Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Lat 7304Aae Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Washer Selector Knob
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001663

Replace your cracked, stripped, or missing selector knob. Attaches to the control shaft to choose wash cycles and options. Restores smooth operation.

Do-It-Yourself Stories from Customers like You Broken knobs   Billy P. • Moultrie , GA • June 07, 2015

Orde red replacement Read more

More
$54.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Spacer Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-2114830

This small spacer washer fits in the washer's drive assembly to set the correct clearance between mating parts. Proper spacing helps components rotate smoothly and quietly while minimizing metal-to-metal contact and premature wear.

  • Maintains the specified gap and alignment within the drive/brake or pulley stack
  • Helps reduce friction, rubbing, and vibration
  • A worn, distorted, or missing spacer can contribute to scraping or grinding noises and excess play
  • Often replaced during service of related drive components to restore correct stack order
What's included: 1 spacer washer. Install notes:
  • Disconnect power before servicing; shut off water if moving the appliance
  • Access and procedure vary by model—refer to your unit's service manual or parts diagram for the correct stack order
  • Support the appliance if working from below; remove belt/pulley or related parts as required
  • Reassemble in the exact order and orientation; verify free rotation before test-running

Do-It-Yourself Stories from Customers like You Washer would only spin.   Byron V. • Bellevue , MI • February 04, 2020

Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable. In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat. Long and short the replacement parts fit perfectly and the washer is running like new. Special thanks to the online support make my repair possible. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Fastening Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67006908

Replacement fastening screw for securing trim, panels, and brackets inside appliances. Use when original screw is missing, stripped, or damaged.

Do-It-Yourself Stories from Customers like You The ice bucket housing had disintegrated and the motor twisted off   Lloyd W. • Streamwood , IL • January 08, 2026

I pulled out the old housing and unplugged the motor. It pretty much came out in pieces. Remove the plastic from the motor, then had to take a pair of vice grips to hold the spindle in place to remove the auger. Remove what was still attached to the old Housing. Cleaned everything up and put the whole unit back together. The motor looked like it was somewhat cooked but still worked, so I ordered a new motor and auger to replace it. Because this fridge is 24 yrs old, Appliancepartspros... Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw, Single
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10346892

This factory screw secures appliance components such as panels, brackets, and trim. It replaces missing, stripped, or damaged hardware to restore a tight, rattle-free fit and proper alignment in the specified location for your model.

  • Fastens covers, panels, brackets, or trim as specified in the parts diagram
  • Restores secure fit when an original screw is missing or damaged
  • Helps reduce vibration, rattling, and looseness
  • Direct-fit hardware specified by the manufacturer for the original location
What's included: One screw. Install notes:
  • Disconnect power and shut off water/gas before servicing
  • Verify the screw's location in your model's parts diagram before installation
  • Start threads by hand to avoid cross-threading; tighten snugly without overtightening
  • Use the correct driver/bit and avoid overtightening into plastic to prevent stripping

Do-It-Yourself Stories from Customers like You I purchased 2 whirlpool xhp1550vw pedestals on clearance and one was missing the screws and pads   Evelyn D. • East Moriches , NY • March 03, 2015

By ordering the screws and pads from appliancepartspros.com which were delivered practically overnight! The service was beyond expectations! Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Hex Head Sheet Metal Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12990527

Hex head sheet metal screw secures appliance panels, brackets, and trim. Replace missing, stripped, or damaged screws to keep covers firmly attached.

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Agitator Spring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP215581

Fix a loose or slipping agitator that clicks or ratchets during wash cycles. This spring restores proper tension inside the agitator assembly.

Do-It-Yourself Stories from Customers like You Washer would only spin.   Byron V. • Bellevue , MI • February 04, 2020

Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable. In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat. Long and short the replacement parts fit perfectly and the washer is running like new. Special thanks to the online support make my repair possible. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Agitator With Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP208543

If your agitator spins freely or clothes aren't washing properly, this washer agitator restores wash motion. Includes mounting screw for secure installation.

More
$147.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Adjusting Nut (Eyebolt)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP211949

This adjusting nut threads onto an eyebolt to set and lock an adjustment point. It helps maintain proper tension or alignment in the mechanism so the appliance operates smoothly without the setting drifting over time. What it does:

  • Threads onto an eyebolt to fine-tune and secure an adjustment
  • Helps prevent vibration from loosening the setting
  • Replaces a stripped, rounded, or missing nut so adjustments hold
  • Visual cues for replacement include damaged threads or worn hex flats
What's included:
  • 1 adjusting nut
Install notes:
  • Disconnect power; turn off water or gas supply if applicable
  • Components attached to eyebolts may be under spring or mechanical tension—support and relieve tension before removal
  • Mark or measure the original setting to match during reassembly
  • Start by hand to avoid cross-threading; tighten securely without over-torquing

Do-It-Yourself Stories from Customers like You May tag washer bumper pads wore out   Larry W. • Hookstown , PA • November 18, 2014

I ordered parts from appliance parts pro at 3:30 on Friday and they were delivered at bout noon on Saturday the next day. Took the machine apart removed the old pads. With the directions in the packages put it back together and the wife ran 5 loads of clothes through it. Works great. Was awesome to get the parts so quick Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400014

Size: 8-32 x 1/2 inch.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Laundry Center Nut And Bolt Fastener
Genuine Whirlpool part
By: Whirlpool
Part Number: 205529

Replacement nut and bolt fastener for laundry center components. Secures panels, brackets, and assemblies. Order when hardware is missing or stripped.

