Your privacy choices: We and our partners use cookies for analytics and ads. Decline all turns them off.
Privacy Policy · Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Seals the joint between sump and tub to prevent leaks. Replace if worn, cracked, or flattened to stop water escaping. Confirm fit with your model number.
I ordered a tub seal to fix a gasket that let go in our LG LDS4821BB. Once I tore it apart to get the gasket out (little trouble) I also found what has made this DW stink for the last year. I needed to also replace the filter unit in the bottom of the tub and clean the heater area. I ordered the filter the same day I got the gasket. Both arrived WITHIN 48hrs of my order. Wow!! What more can you ask for? Great prices too. Both parts were replaced by removing a total of 12 screws and easy... Read more
Mounts over the dishwasher's drying fan vent opening to shield the blower and direct airflow into the tub. Replace if cracked, damaged, or missing.
I looked up my unit and reviewed the schematic drawing online at Appliance Parts Pro. Once receiving the parts, I Pulled out the dishwasher and removed side panels - didn't even have to disconnect anything. Removed broken parts and replaced them with the new - took about 10-15 minutes start to finish. Easy cheesy! Owning LG appliances I'm thankful to have found a resource like Appliance Parts Pro! I plan to use them for all my other LG repairs because they make it so easy to find parts. Read more
Fix dishwasher leaks from the bottom or poor spray action with a new sump and motor assembly. Includes circulation motor, drain pump, and gasket.
Ordered the part paid the extra 6-7 bucks to get it in 2 days. Once I received it it came in a box with bubble wrap around it not oem wrap. It took about 20 minutes to install and I've run it once so far no issues. Read more
Connects internal water lines in your dishwasher. Replace if cracked, worn, or leaking to restore a secure seal and prevent water damage under the unit.
We have a two year old LG dishwasher that started leaking After removing it from under the counter and laying it on its back I discovered that a mouse has chewed a hole in one of the hoses I took s pic of it sent it to APP tech dept They identified the part for me and I had it in two days Works like new again Great customer service I highly recommend them PC from Ct Read more
This small clip attaches to the dishwasher rack and holds the tine rows in position. It allows you to fold or reposition tines to accommodate different dish sizes and shapes. Replace this clip if tine rows are loose, fall flat during wash cycles, or no longer stay in their adjusted positions.
I bought a new controller first and installed it. The exact replacement controller was no longer available and I had to modify two AC connectors that changed from 3 pins with two wires to two pins with two wires. This was not expected but I made it work just fine by getting the three pin connectors on the cable to fit the two pin by breaking out the center web in the board two pin and then shaving off the raised key plastic on the wires. Then on power up, I found that the wash motor did not... Read more
The Pump Motor Assembly is an OEM component specifically designed for LG dishwashers. It houses both the wash and drain pump motors integrated within a singular assembly.
These motors work together to efficiently circulate water through spray arms during wash cycles for optimized cleaning performance. They also help drain dirty water at the end of each cycle, ensuring dishes are thoroughly rinsed.
Symptoms of a bad pump motor assembly include:
Causes can include normal wear over time, failures in motor electronic components, or damage from foreign debris.
Replacing the pump motor assembly with this genuine OEM LG part restores optimized wash and rinse functions. It is also compatible with Sears/Kenmore dishwashers.
The drain pump motor was bad. Pretty easy fix. Good engineering / design on these parts. Read more
This is a safety switch assembly that helps ensure the dishwasher operates only under safe conditions, such as when the door is properly latched or water pressure is adequate. It sends a signal to the control board to allow or interrupt the wash cycle. Replace this switch if the dishwasher will not start, stops mid-cycle unexpectedly, or fails to fill with water properly.
Replaced safety switch assembly to fix dishwasher leak. Read more
This dishwasher tine row is a replaceable rack component that holds dishes in place during the wash cycle. It features plastic prongs that secure plates, bowls, and cookware to prevent them from moving around or flipping over. Replace this part when tines are broken, cracked, or missing, causing dishes to fall through or not get properly cleaned.
Creates a watertight seal to prevent leaks in your dishwasher. Replace when worn or cracked to stop water damage. Confirm fit with your model number.
Dishwasher won't start or displays blinking lights? The main control board manages all functions and sensor readings. Moderate DIY repair difficulty.
PCB was bad - smelled like burning electricity. Had to make new wires spade connectors as the other ones were burnt up. Didn't want to buy a whole wire harness just for two connectors. Appliance Parts Pros helped again with the exact part, very fast! Love this company! Used it many times! Read more
Fix a dishwasher that won't start, stops mid-cycle, or shows error codes with this main control board. Replaces failed PCB assembly. Moderate difficulty.
This is a water inlet guide assembly that directs incoming water into the dishwasher tub during the fill cycle. It channels water from the inlet valve to the proper location inside the wash chamber for effective cleaning. Replace this part if you notice water leaking around the inlet area, poor fill performance, or visible cracks and damage to the guide.
I replaced both items. And it was easier than I thought. Read more
Replacement dishwasher holder secures internal components in proper position. Needed when original is cracked, broken, or missing causing rattling.
Small mounting bracket that secures internal dishwasher components in place. Replace if cracked, broken, or missing to stop rattling and maintain alignment.
Phillips head screwdriver was all I needed. Saw a few videos on youtube. Read more
This is a slide rail and roller assembly that mounts on the right side of the dishwasher tub to support and guide the cutlery or dishrack as it slides in and out. The rollers allow the rack to move smoothly along the track. Replace this assembly if the rack is difficult to slide, feels wobbly, or the rollers are cracked, worn, or no longer turning freely.
Stopper roller guides and cushions dishwasher panels for smooth, quiet operation. Replace if door binds, rubs, or moves unevenly. Confirm fit with your model.
Opt-Out Request Honored
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.