Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Seals the pump housing to prevent water leaking from the tub onto the motor. Replace if you see leaks around the circulation pump area. Confirm fit by model.
1. To fix the leaks from around the door, I replaced the upper and lower door seals. These were purchased in a separate transcation, so they are not the parts shown here. The upper door seal worked as intended, but the lower seal would not stay in place on the lower edge of the door during a wash. Therefore I cleaned the grease and detergent off the old seal, and installed using silicone sealer/adhesive. The plastic edge pieces for the lower seal were supplied with the kit, and they installed... Read more
Usually ships within 4 - 14 days
Replacement spring kit that restores tension and balance to dishwasher doors. Use when springs are broken, worn, or missing, causing door sag or noise.
One of the two springs on our 25-year-old dishwasher broke with a loud "bang" five days ago. This is an easy fix, involving the removal of only the bottom access panel (two screws). However, we have a wooden insert covering the door, so that the dishwasher matches the cabinets. This makes the door MUCH heavier than normal, and so the door springs are not stock, but are heavy-duty. I didn't know what springs to buy. Fortunately, Appliance Parts Pros has a forum where experts provide advice.... Read more
Insulation pad that fits behind dishwasher panels to restore thermal protection and reduce noise. Replace if damaged, missing, or rattling occurs.
Detergent cup won't open during wash cycle? This bi-metal actuator heats and flexes to release the dispenser door at the right time. Moderate repair.
Replaced the Bi-Metal switch. Read more
Dishwasher door seal prevents water leaks between the console and door. Replace if you notice leaking during cycles or visible wear. Confirm fit with model.
I ordered this seal however, it was the door seal leaking. I returned this one and the install on the other one went great. Read more
Secures knobs, trim, or linkages to shafts inside your dishwasher. Replace if broken, cracked, or missing to prevent components from loosening.
Screw for wash impeller.
Fix a dishwasher that won't fill properly or overfills with this overflow switch lever. Restores water level detection. DIY-friendly repair.
0.6 oz. platinum touch-up paint with brush for appliances. Repairs scratches, chips, and gouges on doors, handles, and trim panels. Acrylic formula.
Filters lint and debris from wash water before reaching the drain pump. Replace if cracked or clogged to restore proper draining. Confirm fit by model.
Replacement silverware basket for dishwasher lower rack. Holds utensils upright and separated during wash cycles. Order if yours is cracked or missing.
This is the center lid that fits into the washing basket/tub assembly to cover the center opening and help contain laundry during the wash cycle. It restores a proper seal and keeps items from entering the agitator area. What it does:
Bought exact replacement basket from AppliancePartsPro, removed old basket put in new basket. Read more
Factory replacement access panel cover for dishwashers. Protects internal wiring and controls from dust and accidental contact. Needed when cracked or missing.
Door slams shut or won't stay open? Replace the tension spring to restore proper door balance. Easy DIY repair—most complete it in under 30 minutes.
I removed the lower door panel and kickplate (4 screws) to access the door springs. Replaced the door springs by hand. The nylon guides, through which the door guides travel, were easy to replace. I removed the broken ones and snapped in the new ones. I recommend a drop of epoxy on the upper portion of each guide to keep it from shifting. The impact on the door apparently distorted the frame slightly so the door drops slightly below level when fully opened and the lower rack movement is impeded... Read more
Fix dishwasher overflowing or water leaking from door bottom with this overfill control switch. Senses water level to prevent overfills. Easy DIY fix.
I replaced float sensor switch and it fixed it. Read more
Receiver that attaches to the upper wash rack and connects to the water delivery tube. Replace if cracked, deteriorated, or missing seal component.
Replaced the delivery tube and receiver which is attached to the top wash rack. When the top wash rack is pushed in to close the washer door the seal is made to deliver the wash eater through the tube to the upper spray head. No tools required just push on the rubber components on and the unit is up and running Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.