Kuds01flss6 Kitchenaid Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11631670
This factory-specified screw secures panels, brackets, and internal components in your appliance. Replacing worn or missing hardware restores a tight fit to help reduce vibration, noise, and premature wear.
- Fastens sheet metal, brackets, or plastic parts as designed by the manufacturer
- Helps maintain alignment and reduce vibration/rattling
- Direct replacement for stripped, corroded, or missing screws
- Common signs: loose panels or trim, shifting components, screw won't tighten
What's included: One screw Install notes:
- Disconnect power; shut off water or gas supply if applicable
- Use the correct driver to avoid stripping the head
- Start threads by hand to prevent cross-threading; tighten snugly without overtightening
- Replace one-for-one in the original location per service information
Do-It-Yourself Stories from Customers like You
Some accessories were worn. Wayne C. • Massapeqau Park , NY • April 15, 2020
My son fixed the issue of some wear and tear.
Read more
More
$12.13
- Compare At:
-
$13.34
- You Save:
-
$1.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268895
Fix dishwasher overflows and leaks with a new float assembly. Controls water level to prevent overfilling. Moderate DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Kitchenaid dishwasher kudp02frss2 leak at float switch at front right of unit Richard B. • Mahwah , NJ • December 02, 2016
Removed bottom cover, located leak at float switch, removed and replaced float switch kit.
The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the...
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8531857
Standing water or dirty dishes? A clogged or damaged pump inlet screen blocks debris from the wash system. Simple DIY fix restores drainage and cleaning.
Do-It-Yourself Stories from Customers like You
Clogged at the chopper assembly strange noisehopper assembly broken Thomas H. • Idaho Falls , ID • July 07, 2015
Looked at Dishwasher. Scratched head and armpit. Told wife I would fix, not repariman. Wife skeptical - shook head. Found schematic on web. Found YouTube video of guy repairing same DW model. Disassembled. Diagnosed problem. Chopper assembly welded in place by water scale -broke removing. Potty mouth. Ordered parts. Waited for parts. Washed dishes by hand. Wife doing ok. Parts arrived (in only a day or two!!! Fed Ex for 7 bucks!! Great deal). Put on nasty t-shirt, baggy shorts. ...
Read more
More
$78.95
- Compare At:
-
$93.16
- You Save:
-
$14.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268713
Replaces damaged dishwasher dishrack wheel assembly. Installs on upper or lower rack for smooth rolling. Needed when wheels crack or tabs break.
Do-It-Yourself Stories from Customers like You
Whirlpool dishwasher lower rack wheel assembly. Gregory Z. • Missoula , MT • March 01, 2019
Ordered wheel assembly. Received in a couple of days. Easy FIT project. Problem solved.
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8539190
Gray plastic pivot clip for dishwasher upper rack tine rows. Replaces broken, cracked, or missing pivots that prevent tines from adjusting properly.
Do-It-Yourself Stories from Customers like You
2 broken "wheel and mount assemblies" (same side) and a few misc upper basket plastic part were broken Michael B. • Wellington , FL • December 29, 2015
With the basket out of the dishwasher, the plastic parts basically snap on and off... popped the broken parts off and the new parts on. The 2 wheel and mount assemblies were a little more complicated. The video on the website advises to disconnect the supply line and drain line... I didn't have to do this. I just pulled the dishwasher out of its cabinet a little over a foot and removed the 2 screws holding each assembly in place and removed them. The previous gaskets (2 PER ASSEMBLY)...
Read more
More
$48.46
- Compare At:
-
$57.18
- You Save:
-
$8.72
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$23.71
- Compare At:
-
$28.21
- You Save:
-
$4.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268349
This bracket mounts inside the dishwasher tub and supports the middle spray arm manifold tube, holding it securely in position. It ensures the spray arm tube stays aligned so water is properly distributed during the wash cycle. Replace this bracket if the middle spray arm wobbles, falls out of place, or if dishes on the upper rack are not getting clean due to poor water coverage.
Do-It-Yourself Stories from Customers like You
Upper basket wheel hubs had broken away Mark F. • Tigard , OR • February 25, 2022
Found a great extensive list of available parts for our dishwasher model on the website. Reference to videos made the repair steps very clear and easy to follow.
Read more
More
$6.95
- Compare At:
-
$8.20
- You Save:
-
$1.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Broken handle foot pedal and missing parts Donald M. • Lake Arrowhead , CA • April 05, 2015
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy!
Read more
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10323423
Adjustable manifold that connects the upper rack to the rear water feed tube. Replace if cracked, punctured, corroded, or missing the seal probe.
Do-It-Yourself Stories from Customers like You
Glasses were coming out with particles in them, manifold had corroded through in several areas. Ethan G. • Moorestown , NJ • April 19, 2020
Replace the entire assembly, manifold, spray arm with seal and water probe. Took 5 minutes. Problem solved!
