Lsd556ost Parts

Refrigerator not cooling properly? This 36-inch condenser coil removes heat from your fridge. Common fix for warm temps and overheating compressors.

This nozzle assembly directs fluid or airflow where the appliance needs it, restoring proper dispensing or spray performance. Use this direct-fit replacement to address flow or alignment issues without replacing larger components. What it does:

• Directs and focuses fluid or air flow from the appliance outlet
• Helps restore proper dispense or spray pattern for normal operation
• Commonly replaced when flow is reduced, uneven, or the nozzle is damaged
• Works with the existing mounting and seals when undamaged

• One genuine-style nozzle assembly

• Disconnect power and/or shut off water supply before beginning work
• Inspect surrounding seals and gaskets; replace if cracked or deformed
• Typically installs with simple snap clips or a few fasteners—refer to your model's service instructions

This hinge reattaches and supports a refrigerator door, restoring proper alignment and smooth opening. It helps prevent sagging doors and uneven sealing that can affect cooling and energy use. What it does:

• Provides the pivot point that lets the appliance door open and close securely
• Restores correct door alignment to improve seal and reduce rattle
• Helps eliminate sagging, sticking, or uneven door movement
• Works as a direct replacement hinge when original is damaged or worn

• Disconnect power and empty door shelves before starting; follow OEM safety guidance
• Support the door while removing/installing the hinge to avoid dropping or damaging the door
• Use the correct fasteners and torque to secure the hinge; verify door alignment after installation

This supporter hinge secures and supports a refrigerator/freezer door at the hinge point to keep the door aligned and operating smoothly. Replaces a worn or broken hinge to reduce sagging and uneven door closure. What it does:

• Provides structural support where the door meets the cabinet to maintain proper door alignment
• Helps the door open and close smoothly by stabilizing the hinge assembly
• Commonly used when door sags, binds, or does not seal properly
• Works with the cabinet hinge assembly to prevent excess wear on door seals and gaskets

• 1 supporter hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing/installing the hinge to prevent dropping or damage
• Retain and reuse any original screws if undamaged, or replace with OEM-specified fasteners

This supporter hinge is a replacement hinge support bracket that helps secure and align the appliance door so it opens and closes smoothly. It restores proper hinge positioning to reduce door sag and uneven sealing. What it does:

• Secures the door hinge assembly and provides a stable mounting point
• Helps maintain door alignment to improve sealing and reduce gaps
• Reduces door sag and uneven wear on hinge components
• Restores smooth door movement and consistent closing

• One supporter hinge / hinge support bracket

• Disconnect power to the appliance before starting any repair
• Remove the door per the service manual instructions to access the hinge support
• Use appropriate hand tools and keep fasteners organized for reassembly
• Do not overtighten mounting screws; adjust hinge alignment as needed after installation

Replacement screw for electric and gas ranges. Secures panels, brackets, and internal assemblies. Restores tight fit when original is missing or stripped.

This drain pump assembly removes used water from the dishwasher tub during the drain cycle, pushing it out through the drain hose. It includes the pump motor and housing. Replace this assembly if the dishwasher is not draining, water remains pooled at the bottom after a cycle, or you hear unusual humming or grinding noises during the drain phase.

Replace a cracked, stripped, or missing control knob to restore precise temperature and burner control. Simple snap-on installation takes minutes.

This is a left-side slide rail assembly that supports and guides the dish rack as it rolls in and out of the dishwasher. It mounts inside the dishwasher tub and allows smooth, even movement of the rack during loading and unloading. Replace this part if the dish rack is difficult to slide, sits unevenly, or falls off its track.

This outer door frame restores the appliance's front trim for proper fit and finished appearance. It replaces damaged or worn trim to help the door close evenly and maintain a clean look. What it does

• Replaces the outer door frame trim to restore correct alignment and sealing.
• Secures the door assembly and helps prevent gaps that can cause drafts or heat loss.
• Eliminates cosmetic damage like cracks, dents, or warped trim for improved appearance.
• Can reduce rattling or noisy operation caused by a loose or broken frame.

• Disconnect power to the appliance before starting any repair.
• Remove the door or access panels per the service manual to reach mounting screws—keep track of fasteners.
• Handle trim and any attached glass carefully to avoid breakage or injury.

Decorative trim piece that surrounds the rear of your range for a finished appearance. Replace if cracked, chipped, damaged, or missing for restored looks.

The Dishwasher Door Cable Connector Assembly is an OEM replacement part for LG dishwasher. The cable connector assembly works with the door cable to properly guide and support the door as it moves through the full range of opening and closing motions. 

Causes of a bad door cable connector can include wear and tear over time resulting in cracks, loose connections, or broken or damaged connectors that no longer securely attach the cable. 

Symptoms of a bad door cable connector include:

• The door not properly aligning when closed 
• Difficulty opening or closing the door smoothly
• Noisy operation or rattling sounds from the door area
• The door not latching securely in place

This OEM LG part is also compatible with select Sears/Kenmore brand models.

The Cover Assembly is an OEM component specifically designed for LG dishwashers. This assembly consists of the outer tub cover and inner mounted components that protect internal mechanisms.

Causes of a bad cover assembly can include cracks, dents, or other physical damage from regular loading and unloading of dishes. Harsh or abrasive cleaners can degrade protective surfaces over time as well. 

Symptoms of a bad cover assembly include:

• Water leaks inside or outside the dishwasher 
• Loose, unstable, or damaged outer tub cover
• Detached or broken mounting clips for inner components

This OEM LG part is also compatible with Sears/Kenmore dishwashers. Replacing the entire cover assembly restores integrity to protect sensitive inside parts. Proper maintenance extends the lifespan of exterior components.