Kuds03fsss2 Kitchenaid Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8193741
This upper rack adjuster sets and secures the dishwasher's top rack height so dishes clear the spray arms and load properly. When the adjuster wears or breaks, the rack can become uneven or stuck, leading to poor cleaning and loading issues.
- Provides the mechanism to raise/lower and lock the upper dishrack height
- Keeps the top rack level and secured to the rail during operation
- Common symptoms of failure: rack drops on one side, won't adjust, feels loose, or comes off the track
- Contribute to poor wash results when the rack can't be positioned correctly
What's included: 1 upper rack adjuster assembly Install notes:
- Disconnect power and water supply before servicing
- Remove upper rack end caps/stops and slide the rack out to access the adjuster
- Release or unfasten the old adjuster, transfer any reusable clips/wheels if applicable, and install the new adjuster
- Set both sides of the rack to the same height; reinstall rack and confirm smooth travel and secure locking
Do-It-Yourself Stories from Customers like You
There were two problems: one with upper wash arm the second the dish rack adjuster were worn out and needed replacing E. Joseph M. • Millbury , MA • February 05, 2016
Making use on online video on each repair item assisted greatly in getting things fixed quickly and efficiently.
Read more
More
$54.25
- Compare At:
-
$65.10
- You Save:
-
$10.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8564929
Color: gray. It measures about 1-1/2 inches in diameter.
Do-It-Yourself Stories from Customers like You
Missing rinse aid cap in dishwasher Thomas A. • Portland , PA • November 29, 2014
I bought a new home and with it came a Jenn-Air dishwasher. I noticed after using the appliance and filling the rinse aid container that where was no cap to hold/seal the rinse aid within the appliance or anywhere to be found. I was missing.! I was going to call Jenn-Air to inquire about this part, instead I searched online first and found it at Appliance Parts Pros.com. I ordered the part, it arrive to my home in less then 2 days and it fit! This is the easiest repair I've ever done and...
Read more
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20
Genuine Whirlpool part
By: Whirlpool
Part Number: 3385556
12 Ft in length
Do-It-Yourself Stories from Customers like You
Mice chewed the drain hose and power cord Noah C. • Eastsound , WA • February 16, 2015
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly.
Read more
More
$28.43
- Compare At:
-
$34.12
- You Save:
-
$5.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10247512
This upper dishrack track mounts to the dishwasher tub wall and provides a smooth glide path for the rack rollers. Replacing a damaged track restores easy in-and-out movement and helps keep the upper rack aligned and secure.
- Guides and supports the upper dishrack as it slides in and out
- Maintains rack alignment to prevent binding or derailing
- Typical failure signs: rack jams or falls off, rough/squeaky travel, visible cracks or breaks in the track
- Can keep the rack from fully sliding in, making the door harder to close
Install notes:
- Disconnect power and turn off the water supply before servicing
- Remove the upper rack by releasing the end caps/stops
- Unfasten the old track from the tub (screws/clips), then position and secure the new track
- Reinstall the rack and end caps; verify smooth rack travel before restoring power and water
Do-It-Yourself Stories from Customers like You
The rollers on the upper track of dishwasher broke tracks would not work correctly Ralph N. • Dover , NJ • May 26, 2015
Ordered tracks and adjusters via chat. Adjusters were not needed so I returned them. The repair was very easy. Had to slide out the dishwasher and remove four screws holding each track. Installed new tracks and put dishwasher back in place.
Read more
More
$117.56
- Compare At:
-
$139.90
- You Save:
-
$22.34
Genuine Whirlpool part
By: Whirlpool
Part Number: 4396840RC
Includes vinyl rack repair touch up paint and tine tip covers. Color: Grey
More
$57.39
- Compare At:
-
$68.87
- You Save:
-
$11.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8534008
Set screw secures dishwasher door handle to panel. Replace if missing, stripped, or corroded to restore tight handle mounting and prevent loosening.
Do-It-Yourself Stories from Customers like You
No problem with the appliance i replaced the stainless panel with a black panel to match the other appliances John M. • Branchburg , NJ • April 22, 2016
Extremely easy. All the parts were included, including the necessary tool to remove the old and secure the new. Awesome!!
Read more
More
$4.95
- Compare At:
-
$5.84
- You Save:
-
$0.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10418356
Third-level silverware basket mounts on dishwasher top rack to organize utensils and small items. Replace if cracked, broken, worn, or missing.
Do-It-Yourself Stories from Customers like You
Worn out pieces William H. • Salinas , CA • August 26, 2017
Replaced the worn out pieces
Read more
More
$53.21
- Compare At:
-
$63.32
- You Save:
-
$10.11
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392899
Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.
Do-It-Yourself Stories from Customers like You
Lack of accurate control on 2 electric range burners Jeff D. • Neenah , WI • April 09, 2016
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job.
