Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Blower Motor Assembly is an OEM replacement part for LG dishwashers. Located inside the wash cavity, it functions to distribute heated air throughout during the dry cycle. Rapid rotation of the blower motor blades works to eject moisture from dishes and ensure thorough drying.
Causes of a bad blower motor include failure of the motor itself, cracks in the blades that disrupt airflow, or bearing issues preventing proper rotation.
Symptoms include:
It is also compatible with some Kenmore dishwashers using LG components.
The solenoid that opened the air vent for drying was broken so it was open during the wash cycle allowing water to escape into the air duct. Found the part at SearsParts and AppliancePartsPro, and Sears was $15 more expensive. I ordered on Friday from AppliancePartsPro and selected standard shipping and the part arrive the next day (Saturday). Amazing service. AppliancePartsPro will be my first stop in the future. Read more
Replace your dishwasher's upper spray arm if cracked, broken, or clogged beyond cleaning. Installs in the top of the tub to spray water on the upper rack.
I replaced the upper nozzle guide, nozzle shaft and upper spray arm. I also replaced the pump gasket for good measure. Top rack dishes had not been cleaning properly. I first removed the filter assembly to inspect the main pump from above. It was clogged but after cleaning and reassembly I observed that while middle and bottom spray arms were changing position, the upper spray arm was not. I confirmed that water was flowing through the upper spray arm by placing some empty yogurt pots on a... Read more
Fix incomplete draining and pulsing sounds during drain cycles. This dishwasher check valve prevents backflow. Easy 30-minute DIY repair.
First determined drain discharge hose was clear. Turned of power to dishwasher. I did not find it necessary to remove the dishwasher. I simply removed the lower service panel at the floor and was able to easily remove the defective pump, unplug it, replace the small rubber check valve flapper before the pump inlet and reinstall the new pump assembly. The dishwasher surprisingly cleans and runs quietly like new again although I found no excuse for the pump failure as it is well designed. Never... Read more
Pivot shaft that supports and allows the upper spray arm to rotate in your dishwasher. Replace if broken, cracked, or worn to restore proper arm movement.
Dispenser not opening or leaking rinse aid down the door? This assembly restores proper detergent release. Most DIYers complete installation in 30-60 minutes.
I ordered a new vario motor and a soap dispenser. I turned off the water and the breaker, disconnected the water line and the power at the front base of the unit, disconnected the drain hose from the garbage dispenser, and pulled out the dishwasher and laid it on a blanket on its face. I unscrewed and removed the plainly visible vario motor on the bottom of the machine and removed the cam from the shaft. I then used a needle nose plier to carefully turn the D-shaft on the new motor to exactly... Read more
The Rack Holder is an OEM part for LG dishwashers. This component is designed to fit on the dishrack and functions as an attachment point for the roller wheels. It facilitates smooth movement of the dishrack in and out of the dishwasher.
Over time, the rack holder can wear out or become damaged due to regular use, heavy loads, or accidental impact. Corrosion from moisture exposure or broken clips can also affect the holder's performance.
Symptoms of a bad rack holder include:
Causes of a bad rack holder can include wear and tear from regular use, physical damage due to heavy or improperly loaded racks, and corrosion or rust from prolonged moisture exposure.
This OEM LG part is also compatible with Sears/Kenmore models.
With your parts replaced the affected parts. Read more
Replace bent, broken, or missing top mounting brackets to secure your dishwasher to the countertop. Prevents shifting and tipping during use. Set of 2.
I ordered new brackets to replace the broken ones. With the new brackets the instructions also showed me how I could also secure the dishwasher to the counter from each side. I replaced the brackets and secured the dishwasher to each side of the cabinets. The dishwasher is more secure now then ever. Read more
Fixes noisy wash cycles and dishes that won't come clean. This motor drives water through spray arms. DIY install takes 90 minutes with basic tools.
I had to disassemble the circulating pump housing to replace the motor. The cam motor shaft seal had failed. This led to water leaking to the motor which caused it to rust. After replacing, my dishwasher went back to being silent. The hardest part was figuring out how to access a couple of screws on the housing. Read more
Small sleeve bushing that supports pivoting or rotating joints in your dishwasher. Replace when worn, cracked, or causing excess friction between moving parts.
Thanks to LG NOT sending the parts THEY say are included with the dishwasher, I had to buy them in order to install the appliance. I sure hope the LG appliance performs better than their customer service. Very simple fix....bought the EXACT items needed from AppliancePartsPros.com and in just a matter of two days, had the parts needed. Amazing! Excellent experience. The fix was attaching the brackets to the cabinet and screwing it to the countertop. Also just popping the screw covers... Read more
Replace a cracked, broken, or clogged dishwasher spray arm nozzle assembly. Installs inside the tub to direct wash water through jets for coverage.
Joins dishwasher hoses to ports for leak-resistant connections. Replace this small connector if it's cracked, split, or loose to stop drips at the joint.
Did not have to remove the dishwasher, very tight quarters, it was a simple repair made a bit difficult because of where it is under the dishwasher, Read more
Loud droning noise during cycles? A cracked pump casing causes leaks and poor water flow. Moderate DIY repair requires dishwasher removal and reinstall.
I suspected the 'circulation pump' to be the culprit. I could not find a 'circulation pump' so I deduced via the picture schematics it must be the 'casing assembly, pump' I found on the website. I have heard there have been issues with the 'drain pump' so I also ordered the 'case assembly' on this site which is an odd name for the drain pump. Boxes came with just the part inside no instructions or other info. This was fine as I have been diy repairing things my entire life. I made sure... Read more
Replaces a damaged, broken, or missing row of prongs on your dishwasher rack. Restores secure spacing to hold plates and dishes upright during cycles.
Replaced them. Read more
Creates a watertight seal between dishwasher pump, sump, or inlet components. Replace when leaking occurs during wash cycles to restore proper performance.
This dishwasher sensor assembly contains the thermistor that monitors wash-water temperature and sends readings to the control. Replacing a faulty sensor restores accurate heating and cycle timing for consistent cleaning and to prevent temperature-related interruptions. What it does:
I replaced the float assembly. The float assembly was clogged with a soft sludgy material. It works perfectly now Read more
Fix a dishwasher door that won't stay shut or cycles that won't start. This door latch and lock assembly restores secure closure and cycle operation.
Replaced the door latch & door lock. Went really well and the dishwasher is working now. Read more