Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement rail guide for refrigerator drawers and bins. Restores smooth sliding when original is cracked, broken, or worn. Mounts to cabinet interior.
Searched and ordered parts from the web. Only confusing part is that the left and the right rails have separate part number. I looked at the picture on the web site to see one was on the left and another on the right before ordering. In my case the right one was broken and the left one had crack, so I ordered both parts. Read more
Ice dispenser door won't close or stays open causing frost buildup? This small torsion spring restores tension to snap the chute door closed properly.
Fix FF error codes and warm spots with this evaporator fan motor. Stops grinding noises and restores airflow. DIY-friendly, 30-minute repair.
Went online and searched for LG refrigerator error codes and discovered that code was freezedr fan failure. Ordered and replaced freezer fan motor assembly. Took longer to remove food from you freezer than to replace fan motor. Freezer working great now. Read more
Leveling leg assembly stabilizes and levels your refrigerator cabinet. Replace worn, stripped, cracked, or broken legs to eliminate rocking and vibration.
I screwed out the broken leveling leg and screwed in and reset the new one.Iit is working fine. I also thought I needed to replace the water line to the Ice maker, but discovered I just needed to reattach it. I do, however, need to fix the water dispenser as it will not shut off. How do I do that? Read more
Fix a refrigerator that won't start or cool. This compressor start relay restores power to the compressor. DIY repair with a multimeter in under an hour.
For an emergency fix I installed a 3 in1 kit disabling the original start cap and wiring in the original run cap to the run winding. Ordered the proper PTC and overload from Appliance Parts Pros and installed them 2 weeks later. The original start and run capacitor were good, rewired back to design specs. The original PTC had pins 1,2 and 3, the replacement had 2,3 and 4. Only wiring change was to install the red wire from pin 1 on the original PTC to pin 4 on the new PTC. Read more
Mounting bracket that supports the dispenser paddle behind your refrigerator's front panel. Replace if cracked, broken, or lever feels loose or misaligned.
I ordered the parts and watched your video(which was great) and the fix went perfect.Thanks! Read more
Replacement vegetable crisper tray for your refrigerator. Provides a stable bottom surface to keep produce organized. Replace if cracked, warped, or missing.
Replaced it with a new drawer from AppliancePartsPros.com, The replacement drawer fit perfectly. Read more
Replacement crisper drawer that installs in your refrigerator to store produce. Needed when your original drawer is cracked, broken, or missing a handle.
Received the correct parts and was able to install them Read more
Ice door funnel for side-by-side refrigerators. Guides ice from dispenser to door opening. Replace if cracked, broken, or tabs damaged.
Replaced ice shot door. Because the original ice funnel was glued in by the manufacturer, it could not be removed without breaking, resulted in replacement of the ice funnel and dispenser assembly. Unfortunately the dispenser was damaged when I received it. This wouldn’t have happened if packaged from the supplier in a box instead of a bubble rap envelope. Fortunately i was able to repair (glued together). The drip tray was not the correct part hopefully I can return and exchange. However I... Read more
Fix error code CF, warm spots, or inconsistent cooling with this evaporator fan motor. DIYers complete this repair in about 30 minutes with basic tools.
Removed the old fan housing. Removed the fan from its housing and took the fan blade off. I then smelled the fan and it smelt of burnt insulation. I ordered a new fan and re-assembled in reverse order. Fan started up when compressor fired up. Fan was a plug & play item. Erroe Code cleared on the front and refrig is working fine. Only thing was the fan was not identical with the old one. It fit in the enclosure the same and the shaft was the same length. My old fan was 10 years old and they... Read more
Refrigerator not cooling or blowing warm air? This compressor assembly restores proper cooling. Advanced repair requiring EPA certification for refrigerant.
Replacement door stopper assembly that cushions and limits door travel. Installs at the hinge area. Needed when original is cracked, broken, or missing.
Reduce refrigerator rattling and humming from the compressor area. This damper absorbs vibration between the compressor and base for quieter operation.
Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.
The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the... Read more
Molded protective housing that shields internal wiring and hoses from wear and debris. Replace if cracked, broken, or missing to maintain safe operation.
Replace your refrigerator's cracked or discolored light lens cover to restore even illumination and protect the bulb from spills and impact. Confirm fit.
The lamp cover and freezer door gasket were simple to replace, however before doing the repairs I discovered that the water line to the ice maker was leaking therefore I got help from a repair person at a local appliance store to fix the line and he also helped with the installation of the ice chute door....I would say the most difficult part was getting to the old ice chute door to replace as you have to be careful that you don't break one of the tabs holding the dispenser unit in place, but... Read more