Ldss2612tdo Parts

This hinge assembly secures and pivots a refrigerator or freezer door to ensure proper alignment and smooth opening. Replaces a worn or damaged door hinge to restore stable door movement and a tight seal. What it does:

• Supports the appliance door and provides a pivot point for opening and closing.
• Restores correct door alignment to help maintain an even seal and reduce gaps.
• Reduces sagging, scraping, or uneven movement caused by a worn hinge.
• Works with the cabinet mounting point to keep the door stable during use.

• One hinge assembly

• Turn off power to the appliance and remove stored items from the door before starting.
• Use proper tools and follow OEM instructions or service manual for safe removal and installation.
• Handle glass shelves and door panels carefully; some installations require temporary support of the door.

Color: gray. Measures about 1 inch high by 4 inches deep.

The Rack is an OEM part for LG dishwashers. It is responsible for holding dishes, glassware, cutlery and other items securely in place during the wash cycle. The rack features an adjustable design that allows it to fit variably sized loads. 

Causes of a bad rack can include warping or bending of the wires over time due to heavy loads, and damage to the rack's ability to pivot or slide properly due to excess debris or buildup. 

Symptoms of a bad rack include:

• Dishes and silverware falling over or not being securely held in place during the wash cycle
• Difficulty fitting dishes evenly on the rack 
• Damage or bending of the rack wires
• Rust or corrosion building up on the rack

This OEM LG part is also compatible with select Sears/Kenmore models.

This mesh filter assembly screens debris from the system's flow path to protect internal components and maintain performance. Replace a torn, warped, or clogged filter to restore proper flow and help prevent cleaning and efficiency issues.

• Screens lint and debris before they reach critical components
• Helps maintain proper airflow/water flow for consistent performance
• Protects pumps/blowers and sensors from damage due to debris
• Common symptoms of a damaged or clogged filter include longer cycles, residue or lint remaining after a cycle, unusual odors, or visible damage to the mesh

• Disconnect power (and water supply, if applicable) before servicing
• Access the filter location and remove the old filter (unlock, twist, or slide out per design)
• Clean the cavity/seat area before installing the new filter
• Seat and lock the new filter fully; do not operate the appliance without the filter installed

This nozzle guide positions and supports the dishwasher spray nozzle on the rack, helping it align with the rear feed port for reliable water flow to the spray arm and consistent cleaning performance.

• Aligns the rack nozzle with the dishwasher's water feed port
• Stabilizes the nozzle to help ensure steady spray delivery
• If worn or broken, you may notice poor cleaning on the affected rack
• Can also cause intermittent spray or drips at the rear nozzle connection and difficulty engaging the rack nozzle

• Disconnect power and turn off the water supply before servicing
• Pull the rack forward, remove rack end caps/stops, and lift the rack out
• Release the old guide from the nozzle assembly; install the new guide and verify smooth movement and proper alignment with the feed port
• Reinstall the rack, restore power/water, and run a short test to check spray and for leaks

The Protector Cover is an OEM part for LG dishwashers. This cover serves as a protective barrier, shielding the inner hinge mechanism from food debris, water, and other potential contaminants.

As the dishwasher door continuously opens and closes over many cycles, the hinge area is vulnerable to collecting residue and experiencing damage. The durable plastic cover prevents such issues by encapsulating the hinge components. This helps ensure smooth operation without hindrances from built-up gunk or moisture penetration.

Causes relate to normal wear after extended use. Regular cleaning can prolong functionality, but replacement is necessary once the cover is damaged or no longer fully enclosing the hinges.

Symptoms of a bad protector cover include:

• Food particles or standing water present inside the hinge area
• Scratches or cracks allowing contaminants to enter the hinge mechanism
• Interference with door movement or squeaking/grinding noises

This OEM LG part is also compatible with some Kenmore models.

