Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Decided to order the kit with both rollers even thou the right one looked OK.Also ordered the pulley for the idler. Watched the video for the pulley installation,super helpful on a couple of the steps!! Everything went great. A 14 year old dryer still has life! Parts ordering and delivery was also great!!! Thank you. Read more
I figured it had to be the flume; changed the flume and hose, mounting screws Read more
Kit includes door switch and mounting clip. For the switch only order WP53-0148.
I replaced the door switch Read more
Made for most Admiral, Crosley, Norge, and Magic Chef dryers. Kit includes 2 drum support rollers, 2 support shafts, 4 screws, 2 spacers, 2 washers, 2 retaining rings and instruction sheet.
When I pulled out the dryer from the wall, I could see dust/lint had accumulated everywhere and the vent system was compromised. I vacuumed up the dust/lint accumulation outside and then inside the vent system. I then opened the lower cabinet to clean and check its condition. I removed the water steamer bottle and its sub-assembly and then the drum. After cleaning and inspecting components — both visually and with a multi-meter I determined the problem was the appliance doing what it was... Read more
This is the third time I have had to make this repair. This time it was on a different dryer with a cabinet on top. But tried getting a deal on the package of parts from another retailer, they were all the wrong parts so was out shipping costs. Have always received the correct parts from appliance parts pros. The movie tutorials were a big help as well. Schematic diagrams help pin down the correct parts. Shipping costs are reasonable and receive in no more than three days generally. I will... Read more
This is the door switch only. For the door switch including the mounting clip order LA-1005.
I first unplugged the dryer, lifted the top of the dryer, then removed two screws that hold the front panel to the side panels. I removed the cable clip that holds the wires for the switch to the front panel, and removed the wires from the switch. I then removed the switch from the clip that holds the switch in place. My original switch had only one connection at each end, but the replacement had two at one end and one at the other. The terminals at the one end were labeled NC and NO. I... Read more