read more

More
$164.43
Compare At:
$197.32
You Save:
$32.89

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Drain Cover Gasket (Dishwasher)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9740674

This drain cover gasket seals the drain/pump cover at the bottom of the dishwasher tub to keep wash water contained. Replacing a cracked or flattened gasket helps stop leaks from the base and protects nearby components.

  • Creates a watertight seal between the drain cover and sump opening
  • Helps prevent leaks onto the floor or into the dishwasher base during cycles
  • Common signs of failure: puddles beneath the unit, dampness in the base, or a visibly hardened/cracked gasket
  • Good practice to replace when the drain cover is removed for service to ensure a proper reseal
What's included: 1 drain cover gasket Install notes:
  • Disconnect power and shut off water supply before servicing
  • Remove the lower rack (and spray arm if required) to access the drain cover per your model
  • Clean mating surfaces; install the new gasket evenly without twists
  • Reassemble and run a short cycle while checking for leaks

Do-It-Yourself Stories from Customers like You Debris got into the impeller and broke it   Thomas L. • Westport , MA • November 30, 2014

Replaced the drain & wash impeller kit. Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Wash Arm Tube Holder
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3378186

Dishwasher middle wash arm manifold tube holder. This holder will have a split at the 3:00 position for easy removal from the manifold tube.

Do-It-Yourself Stories from Customers like You Small part on upper dishrack failed.   Charles S. • Carson City , NV • June 30, 2023

Part was exact item. Easy repair. Read more

More
$22.95
Compare At:
$27.31
You Save:
$4.36

IN STOCK
Ships Today Guaranteed
Add to Cart
Door Spring Bushing (Dishwasher)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3373234

This dishwasher door spring bushing—also called a door spring bearing—sits at the spring's frame anchor to provide a pivot and reduce wear. Replacing a worn bushing restores door balance and helps prevent the door from dropping or slamming open.

  • Provides the pivot/anchor surface for the door spring at the cabinet frame
  • Maintains balanced door opening and closing force
  • Reduces friction, wear, and squeaks at the spring connection
What's included: Includes 1 bushing. Install notes:
  • Disconnect power at the breaker and shut off water supply.
  • Remove the toe panel and mounting screws; slide the dishwasher out slightly to access the door springs.
  • Support the door, release spring tension, replace the bushing at the frame anchor, and reattach the spring.
  • Inspect both sides and replace worn components in pairs to keep door tension even.

Do-It-Yourself Stories from Customers like You The dishwasher door spring broke.   Rachael T. • Junction City , OR • November 07, 2022

I ordered the parts, deciding that if one spring had broken, the other one should probably be replaced at the same time. I followed the suggestion of ordering the door spring bearing given on the ordering page, and since I had not yet pulled out the dishwasher, did not know that it was not used in this older model. However, the order arrived quickly (4 days), and they are genuine Whirlpool, made in the USA, parts. The access to the sides of the dishwasher where the springs are attached... Read more

More
$6.95
Compare At:
$8.27
You Save:
$1.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Manifold Tube
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3378144

This is the dishwasher manifold tube only. It attaches to the bottom of the upper rack. For the complete kit order 675808. Also consider checking the mount that attaches this manifold tube to the dishrack. For the mount order WP8539324.

Do-It-Yourself Stories from Customers like You Rotted manifold tube   Joseph L. • Hermantown , MN • December 26, 2015

Part was updated from original equipment (3 pieces) to a one piece tube. Snip the top of hanger loop then install. Just a couple minute job. Updated tube is much better than the original design. Read more

More
$44.95
Compare At:
$53.94
You Save:
$8.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Touch Up Paint - Blk
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032

Bottle with brush. Color: Black. Size: 0.6 fl.oz.