A direct-replacement interior tray that provides a stable surface inside the appliance to hold dishes and catch spills. Replaces a cracked, warped or missing tray to restore a secure, easy-to-clean cooking or storage surface. What it does:

• Provides a level surface to hold food, pans or containers inside the appliance
• Helps contain spills and crumbs for easier cleanup and maintenance
• Restores correct fit and support when the original tray is damaged or missing
• Eliminates wobbling or instability caused by a broken or warped tray

• Always disconnect power to the appliance before servicing
• Remove any food, cookware and the damaged tray before installing the replacement
• Set the tray into position, aligning any tabs or slots; most tray installs are tool-free
• Handle carefully if the tray is glass or brittle; discard the damaged tray safely

This packing seal provides a replacement sealing surface to help maintain an airtight, watertight closure and reduce leaks or drafts around the appliance opening. It restores the original sealing function for reliable performance. What it does

• Replaces worn or damaged packing to re-establish a secure seal
• Helps prevent water leaks and air infiltration at the door or panel seam
• Reduces moisture buildup and helps maintain proper internal temperatures
• Commonly used when a visible tear, deformation, or hardening is present

• One packing seal

• Inspect mating surfaces and clean thoroughly before installing the new packing
• Align the packing evenly and seat it fully into the channel or groove
• Use gentle, even pressure to avoid stretching or tearing the seal

This case assembly is a direct-fit replacement housing that secures and protects internal components, restoring stable mounting and proper alignment for the affected appliance area. Replaces a cracked, broken, or warped outer case. What it does:

• Protects internal components from impact and helps maintain proper component alignment
• Restores secure mounting for parts attached to the case
• Eliminates play or rattling caused by a damaged housing
• Helps prevent further damage from loose or misaligned parts

• Disconnect power to the appliance before beginning any work
• Remove exterior panels and attached components as needed to access the case
• Keep fasteners and mounting clips organized for reassembly; replace any damaged clips
• Follow OEM service instructions

This water guide directs water through the dispenser/ice path so water flows where it should, helping prevent leaks and misdirected dispensing. It's a small molded channel designed to route cold water inside the refrigerator. What it does:

• Guides and channels water from the supply toward the dispenser or ice-making area
• Helps prevent water from dripping into areas it shouldn't and causing puddles
• Supports consistent dispensing by keeping the water path aligned
• Commonly replaced when cracked, warped, or when water is leaking or pooling

• One water guide piece as shown

• Disconnect power and shut off the water supply before replacing
• Remove any interior shelves or panels as needed to access the guide
• Handle carefully to avoid damaging mounting tabs or adjacent seals
• Secure all clips; test dispenser and check for leaks after installation

This inlet hose connects the home's water supply to the appliance, allowing proper water fill for cycles. Replacing a worn or damaged inlet hose restores reliable water delivery and helps prevent leaks at the connection. What it does:

• Channels incoming water from the household supply into the appliance for normal fill cycles.
• Replaces hoses that are cracked, split, kinked, or leaking at the fittings.
• Helps stop intermittent or constant water leaks originating at the inlet connection.
• Restores proper water flow when low or no fill is caused by a compromised hose.

• Turn off the home's water supply and unplug the appliance before beginning any work.
• Inspect fittings and replace any damaged clamps or seals; hand-tighten then snug with a wrench—do not overtighten.
• Check for leaks after reconnecting water and restoring power; monitor during the first cycle.

The HARNESS, MULTI is an OEM component specifically designed for LG dishwashers. As an integrated wiring bundle, it facilitates synchronized communication between various dishwasher functions during cycles. Smooth signal transmission between heaters, pumps, controls, and other systems is necessary for optimized washing and sanitization.

Causes of a bad multi-function harness can include physical damage over time from rubbing or chafing insulation. Prolonged exposure to moisture, detergents, and rinse agents may also degrade individual wire coatings. 

Symptoms of a bad multi-function harness include:

• Failure of individual wash components to operate as designed
• Repeated error codes and incomplete or ineffective cycles  
• Strange noises or behaviors as systems experience disruption  
• Inability to fill or drain efficiently 

Replace yours today with this genuine LG wiring solution. Coordinated multi-component operation restores thorough cleaning performance. Compatible with Sears/Kenmore dishwashers as well.

This replacement case is the outer housing that protects and supports internal components, restoring the appliance's structural integrity and appearance. It helps keep parts aligned and shields wiring from damage. What it does:

• Replaces a cracked, warped or broken outer housing that can expose internal components
• Restores a secure mounting surface so panels and covers fit correctly
• Reduces vibration or rattling caused by a loose or damaged case
• Helps prevent dust and debris from contacting internal parts

• One replacement case

• Disconnect power to the appliance before beginning any work
• Handle part carefully; edges may be sharp and fasteners may be small
• Basic hand tools are typically required; keep removed fasteners for reassembly
• Verify orientation and fit before tightening all fasteners; test appliance function after reassembly