Kuws24lsbss01 Parts

The Dryer Light Bulb is an OEM part for Whirlpool dryers. This bulb is specifically designed to provide illumination inside the dryer drum, allowing for better visibility when loading and unloading laundry. It ensures a well-lit drying environment.

Causes of a bad dryer light bulb can include normal wear and tear, electrical issues, or accidental breakage.

Symptoms of a bad dryer light bulb may include:

• The bulb not turning on when the dryer door is open.
• Dim or flickering light inside the dryer drum.
• A burnt-out or broken bulb.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Gasket is an OEM part for Whirlpool refrigerators. This gasket is designed to create an airtight seal around the refrigerator or freezer door, preventing warm air from entering and cold air from escaping. It helps maintain the internal temperature, ensuring efficient operation and food preservation.

Causes of a bad gasket can include wear and tear over time, damage from frequent opening and closing of the door, or buildup of dirt and grime that compromises the seal.

Symptoms of a bad gasket include:

• The door not sealing properly
• Increased frost buildup in the freezer
• Higher energy bills due to the refrigerator working harder
• Condensation or moisture around the door seal

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This condenser fan motor drives the fan that moves air across the condenser coils and around the compressor. Replacing a weak or seized motor restores airflow for efficient heat removal and more stable temperatures. What it does:

• Spins the condenser fan to exhaust heat from the coils and compressor
• Supports proper cooling performance and helps prevent compressor overheating
• Common failure signs: rear fan not running or intermittent, loud grinding/squealing, hot cabinet back, long run times, warmer-than-normal temperatures
• Often resolves buzzing or cycling from the compressor area due to inadequate airflow

• 1 condenser fan motor

• Disconnect power before servicing; remove the rear access panel to reach the condenser area
• Note wire positions; transfer the existing fan blade and mounting to the new motor
• Ensure the blade spins freely and wiring is routed clear of the fan
• Clean condenser coils while access is open to improve performance

The Screw is an OEM part for Whirlpool microwaves. It is responsible for securing various parts of the microwave together. This screw ensures a tight and secure fit for parts and helps maintain the structural integrity of the microwave, preventing any loose or rattling parts.

A bad microwave screw can occur due to wear and tear, accidental damage, or misplacement during maintenance or repairs. If you notice symptoms such as loose or wobbly components, difficulty in opening or closing the microwave door, or abnormal noises while the microwave is in use, it may be time to replace this part.

Symptoms of a bad microwave screw include:

• Loose or wobbly components
• Difficulty in opening or closing the microwave door
• Abnormal noises during operation

Restore your Whirlpool microwave by replacing the faulty or missing microwave screw with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Factory replacement screw that secures appliance components and hardware. Use it to replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and help prevent loosening or damage from vibration.

• Fastens brackets, panels, or internal parts at the original mounting points
• Replaces worn or missing hardware to correct loose or misaligned components
• Helps reduce vibration-related noise and movement
• Matches the original thread and length specified for the application

• Disconnect power; shut off water or gas if applicable before servicing
• Compare to the original for thread and length match before installation
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• Reuse any original spacers/washers if present; replace if damaged

This thermostat is a temperature-sensitive electrical switch that helps regulate or protect your appliance by opening or closing the circuit at a set temperature. Replacing a faulty thermostat restores proper heating performance and consistent cycling. What it does:

• Monitors temperature at its mounting location and switches the circuit on or off to maintain safe operation
• Helps prevent overheating and protects components by interrupting power when limits are reached
• Common failure symptoms: no or weak heat, overheating/shutting off too soon, erratic temperature swings, frequent cycling or nuisance trips
• Can be checked with a multimeter for continuity when at room temperature or after controlled heating/cooling per service procedure

• 1 thermostat

• Disconnect power and allow all components to cool before servicing
• Note wire locations; move connectors one at a time to the new thermostat
• Mount the sensing surface flush and secure; reuse existing screws/bracket as applicable
• Do not overtighten terminals; verify continuity and correct operation after reassembly

This defrost thermostat senses evaporator temperature to control the defrost heater. Replacing a failed thermostat restores proper defrosting, prevents overheating during the defrost cycle, and helps maintain stable cooling performance.

• Monitors evaporator coil temperature and closes to power the defrost heater during defrost
• Opens the heater circuit as the coil warms to terminate defrost and prevent overheating
• Helps clear frost from the evaporator so air can circulate between freezer and refrigerator
• Failure may present as heavy frost/ice buildup, reduced cooling in the fresh food section, the evaporator fan hitting ice, or a defrost cycle that fails to start

• Disconnect power before servicing; defrost heavy ice as needed for access
• Located on/near the evaporator coil behind the freezer's rear panel, typically clipped to tubing
• Match original clip orientation and wire routing; ensure firm thermal contact with the coil/tube
• After installation, confirm operation with a continuity check at freezer temperature or run a manual defrost test per the service manual

Replacement on/off switch that restores basic power control to the appliance's electrical circuit. Swapping a failed switch can fix ovens, cooktops or other appliances that don't power on or have intermittent power, returning reliable control. What it does:

• Provides the user-accessible on/off function to complete or interrupt the appliance's electrical circuit
• Replaces worn or failed switch contacts that cause intermittent power or no-response conditions
• Can resolve symptoms such as an appliance that won't start, powers off unexpectedly, or fails to respond to the control knob or button
• Acts as the primary electrical contact for the controlled function

• Disconnect power at the breaker or unplug the appliance before starting
• Note or photograph wire locations and switch orientation before removing wires
• Use basic hand tools; handle terminals carefully to avoid bending or breaking
• After installing, restore power and test the function

This Leveler is the adjustable foot that supports and levels your appliance. Replacing a worn, cracked, or missing leg helps stop rocking and vibration, improving stability and ensuring smooth, quiet operation.

