Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement freezer door handle for bottom-mount refrigerators. Installs on freezer compartment door. Replace if broken, cracked, bent, or missing.
Ordered new freezer arm Read more
Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.
Secures the dispenser lever in place on your refrigerator. Replace if retainer is cracked, broken, or missing to restore proper lever stability.
Followed your on-line video. Not too hard to fix. Read more
Ice dispenser door spring maintains tension for smooth opening and closing of the ice compartment door. Replace if door won't seal or spring shows wear.
I am so, so grateful to AppliancePartsPros.com for including the DIY videos with their parts schematics. "Simon" gave me the encouragement to tackle the repairs on my LG refrigerator myself. I simply listened to/watched the videos and replaced both the spring and the entire water/ice dispenser assembly. I will admit though, removing and replacing the dispenser assembly was a little challenging. I was very cautious not to break the plastic tabs. However, after completing the repairs I was... Read more
Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.
The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the... Read more
Fix refrigerator error codes, temperature issues, or fans not running. This control board manages defrost cycles and temperature settings in your unit.
Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.
Threaded bases for two roller screws were ~ 80% broken off. Used a short (just barely extends past the end of the roller) sheet metal screw to secure the roller in the upper sliding section of the handle (handle in place first). The head was thick enough to fill the gap between the roller and the cover. Filling that gap accurately is important. Need to keep the roller pushed into the recessed area in the door. (Do a test fit with the parts before trying to install them on the door). Turn the... Read more
This is a rubber seal gasket that fits around the ice or water dispenser door on the refrigerator. It creates an airtight seal to prevent cold air from escaping and warm air from entering the ice bank area. Replace this gasket if you notice frost buildup around the dispenser, ice clumping in the dispenser chute, or if the seal appears cracked, torn, or no longer sits flush.
Replaced Dispenser Air duct gaskets Read more
Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.
I found the condensing fan motor would not turn with power applied. I also found a drain tube cracked and breaking. I had to use a snub nose screwdriver to remove and replace condensing fan motor. The power wires were simply a snap on. The new drain tube just slipped on. Thanks for the speedy delivery! Stephanie Hobbs Read more
The ice maker and auger motor assembly powers the mechanisms that produce ice and push it from the storage bin through the dispenser chute. Without a functioning motor, the ice maker will stop producing ice and the auger will no longer move ice to the dispenser. Replace this assembly if your ice maker has stopped making ice, the dispenser is not dispensing ice, or you hear a humming or grinding noise from the ice bin area.
The new icemaker was a perfect fix. Read more
The Fan Assembly is an OEM part for LG refrigerators. It is responsible for circulating air within the refrigerator and freezer compartments, ensuring consistent cooling and optimal temperature distribution. The fan assembly helps maintain the freshness of your food by evenly distributing cold air.
Common causes of a bad fan assembly include electrical issues, worn-out bearings, or obstructions that prevent the fan from spinning properly.
Symptoms of a bad fan assembly include:
This OEM LG part is also compatible with Sears/Kenmore models.
Removed 2 screws from mullion strip heater and slid it up off the tabs at top and bottom. Unhooked the plug and removed it. Verified proper mullion heater and then plugged wiring connection back together, positioned slide clips back in line and slid mullion down onto the clips. Tucked the wiring back into opening positioned cover back in place and reiinstalled the 2 screws. It took about 10 minutes for the entire job. the 2nd problem was a noisy evaporator motor and is a more intense repair... Read more
Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.
Replacement glass shelf for refrigerator storage. Installs inside fridge compartment to support food items. Needed when original is cracked or broken.
I ordered the replacement shelf. Read more
Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.
Ice stuck in dispenser door or won't dispense? This ice dispenser door lever controls ice release. DIY repair in under 15 minutes with video guide.
I use appliance parts pros for all my diy projects. I ordered the parts and they arrived within 3 days.I watched to video on how to replace the ice dispenser assembly parts 3 times before starting the repairs. I assembled the tools, putty knife and screwdriver. Unplugged the refrigerator and followed the direction from the repair video step by step. I replaced all the old parts with all the new parts. It took me less than 15 minutes to complete the repairs. I closed up the panel and plugged the... Read more
Replace a cracked, broken, or missing refrigerator door basket. This bin mounts to the inner door to organize and hold bottles, condiments, and small items.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.