Do-It-Yourself Stories from Customers like You No agitation.   Susan B. • Apple Valley , CA • August 09, 2020

This was some repair! My SG1000 stackable is over 30 years old and was purchased second hand. I've replaced many parts in the dryer section, but besides a water inlet, this was my first repair to the washer. All of a sudden it started making a terrible noise and was not agitating the clothes. The spin cycle worked fine. I first replaced the two belts on the bottom, but when I removed the old ones I realized they did not look terribly worn and weren't the cause. Many stories on here indicated... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Machine Screw 8-18 X 3/8
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10139210

Replace worn, stripped, or missing 8-18 x 3/8 machine screws that secure control panels, trim pieces, and brackets on your appliance. Restores tight fit.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: 8534058

Replacement mounting screw for securing panels, brackets, and components in dryers, refrigerators, and washers. Needed when screws are lost or stripped.

Do-It-Yourself Stories from Customers like You Knob was not turning / changing to correct heating selections   Michael H. • Coral Springs , FL • August 03, 2016

This was the perfect replacement part and once installed it fixed itself. Thank you! Read more

More
$9.10

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Dryer Panel Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002933

Replacement screw secures panels, brackets, and trim on washers and dryers. Replace missing, stripped, or damaged fasteners to restore proper fit.

More
$7.18

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001065

Size: 10-24 x .50 HXNI.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Retainer Clip (Panel/Trim Clip)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP213325

A small replacement retainer clip that secures panels, trim pieces or small hoses to prevent movement and rattling. Replaces worn or broken clips to restore proper fit and reduce noise from loose parts. What it does

  • Secures appliance trim, panels or lightweight components to the cabinet or chassis
  • Prevents rattling, vibration noise and misaligned panels caused by a missing or damaged clip
  • Holds wiring looms or small hoses in place on select appliance models
  • Restores OEM fit where original clip has broken, bent or fallen off
What's included One retainer clip Installation notes
  • Disconnect power (and water, if applicable) before servicing the appliance
  • Small part — a flat-head screwdriver or needle-nose pliers may be helpful for removal/installation
  • Handle sharp edges on panels and wear gloves and eye protection as needed

Do-It-Yourself Stories from Customers like You Lip seal was leaking oil which is at the part of the transmission housing shaft.   Gary B. • Hamilton , OH • April 07, 2017

I emailed appliancepartspros.com with what my problem was and they informed me what was wrong they gave me a part number to order, tools needed and a brief explanation how replace the seal. they also have online video's for different repairs. I watched the video for lip seal(part # 207843) replacement.I also had to remove the brake assembly in order to replace the seal so I watched that video also. I went online and got the part numbers for items I needed to make my repairs.Just follow the... Read more

More
$11.93

IN STOCK
Ships Today Guaranteed
Add to Cart
Cabinet Top Clip (Cabinet-Top Retainer), 1 Each
Genuine Whirlpool part
By: Whirlpool
Part Number: WP25-7220

This cabinet top clip is a small plastic retainer that secures the appliance's top/cabinet to the chassis, keeping the cabinet aligned and preventing movement or rattling. It restores a flush fit between the cabinet and body. What it does:

  • Secures the top/cabinet panel to the appliance frame so the cabinet stays in place
  • Prevents the cabinet from shifting, vibrating, or sitting unevenly
  • Helps stop gaps that can let dirt or moisture into cabinet seams
  • Common symptom: loose, rattling, or misaligned cabinet top or trim
What's included:
  • One cabinet top clip
Install notes:
  • Always disconnect power before servicing the appliance
  • Remove necessary trim or panels to access the cabinet clip; a screwdriver or trim tool may be needed
  • Replace broken or worn clips with matching parts only; inspect surrounding fasteners for damage

Do-It-Yourself Stories from Customers like You After moving the washing machine to our new house water dripped into tub with machine off   Stephen B. • Germanton , NC • January 11, 2017

I replaced the fill valve assembly with a new one. Had to look carefully at the parts diagrams to make sure I ordered the right one since the serial number break old vs. new didn't seem to match the number on my machine. On this particular machine you don't need to pull it out too far from the wall-leave the hoses connected to the valve, remove the screw holding the valve bracket, and pull into the washing machine where you can easily access the hose ends. A putty knife is needed to open... Read more

More
$4.19

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google