Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
The door to our freezer was sagging due to the a nylon bearing wearing out on the bottom hinge. The sagging door prevented a good seal. I replaced the bottom bearing, and the door seals perfectly. Read more
The Run Capacitor is an OEM part for Frigidaire refrigerators. It helps maintain a consistent electrical current to the compressor, ensuring efficient operation and optimal cooling performance.
Causes of a bad run capacitor can include electrical surges, prolonged use leading to wear and tear, or physical damage. A failing capacitor can lead to the compressor running inefficiently or not at all, affecting the refrigerator's ability to maintain the desired temperature.
Symptoms of a bad run capacitor include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
I replaced defrost timer (which I am glad I did because of wear on the points) but that did not cure the problem. So after checking other components, I found that the temperature control was the culprit. No problem, I will simply order part # 2162521100. Well Frigidaire decided to obsolete that part and "Has not provided an approved substitute". So, I have to scrap this freezer and pay $800 to $900 for a new one? Not! So I kept looking at subsequent freezer temperature controls and found part #... Read more
Replace the lock assembly: Open the lid and remove four philips screws from underneath the gasket. Carefully and patiently remove all of the gasket clips, first from the left and right sides then remove all but two from the top so when the final one comes out the panel and gasket can come towards you and then set gently in the top of the freezer. Remove the wires from the bulb in the center so they won't be in the way. Remove the large fiberglass rectangle and set it on top of the panel. Use a... Read more
Replaced thermostat Read more
Simply took out old that was falling apart and pushed in the new one. Because it was packaged bent in two places, it didn't fit as snugly in one section as it should, the bend wouldn't totally straighten, but hoping it's OK. Read more
Pulled bottom kick panel off, removed the one screw that held the light bracket on, unplugged the light connection, had to file a small burr off the bracket and pushed the light into the slot, reconnected the push on connector, replaced the screw for the bracket, replaced the kick panel, and marveled at my accomplishment. Less than twenty minutes, the part was the correct one, no problem. Read more
The door handle on our Frigidaire refrigerator had snapped into two pieces. The replacement parts were received within two days from AppliancePartsPros.com. My wife was able to quickly switch out the parts within 5 minutes. The unit looks as good as new. Read more