• Screws into the base to set height and keep the appliance level and secure
• Helps reduce rocking, vibration, and rattling that can cause excess noise
• Supports proper alignment and smooth door/closure operation when level
• Common symptoms: appliance wobbles, leg is stripped or broken, difficult to keep unit level

• Disconnect power and shut off gas/water if applicable before servicing
• With help, tip or lift the appliance slightly and protect the floor
• Thread the new leveler into the mounting boss and adjust height with a level
• Verify the unit is stable by gently rocking and recheck level after initial use

The CAPACITOR is an OEM part for Whirlpool refrigerators. As a crucial electrical component, the capacitor works to start and run the compressor motor safely. It prevents voltage fluctuations and helps extend the life of the compressor.

Causes of a bad capacitor can include failure over time due to heat cycling inside the refrigerator or freezer. Capacitors do not last forever with constant use.

Symptoms of a bad or failing capacitor include:

• Compressor not starting or running intermittently  
• Loud humming or buzzing sounds coming from the refrigerator  
• Temperature control issues with cooling performance
• Frost or ice buildup inside refrigerator or freezer

Replacing the capacitor with this OEM Whirlpool part restores the reliable startup and operation of the refrigerator's compressor. It keeps contents safely stored at the proper temperature.

This replacement capacitor is also compatible for use in Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore-brand refrigerators.

This black replacement control knob restores safe, easy control of your appliance's settings. It provides the original user interface feel so you can select cycles and temperatures with a firm grip. What it does

• Replaces a cracked, stripped, loose or missing control knob so controls turn smoothly
• Engages the control shaft to select cycles, temperatures, or power settings depending on the model
• Improves user safety and operation by restoring a secure, easy-to-grip surface
• Matches OEM fit and appearance for a factory-style replacement

• One black control knob

• Always disconnect power (unplug or shut off breaker) before servicing the appliance
• Pull the old knob straight off the control shaft; align and push the new knob onto the shaft until fully seated
• Do not force parts; inspect the control shaft and spline for damage before installing

This replacement dryer tube channels heated air from the dryer cabinet to the lint filter/blower and exhaust path, restoring proper airflow and helping the cycle dry clothes efficiently. Use it when the original tube is cracked, crushed, or blocked. What it does

• Directs dryer airflow from the drum/blower chamber to the lint trap and exhaust.
• Helps maintain proper venting to prevent overheating and inefficient drying.
• Reduces air leaks that can cause longer dry times or hot spots.
• Minimizes lint buildup in the cabinet by providing a smooth, routed path for debris to the lint filter.

• One dryer tube

• Disconnect power (and gas supply if applicable) before servicing; ensure the dryer is completely powered off.
• Remove front or rear access panel as required to reach and replace the tube; keep fasteners for reassembly.
• Inspect adjacent seals and clamps; replace any damaged gaskets or worn clamps for a secure fit.
• Use gloves to avoid sharp sheet-metal edges and run a short test cycle to ensure proper airflow and quiet operation.

This fan blade is the replacement blower blade that moves air through the appliance to help maintain proper cooling and circulation. Replacing a damaged blade restores airflow and helps the unit run more quietly and efficiently. What it does

• Spins on the fan motor to circulate air across coils and through the cabinet
• Worn, cracked, or missing blades can reduce airflow and cause warm spots
• A broken or unbalanced blade may make a loud noise or vibrate during operation
• Restoring a properly shaped blade helps the compressor and evaporator work as intended

• One replacement fan blade

• Disconnect power to the appliance before beginning any repair
• Remove access panels and mounting hardware as needed to reach the fan assembly
• Handle the blade carefully to avoid bending or cracking; ensure correct orientation on the motor shaft

This Defrost Timer cycles the unit between cooling and automatic defrost. Replace it if your appliance won't defrost or stays stuck in defrost, causing frost buildup, warm temperatures, or intermittent/no cooling.

• Controls automatic defrost intervals by switching from cooling to defrost and back
• Supplies power to the defrost circuit/heater during the defrost portion of the cycle
• Common failure symptoms: heavy frost on the evaporator/back wall, warm fresh-food section, runs constantly with no defrost, or no cooling if stuck in defrost
• Stop advancing through cycles or advance intermittently

• Disconnect power before servicing; electrical components can hold live voltage
• Location varies by model: typically in the control housing inside the refrigerator or behind a rear/service panel
• Photograph/label wire positions and transfer connectors one at a time to the new timer
• Mount securely, restore power, and verify normal cooling/defrost operation