Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice freezing in chute or water dripping from dispenser? This ice dispenser door assembly restores proper sealing. 15-minute DIY repair with video guide.
Replaced the ice dispenser door assembly Read more
Refrigerator won't start or compressor struggles to run? The run capacitor provides the power boost needed to start and maintain compressor operation.
Roller component for the ice dispenser door handle on bottom-mount refrigerators. Replaces broken, worn, or missing rollers. Ensures smooth handle operation.
Threaded bases for two roller screws were ~ 80% broken off. Used a short (just barely extends past the end of the roller) sheet metal screw to secure the roller in the upper sliding section of the handle (handle in place first). The head was thick enough to fill the gap between the roller and the cover. Filling that gap accurately is important. Need to keep the roller pushed into the recessed area in the door. (Do a test fit with the parts before trying to install them on the door). Turn the... Read more
Allows water to flow directly to your dispenser and ice maker without filtration. Install when choosing not to use a water filter. Confirm fit by model.
Replaced filter with plug. Read more
Refrigerator not cooling or running warm? A faulty condenser fan motor assembly prevents proper airflow across the condenser. Includes motor and blade.
Fix a refrigerator not cooling properly or displaying ER RF codes with this evaporator fan motor. Ensures even cooling throughout your fridge. DIY repair.
Replaced the Evap Fan, Refrig Control, and the Temperature Sensor. Read more
Spring that tensions the ice dispenser door for proper closing and airtight seal. Replace if door won't close or ice gets stuck. Verify fit with model.
I am so, so grateful to AppliancePartsPros.com for including the DIY videos with their parts schematics. "Simon" gave me the encouragement to tackle the repairs on my LG refrigerator myself. I simply listened to/watched the videos and replaced both the spring and the entire water/ice dispenser assembly. I will admit though, removing and replacing the dispenser assembly was a little challenging. I was very cautious not to break the plastic tabs. However, after completing the repairs I was... Read more
The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.
Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.
Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:
This OEM LG part is also compatible with some Kenmore models.
Ordered parts, removed top tray in freezer, popped the back inside freezer panel out removed and replaced fan, dampers and fan housing. Took about 15 minutes. Read more
Secures the dispenser lever in place on your refrigerator. Replace if retainer is cracked, broken, or missing to restore proper lever stability.
Followed your on-line video. Not too hard to fix. Read more
Ice dispenser door spring maintains tension for smooth opening and closing of the ice compartment door. Replace if door won't seal or spring shows wear.
Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.
The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the... Read more
Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.
Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.
The Dispenser Gasket is an OEM part for LG refrigerators. It is a seal that helps create an airtight barrier around the dispenser area, preventing air leaks and maintaining the desired temperature and humidity levels inside the refrigerator.
Causes of a bad dispenser gasket can include wear and tear over time, exposure to extreme temperatures or UV light, or physical damage from mishandling or improper installation.
Symptoms of a faulty dispenser gasket include:
This OEM LG part is also compatible with some Sears/Kenmore refrigerator models
Replaced Dispenser Air duct gaskets Read more
The Fan Assembly is an OEM part for LG refrigerators. It is responsible for circulating air within the refrigerator and freezer compartments, ensuring consistent cooling and optimal temperature distribution. The fan assembly helps maintain the freshness of your food by evenly distributing cold air.
Common causes of a bad fan assembly include electrical issues, worn-out bearings, or obstructions that prevent the fan from spinning properly.
Symptoms of a bad fan assembly include:
This OEM LG part is also compatible with Sears/Kenmore models.
Removed 2 screws from mullion strip heater and slid it up off the tabs at top and bottom. Unhooked the plug and removed it. Verified proper mullion heater and then plugged wiring connection back together, positioned slide clips back in line and slid mullion down onto the clips. Tucked the wiring back into opening positioned cover back in place and reiinstalled the 2 screws. It took about 10 minutes for the entire job. the 2nd problem was a noisy evaporator motor and is a more intense repair... Read more
Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.