Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice dispenser door won't close or stays open causing frost buildup? This small torsion spring restores tension to snap the chute door closed properly.
Fix FF error codes and warm spots with this evaporator fan motor. Stops grinding noises and restores airflow. DIY-friendly, 30-minute repair.
Went online and searched for LG refrigerator error codes and discovered that code was freezedr fan failure. Ordered and replaced freezer fan motor assembly. Took longer to remove food from you freezer than to replace fan motor. Freezer working great now. Read more
Leveling leg assembly stabilizes and levels your refrigerator cabinet. Replace worn, stripped, cracked, or broken legs to eliminate rocking and vibration.
Pulled off the outer housing, unscrewed the bolt,replaced with new. Read more
Mounting bracket that supports the dispenser paddle behind your refrigerator's front panel. Replace if cracked, broken, or lever feels loose or misaligned.
Refrigerator was easy. Simply replaced the activator switch that was sticking. The range hood was a little more difficult. I had replaced the switch years ago but it still didn’t work. So I took on the challenge of replacing the transformer. That was difficult to get to but once replaced and reassembled the lights work fine. Read more
Replacement crisper drawer that installs in your refrigerator to store produce. Needed when your original drawer is cracked, broken, or missing a handle.
Received the correct parts and was able to install them Read more
Secures internal components in place to prevent rattling and misalignment. Replace if cracked, broken, or missing. Confirm fit with your model number.
Fixes unresponsive controls, freezer warming, and ice buildup. Replacing this defrost controller requires testing with multimeter. Typical DIY repair.
Installed a new control assembly. Read more
Fix error code CF, warm spots, or inconsistent cooling with this evaporator fan motor. DIYers complete this repair in about 30 minutes with basic tools.
Removed the old fan housing. Removed the fan from its housing and took the fan blade off. I then smelled the fan and it smelt of burnt insulation. I ordered a new fan and re-assembled in reverse order. Fan started up when compressor fired up. Fan was a plug & play item. Erroe Code cleared on the front and refrig is working fine. Only thing was the fan was not identical with the old one. It fit in the enclosure the same and the shaft was the same length. My old fan was 10 years old and they... Read more
Upper hinge assembly for refrigerator doors. Mounts at the top to support and pivot the door. Replace if hinge is worn, cracked, or broken to restore alignment.
Ordered gasket and hinges. Hired an appliance repair contractor to change out the old ones. It's fine now. Read more
Refrigerator not cooling or blowing warm air? This compressor assembly restores proper cooling. Advanced repair requiring EPA certification for refrigerant.
Replaces cracked or broken tube connector in your refrigerator. Secures and routes tubing to prevent leaks from loose connections. Easy install.
Reduce refrigerator rattling and humming from the compressor area. This damper absorbs vibration between the compressor and base for quieter operation.
Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.
The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the... Read more
Refrigerator won't start or stops running? A failed capacitor disrupts motor circuits. This film radial capacitor restores voltage stability and operation.
For an emergency fix I installed a 3 in1 kit disabling the original start cap and wiring in the original run cap to the run winding. Ordered the proper PTC and overload from Appliance Parts Pros and installed them 2 weeks later. The original start and run capacitor were good, rewired back to design specs. The original PTC had pins 1,2 and 3, the replacement had 2,3 and 4. Only wiring change was to install the red wire from pin 1 on the original PTC to pin 4 on the new PTC. Read more
Molded protective housing that shields internal wiring and hoses from wear and debris. Replace if cracked, broken, or missing to maintain safe operation.
Black refrigerator door handle for replacing cracked, broken, or worn handles. Installs on refrigerator door exterior for smooth opening and closing.