Read more
More
$56.34
- Compare At:
-
$66.48
- You Save:
-
$10.14
Genuine Whirlpool part
By: Whirlpool
Part Number: 8193741
This upper rack adjuster sets and secures the dishwasher's top rack height so dishes clear the spray arms and load properly. When the adjuster wears or breaks, the rack can become uneven or stuck, leading to poor cleaning and loading issues.
- Provides the mechanism to raise/lower and lock the upper dishrack height
- Keeps the top rack level and secured to the rail during operation
- Common symptoms of failure: rack drops on one side, won't adjust, feels loose, or comes off the track
- Contribute to poor wash results when the rack can't be positioned correctly
What's included: 1 upper rack adjuster assembly Install notes:
- Disconnect power and water supply before servicing
- Remove upper rack end caps/stops and slide the rack out to access the adjuster
- Release or unfasten the old adjuster, transfer any reusable clips/wheels if applicable, and install the new adjuster
- Set both sides of the rack to the same height; reinstall rack and confirm smooth travel and secure locking
Do-It-Yourself Stories from Customers like You
There were two problems: one with upper wash arm the second the dish rack adjuster were worn out and needed replacing E. Joseph M. • Millbury , MA • February 05, 2016
Making use on online video on each repair item assisted greatly in getting things fixed quickly and efficiently.
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392899
Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.
Do-It-Yourself Stories from Customers like You
Lack of accurate control on 2 electric range burners Jeff D. • Neenah , WI • April 09, 2016
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job.
The fix only took about 15 minutes because I was prepared after watching the video.
Read more
More
$21.70
- Compare At:
-
$25.82
- You Save:
-
$4.12
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780925
Organizes and supports dishes during wash cycles. Replace if cracked, rusted, missing tines, or coating is flaking. Restores smooth loading function.
Do-It-Yourself Stories from Customers like You
Rusted tines on upper and lower racks Michelle L. • Sussex , WI • October 19, 2018
Kitchen Aid dishwasher is 11 years old, and the tines have been rusting and biting the dust one by over the last few years. Rather than further destroy my dishes by abrading them with rust particles, I decided to get new racks. They are terribly expensive, and I pondered getting a new dishwasher. It wouldn't be that much more expensive. But I love mine and how well it washes. It has a stainless interior, and all of the seals are in excellent shape. I didn't need any tools. (Although I'm a...
Read more
More
$328.52
- Compare At:
-
$394.22
- You Save:
-
$65.70
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10508676
Secures water inlet tubing to create a leak-resistant seal. Replace if cracked, stripped, or unable to hold the line securely. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Leaking Larry J. • Edison , NJ • March 07, 2021
I bought the part from AppliancePartsPros.com. Removed water inlet hose. Removed water outlet hose. Removed water inlet valve which was held on with one screw. Replaced the water inlet value. Reattached both hoses. It leaked a little bit, so I had to put plumbing tape and really make it tight. Then the leaked stopped.
Read more
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400071
10-32 thread machine screw secures panels, brackets, and internal components. Replace missing, stripped, or damaged fasteners to restore solid fit.
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: 285006
Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.
Do-It-Yourself Stories from Customers like You
My 1984 dishwasher that still works great was an eyesore & I didn't match my other appliances. Dorothy L. • Raleigh , NC • March 24, 2014
I purchased a can of black appliance spray paint, removed the panels on the dishwasher, sprayed them, and a few hours later put them back. They're beautiful and it looks like I have a brand new dishwasher! It now matches everything and looks great with the new granite counter tops I just installed. THANK YOU FOR THE GREAT IDEA!!! I'm a 76 year old female and my friends think I'm a genius!
Read more
More
$48.26
- Compare At:
-
$57.43
- You Save:
-
$9.17
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400892
Replacement 8-32-thread screw used to secure panels, brackets and small components in compatible household appliances. Restores missing or stripped fasteners so panels and parts stay firmly attached during normal use. What it does:
- Secures trim, panels, brackets and control housings to maintain proper assembly.
- Replaces missing or damaged screws that can cause rattling, loose panels or misaligned components.
- Fits locations that require an 8-32 threaded fastener; correct length and head style for your application.
- Helps restore stable, vibration-free operation when worn or stripped fasteners are replaced.
What's included: One screw. Install notes:
- Disconnect power and water before servicing; wear eye protection and gloves.
- Use the correct screwdriver or driver bit to avoid stripping the screw head.
- Do not overtighten—turn until snug and secure to avoid damaging threads or surrounding parts.
- If the original used a washer or nut, reuse or replace as needed and the screw length and head type match the original.
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76