Do-It-Yourself Stories from Customers like You Leaking diaphragm   Herbert S. • Monroe Township , NJ • January 03, 2015

Replaced It With New One Read more

More
$17.76
Compare At:
$21.13
You Save:
$3.37

IN STOCK
Ships Today Guaranteed
Add to Cart
Pump Outlet
Genuine Whirlpool part
By: Whirlpool
Part Number: 8194582

includes seal

Do-It-Yourself Stories from Customers like You Pump needed replacement cause nut that holds it on melted to the threads.   Deborah S. • Lincoln , NE • November 06, 2017

Replaced nut and then found we needed new pump. Read more

More
$52.33
Compare At:
$62.80
You Save:
$10.47

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

Do-It-Yourself Stories from Customers like You Broken handle foot pedal and missing parts   Donald M. • Lake Arrowhead , CA • April 05, 2015

This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Today Guaranteed
Add to Cart
Inlet Base Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP302710

This inlet base seal is a gasket that fits between the inlet base and its mating surface. Replacing a worn seal helps maintain proper airflow through the inlet path and keeps spills and debris out of internal components.

  • Forms a tight, continuous seal at the inlet base-to-housing joint
  • Helps preserve correct airflow through the inlet path
  • Blocks liquids, grease, and crumbs from leaking into the appliance interior
  • Replace if the seal is cracked, flattened, brittle, loose, or you see visible gaps
What's included: One inlet base seal.
  • Disconnect power to the appliance before servicing
  • Remove grates/cartridges, filters, or trim as needed to access the inlet base
  • Clean and dry mating surfaces; install the new seal in the same orientation without stretching or twisting
  • Reassemble and verify the seal sits evenly with no gaps

Do-It-Yourself Stories from Customers like You Leaks from around the door and from the pump motor   Samuel M. • Sudbury , MA • January 12, 2016

1. To fix the leaks from around the door, I replaced the upper and lower door seals. These were purchased in a separate transcation, so they are not the parts shown here. The upper door seal worked as intended, but the lower seal would not stay in place on the lower edge of the door during a wash. Therefore I cleaned the grease and detergent off the old seal, and installed using silicone sealer/adhesive. The plastic edge pieces for the lower seal were supplied with the kit, and they installed... Read more

More
$6.63
Compare At:
$7.89
You Save:
$1.26

IN STOCK
Ships Today Guaranteed
Add to Cart
Touch Up Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392899

Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.

Do-It-Yourself Stories from Customers like You Lack of accurate control on 2 electric range burners   Jeff D. • Neenah , WI • April 09, 2016

Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job. The fix only took about 15 minutes because I was prepared after watching the video. Read more

More
$17.76
Compare At:
$21.31
You Save:
$3.55

IN STOCK
Ships Today Guaranteed
Add to Cart
Drain Hose Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3374077

Size: 7 foot long.

Do-It-Yourself Stories from Customers like You Bought a used dishwasher in excellent shape that needed the drain pieces to get it going   Johnny R. • San Antonio , TX • April 14, 2015

Bought the parts and connected same...a breeze in finding and receiving and eventually installing these parts. Read more

More
$62.78
Compare At:
$74.71
You Save:
$11.93

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 350956

Almond. Size: 13 oz. can. Acrylic appliance paint.

Do-It-Yourself Stories from Customers like You Age no money to fix it   Ronald V. • Cape Coral , FL • August 01, 2015

Was able to match it pretty well the natural age difference was good. The delivery of the product was amazing it took less than 24 hours to get to me and that was standard shipping. Give you guys an A for great !! Read more

More
$30.52
Compare At:
$36.32
You Save:
$5.80

IN STOCK
Ships Today Guaranteed
Add to Cart
Handle Spring (Door Latch), 1 Spring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9743573

This handle spring restores tension to the door latch handle so the dishwasher door latches securely and the handle returns to position. Replace a worn or broken spring to address loose handle feel or doors that pop open during a cycle. What it does:

