Lmv2023 Parts

This replacement door handle restores a solid, comfortable grip so you can open and close the door normally again. Ideal when the original handle is cracked, loose, or broken, it refreshes the look and supports safe, everyday use. What it does:

• Provides the handhold used to open and close the door
• Secures to the door using model-specific mounting screws
• Typical symptoms: cracked or broken handle, looseness/wobble, missing handle, or difficulty opening the door
• Common causes: wear, impact, or over-tightening of fasteners

• 1 door handle

• Disconnect power to the appliance before servicing
• Support and protect the door and any glass/finish while working
• Access handle fasteners per your model's service information; transfer and reuse original screws/trim
• Hand-tighten mounting screws; do not over-tighten

Metal mounting plate that secures the microwave chassis to the wall or cabinet. Replace if bracket is bent, cracked, or missing during installation.

Holds the light bulb and maintains electrical connection in your microwave. Replace when socket is cracked, heat-damaged, or causes flickering lights.

Turntable not rotating or making noise? This coupler shaft connects the motor to the glass tray for even heating. Takes seconds to install—no tools needed.

Fix F4 error codes or sensor cook failures with this microwave humidity sensor. Restores automatic cooking cycles. Moderate DIY difficulty.

Plastic cover that encloses and protects the stirrer fan assembly. Replace if cracked, melted, warped, or missing to keep debris out of the fan area.

White door handle for microwave oven. Provides a secure grip for opening and closing the microwave door. Replace if cracked, broken, or loose.

Fastener nut secures internal components in your microwave. Replace if stripped, rusted, or missing to restore tight hold and proper panel alignment.

This part is the base for the small simmer burner on gas cooktops. It supports the burner cap and channels gas to the flame ports to promote consistent ignition and an even, stable flame. What it does

• Serves as the burner base for the auxiliary/simmer position
• Aligns and supports the burner cap for even flame distribution
• Routes gas from the orifice to the burner ports
• Common symptoms include weak or uneven flames, difficulty lighting with a known-good spark, or a cap that won't sit flat

• One auxiliary burner holder

• Disconnect power and shut off the gas supply before servicing
• Remove the grate and burner cap; take out mounting screws and lift off the old holder
• Transfer/reuse the orifice, igniter electrode, gasket, and hardware as applicable; seat the new holder evenly and tighten fasteners without over-torquing
• Restore gas and power; verify proper ignition and flame

This thermostat is a temperature-sensitive safety switch used in LG microwaves. It monitors internal temperature and opens the circuit when overheating is detected to help protect components from heat damage.

• Monitors temperature at its mounting location inside the microwave
• Opens on overtemperature to interrupt power for safety
• Depending on model/location, a failed or open thermostat can cause no heat, the unit shutting off mid-cycle, or no power until it cools
• Helps prevent damage to the magnetron, cavity, and wiring due to overheating

• Unplug the microwave before service; the high-voltage capacitor can retain a dangerous charge
• Note wire positions, remove mounting screws, and install the new thermostat flat against the surface for proper heat sensing
• Reassemble and test; ensure vents and filters are clear to maintain proper airflow and prevent future overheating

Microwave suddenly loses all power? This thermal safety thermostat monitors temperature and cuts power when overheating occurs. DIY-friendly repair.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Weak or no ventilation? This microwave fan motor restores proper airflow to prevent overheating and eliminate cooking odors. Direct repair.

Molded resin cover restores a clean look while protecting internal components. Replace your cracked, broken, or missing cover to keep parts shielded.

This replacement door glass restores a clear viewing window and the protective barrier on your microwave door. Replace it when the original panel is cracked, shattered, or heavily scratched to keep the door secure and safe to use.

• Provides the see-through window and protective barrier within the microwave door
• Helps maintain proper door rigidity and alignment when intact
• Replace if the glass is cracked, chipped, shattered, loose, or badly scratched
• Reduced visibility, rattling, or visible damage are common symptoms of failure

• Unplug the microwave before servicing; microwaves can retain high voltage—use caution and do not open the cabinet
• Support the door; removal from the hinges may be required per your model's diagram
• Handle glass with cut-resistant gloves; edges can be sharp
• Transfer any reusable trim/clips as directed and verify the door latches and closes properly after installation