Lfx28979st Parts

This ice dispenser door assembly opens to release ice and seals the chute when not in use. Replacing a worn flap restores a tight seal to reduce frost buildup and air leaks at the dispenser.

• Seals the ice chute to keep warm air out and cold air in
• Opens during dispensing to allow cubed or crushed ice to pass
• Helps prevent frost/ice accumulation in the chute and around the dispenser
• Common signs of failure: flap won't open/close, visible gap or draft at the chute, frost forming in the dispenser area

• Always disconnect power before servicing the dispenser
• Remove dispenser trim/control panel as directed; disconnect wiring as needed
• Remove mounting screws/clips, swap the assembly in the same orientation, and reuse existing hardware if applicable
• Restore power and test for smooth operation and a proper seal

This rail guide assembly supports and guides a sliding drawer/rack along its track so it opens and closes smoothly. Replacing a worn or broken guide restores proper alignment and motion, helping prevent sticking, jamming, or uneven travel.

• Supports and stabilizes the drawer/rack on its slide rail
• Helps ensure smooth, straight opening and closing
• Can address issues like binding, noise, or misalignment
• Replaces cracked, warped, or broken guide components

• Disconnect power and, if applicable, shut off water before servicing
• Remove the drawer/rack and retain any reusable hardware
• Install the new guide in the same orientation as the original
• Test movement for smooth travel before fully reassembling

This rail guide assembly restores smooth, reliable drawer movement by guiding and supporting the slide rail. Replaces a worn or broken guide so freezer/refrigerator drawers open and close without sticking or falling off track. What it does

• Guides the drawer slide rail and keeps the drawer aligned during operation
• Helps stop drawers from binding, sticking, or coming off the rail
• Reduces scraping, grinding, or noisy sliding caused by damaged guides
• Restores proper drawer support so contents remain stable while opening and closing

• Disconnect power before working inside the appliance and remove food, drawers and shelves that block access.
• Remove the old guide and install the new guide using the original mounting screws; match the correct side/orientation before fastening.
• Use common hand tools; avoid forcing parts—if the rail is bent or damaged, replace the rail as well.

This tray assembly replaces the right-side Fresh Room tray in your refrigerator. It restores sturdy, level storage in the pantry/deli area so items stay organized and the drawer fits and slides as intended. What it does:

• Provides the support surface for the Fresh Room/pantry section
• Seats and aligns the matching drawer/cover for smooth operation
• Replaces cracked, warped, or missing tray to restore proper fit
• Common symptoms: broken tabs, tray won't stay in place, drawer misalignment, unstable or tipping items

• 1 right-side Fresh Room tray assembly

• Empty the compartment; lift and tilt out the damaged tray from its supports
• Inspect side guides/rails; ensure mounting points are intact before installing
• Align the new tray with the right-side guides and slide/press fully into place
• Handle carefully to avoid stressing plastic; wear gloves for protection

This refrigerator Drawer Tray Assembly forms the shelf/frame that supports a storage drawer. Replacing a cracked or broken tray restores smooth drawer movement, proper support for food items, and organization inside the compartment.

• Supports and guides the storage drawer within the compartment
• Provides a stable, level surface for everyday use
• Replace if the tray is cracked, warped, or has broken tabs
• Common symptoms: drawer binds, drops, misaligns, or won't slide/close smoothly

• Disconnect power before servicing
• Remove the drawer and any items/glass from the area to prevent damage
• Align tabs/rails, seat the tray evenly, and avoid forcing parts together
• Transfer any reusable hardware from the original assembly if required

This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:

• Provides a mounting and alignment point for internal TV components to keep assemblies stable
• Helps maintain proper spacing between parts to prevent rubbing, misalignment, or rattling noises
• Can restore correct fit where a damaged or worn guide causes loose panels or shifting components
• Useful when repairing or replacing adjacent parts that rely on the guide for proper positioning

• Guide assembly

• Disconnect power and remove the TV from its wall mount or stand before servicing
• Handle the panel and internal boards carefully to avoid damage; use non-marring tools
• Keep track of all screws and grounding hardware removed during disassembly for reassembly

This evaporator assembly circulates refrigerant and absorbs heat inside the freezer compartment to keep the refrigerator cool. Replacing a faulty evaporator restores proper cooling and helps prevent frost buildup and temperature issues. What it does:

• Contains the evaporator coil and housing that remove heat from the freezer air
• Enables the refrigeration cycle so the appliance reaches and holds set temperatures
• Affects frost control—worn or damaged units can lead to excessive ice buildup
• Commonly linked to symptoms like poor cooling, freezer frost, or frequent compressor runtime

• One evaporator assembly (coil and housing)

• Disconnect power to the appliance before beginning any service
• Remove interior panels and shelves to access the evaporator compartment
• Handle the assembly carefully; avoid bending fins or damaging connections

This Door Basket Assembly replaces a damaged or worn door shelf bin to restore secure storage on the appliance door and keep bottles, jars and small items contained during normal use. Fits the original mounting points for a direct replacement. What it does:

• Provides a molded shelf area that holds bottles, condiments and small containers on the door.
• Restores proper door storage if original basket is cracked, broken or bowed.
• Helps prevent items from shifting or falling when the door is opened or closed.
• Matches OEM shape and mounting locations for a straightforward swap.

• 1 door basket assembly

• Remove all items from the door and power off the appliance before beginning.
• Typically installs by aligning the basket with the door rails or mounting tabs and snapping or sliding into place.
• Inspect mounting tabs and surrounding trim for damage; replace any broken hardware before installing.
• Use gloves to avoid sharp edges and discard broken plastic parts safely.

This complete freezer door assembly replaces a damaged or worn freezer door to restore proper closure and cold retention. It fits the freezer compartment and includes the door shell and attached inner components for a like-for-like replacement. What it does:

• Replaces a cracked, dented, or warped freezer door to help prevent cold air loss
• Restores proper door alignment and sealing to reduce frost buildup and temperature issues
• Provides the original mounting points and inner components for easy fitment
• Helps the freezer maintain consistent performance when the old door can't close or seal properly

• Disconnect power to the appliance before starting any repair
• Remove food and shelves from the freezer area for access and safe handling
• Installation typically requires basic hand tools; support the door during removal/installation to avoid injury or damage
• If the door contains glass or trim, handle carefully.

This is a replacement mounting bolt used to secure appliance components and assemblies, restoring proper fit and reducing movement that can cause noise or misalignment. Use when a factory fastener is missing or damaged. What it does

• Fastens panels or internal components to maintain correct alignment and structural integrity.
• Prevents vibration-related noise and rubbing by holding parts securely in place.
• Restores secure connections after disassembly for service or repair.
• Helps eliminate intermittent movement that can lead to wear or leaks when a fastener is compromised.

• Use the correct bolt length and thread engagement for the application; do not force a mismatched fastener.
• Tighten to snug, manufacturer-specified torque when available; avoid overtightening to prevent stripping.
• Inspect surrounding parts (washers, nuts, threaded holes) and replace if worn or damaged.
• Disconnect power and follow all safety precautions before servicing the appliance.