The fix only took about 15 minutes because I was prepared after watching the video.
Read more
More
$18.23
- Compare At:
-
$21.88
- You Save:
-
$3.65
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8564899
This tub mount assembly secures the tub to the cabinet/frame, keeping it properly positioned so the appliance operates smoothly and quietly.
- Supports and stabilizes the tub during operation
- Helps reduce vibration, noise, and movement
- Replace if you notice excessive tub movement, rattling, or mounting damage
- Restores correct alignment after a broken or worn mount
What's included: One tub mount assembly Install notes:
- Disconnect power and water before servicing
- Access mounting area; support the tub to relieve stress on fasteners
- Transfer any reusable hardware and align the new mount precisely
- Tighten fasteners evenly; verify clearance and operation before restoring power
Do-It-Yourself Stories from Customers like You
Rack was falling inside the system. Joseph U. • Mentor , OH • June 29, 2020
Replaced the broken mount. Replaced both mounts at the same time to avoid the problem again in the near future. Parts fit fine!
Read more
More
$73.95
- Compare At:
-
$87.26
- You Save:
-
$13.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10073520
Foam pad that installs between dishwasher door panels to dampen sound and shield from heat. Replace if torn, compressed, or missing for quieter operation.
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268343
Secures the inner water tube assembly in your dishwasher. Replace if cracked, loose, or leaking. Rotates clockwise for removal. Verify fit with model.
More
$56.34
- Compare At:
-
$67.61
- You Save:
-
$11.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10334457
Fix a dishwasher motor that hums or won't start. This run capacitor provides the phase shift needed for smooth motor operation. DIY repair in 30-45 min.
Do-It-Yourself Stories from Customers like You
Dishwasher would start begin to fill with water then there would be 4 5 short "hums" or "buzzes" it would then shut off and drain what water had filled John S. • Granite Falls , MN • September 19, 2017
Figured it was either the capacitor and/or motor. Ordered both parts to be sure. tried changing the capacitor first; same problem. Replaced the motor (leaving the new capacitor in place). Unit now works fine. Overall an easy fix once you get the washer out and tip it on its side or top to get access to the motor area.
Read more
More
$87.43
- Compare At:
-
$104.92
- You Save:
-
$17.49
Genuine Whirlpool part
By: Whirlpool
Part Number: 4396838RC
White dishwasher rack repair kit includes 150 tine tips and vinyl paint to cover chipped, rusted, or worn rack tines. Extends rack life and prevents rust.
Do-It-Yourself Stories from Customers like You
Old rusty lower dishrack tines John N. • Alamogordo , NM • January 11, 2016
Replaced it with the modern replacement you provided. Now I have a repair kit, spare rollers, a foldable rack of tines and all the related parts put back for repair if necessary. A win win scenario. Thanks for all you do. :>)
Read more
More
$52.95
- Compare At:
-
$63.54
- You Save:
-
$10.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10247511
Guides the upper dishrack as it slides in and out. Replace if cracked, broken, or if rollers have fallen out, causing loose or unsteady rack movement.
Do-It-Yourself Stories from Customers like You
The rollers on the upper track of dishwasher broke tracks would not work correctly Ralph N. • Dover , NJ • May 26, 2015
Ordered tracks and adjusters via chat. Adjusters were not needed so I returned them. The repair was very easy. Had to slide out the dishwasher and remove four screws holding each track. Installed new tracks and put dishwasher back in place.
Read more
More
$129.68
- Compare At:
-
$155.62
- You Save:
-
$25.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8572611
Also order air vent gasket
Do-It-Yourself Stories from Customers like You
Excess steam release caused leaking down the front of the dishwasher John F. • Chester , NJ • August 02, 2015
Replaced Air Vent (+gasket). (Based on some googled descriptions of how.)
Took out several screws in the vicinity of the vent on upper left of door. These are specialized torx screw heads. Released inner panel enough for air vent to slide out. It is held to the panel by the louvered round cover. Twist the cover to the left to remove it and the Air Vent comes loose.
I tested the resistance of the old Air Vent and found it to be ~18 ohms. I had found on one site that it should be between 6 and...
Read more
More
$106.38
- Compare At:
-
$126.59
- You Save:
-
$20.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10508676
Secures water inlet tubing to create a leak-resistant seal. Replace if cracked, stripped, or unable to hold the line securely. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Leaking Larry J. • Edison , NJ • March 07, 2021
I bought the part from AppliancePartsPros.com. Removed water inlet hose. Removed water outlet hose. Removed water inlet valve which was held on with one screw. Replaced the water inlet value. Reattached both hoses. It leaked a little bit, so I had to put plumbing tape and really make it tight. Then the leaked stopped.
Read more
More