  • Provides return tension for the door latch/handle mechanism
  • Helps keep the door closed and latched during operation
  • Restores proper handle feel and return action
  • Common symptoms include a loose or floppy handle, door not latching or starting, or door opening mid-cycle
What's included:
  • 1 spring
Install notes:
  • Disconnect power at the breaker and shut off water before servicing
  • Remove inner door panel screws to access the latch area; support the outer panel
  • Note spring orientation and attachment points before removal; transfer the new spring to the same tabs/holes
  • If your latch uses two springs, replace both for even tension; test latch operation before reassembly

Do-It-Yourself Stories from Customers like You Door handle broke   Matt H. • Westville , IL • January 15, 2017

Ordered new door handle and replaced it Read more

More
$7.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Check Ball
Genuine Whirlpool part
By: Whirlpool
Part Number: WP719929

This small check ball sits inside a check valve to allow one-way water flow. Replacing a worn or missing ball helps prevent backflow and supports reliable draining performance between cycles.

  • Maintains one-way flow through the valve to stop water from returning after the pump stops
  • Helps ensure complete, consistent draining
  • A damaged, swollen, or missing ball can let water back up into the tub/sump
  • Contribute to slow or intermittent draining and unusual gurgling/flow noises
What's included: 1 check ball. Install notes:
  • Disconnect power and shut off water before servicing
  • Access the check valve assembly per your model's service information (commonly at the sump, pump outlet, or drain connection)
  • Clean the valve seat/passage; remove debris that could prevent sealing
  • Place the ball in the valve seat as shown in your model's parts diagram; reassemble and test for leaks and proper flow

Do-It-Yourself Stories from Customers like You Dishwasher didn't drain   Frank C. • Mcallen , TX • June 02, 2016

Cleared out trash from pump. Made E-Z by your exploded views and videos. Replaced worn parts. Read more

More
$6.95
Compare At:
$8.34
You Save:
$1.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Circulation Pump And Motor Assembly (Dishwasher)
Genuine Whirlpool part
By: Whirlpool
Part Number: W10428773

This circulation pump and motor assembly moves wash water through your dishwasher's spray arms to clean dishes. Replace a worn or seized wash motor to restore proper spray pressure, quieter operation, and consistent cleaning performance.

  • Circulates wash water through the spray arms during wash and rinse cycles
  • Restores cleaning performance when the original wash motor won't run or is weak
  • Typical symptoms: no/weak spray action, dishes still dirty, loud humming or grinding during wash
  • Leaks at the pump housing or shaft area can indicate the assembly has failed
What's included: 1 circulation pump and motor assembly Install notes:
  • Disconnect power at the breaker and shut off the water supply before servicing
  • Remove the toe panel and slide the dishwasher out to access the underside
  • Have a towel or pan ready for residual water; disconnect wiring and hoses, noting their orientation
  • Transfer and secure existing clamps/mounting hardware as needed; ensure seals are properly seated and test for leaks after reassembly

Do-It-Yourself Stories from Customers like You Blown dishwasher pump.   Paul M. • Littleton , CO • December 10, 2018

I called AppliancePartsPros, talked to a technician to validate problem, ordered part. I had a great talk with the technician. Told him I have electrical engineering experience, used to fix pinball machines and that the pinballs and home appliances were the same design, i.e. inductor in series with a switch across the hot lines. After that the conversation was like two long lost cousins talking at a family barbeque! Great customer service! Read more

More
$343.73
Compare At:
$407.65
You Save:
$63.92

IN STOCK
Ships Today Guaranteed
Add to Cart
Touchup-Alm
Genuine Whirlpool part
By: Whirlpool
Part Number: WP72107

Color: Almond

Do-It-Yourself Stories from Customers like You Broken meat drawer   Jesse B. • Stow , MA • January 26, 2015

Replaced. Shippping was very fast. A good experience. Read more

More
$14.95
Compare At:
$17.79
You Save:
$2.84

IN STOCK
Ships Today Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store