Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Lsr5121jq1 Parts

Motor Start Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8529896

Installation instructions included.

Do-It-Yourself Stories from Customers like You You could here the motor try to start but nthen just hum   John H. • Brockton , MA • September 10, 2015

Found the motor switch was fried. So replaced that and the capacitor. Starts fine now. Read more

More
Connector (3 - Circuit)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3360056

Used for the pressure switch.

Do-It-Yourself Stories from Customers like You Broken lid switch   Ari G. • State College , PA • June 01, 2015

Watched on line Video. Only problem was in disconnecting wire "bus" connector from switch. I was unable to remove connector without damaging it. I "jumped" connector to prove switch was faulty. This also allowed my wife to continue to do laundry while part arrived. I ordered a 3 circuit connector, but this was not the correct part. I ended up removing 3 wires from old broken connector and attaching them to new switch without a connector. Electrical tape did the trick. Not perfect... Read more

More
Hinge
Genuine Whirlpool part
By: Whirlpool
Part Number: WP387402

Used for control panel.

Do-It-Yourself Stories from Customers like You Kenmore washer would not spin and made a grinding noise   Gregory B. • Wappingers Falls , NY • January 17, 2015

Replaced direct drive washer motor coupling. Instructional video was right on and easy to follow. Was able to save a 15 year old machine for a few bucks. The shipping was super fast (within 2 days) and the customer service is fabulous. I would definitely recommend to everyone. Read more

More
Washer Tub Support With Spin Tube
Genuine Whirlpool part
By: Whirlpool
Part Number: 280184

This tub support assembly holds the washing machine drum in place and includes the spin tube for water drainage. It replaces worn supports that cause excessive vibration, loud noises, or drum movement during operation. Install when your washer shakes violently, makes grinding sounds, or the drum feels loose.

Do-It-Yourself Stories from Customers like You A bunch of things. Leaking, clutch was slipping and not spinning very well, and the brake was not engaging..   Alan V. • Melrose Park , IL • November 11, 2022

I installed all the necessary parts that I received from you and it works great, now. I received the parts in good time without overnighting them. I had the whole washing machine apart and went through it all before ordering parts. Tear down and assembly was easy. I just took my time. The washer is 17 years old and was well built. It was worth it compared to what is on the market today, and cheaper. Read more

More
Endcap
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820038

 

Do-It-Yourself Stories from Customers like You Broken lid switch and 2 bad end caps screw fell out of washer lid   James M. • Pleasanton , TX • May 24, 2016

Drilled out the hole holding the lid screw and replaced with a machine screw and nut. replaced the lid switch and installed the 2 new end caps. Read more

More
Link
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63466

Used for leveling mechanism. Includes a quantity of one. Order as needed

More
Washer Lid
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10193874

This washer lid covers the top of your washing machine and contains the safety mechanisms that prevent the washer from operating when open. It houses the lid lock and safety switches that detect when the lid is properly closed. Replace this part if your washer won't start, the lid won't stay closed, or if the safety lock mechanism is broken.

Do-It-Yourself Stories from Customers like You Lid was rusted bad   Mike S. • San Lorenzo , CA • December 06, 2016

New parts easy fix Read more

More
Lubricant
Genuine Whirlpool part
By: Whirlpool
Part Number: 285208

Use only in brake shoe assembly on roller & pin. Color: White/Grey.

More
Base Frame Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: 285771

Used for direct drive washing machines. Complete assembly includes 2 level mechanism links, 1 level mechanism spring, 1 knurled pin, 2 rear feet, 1 pad plate, 1 suspension plate, 1 base pad, and 1 suspension spring retainer.

Do-It-Yourself Stories from Customers like You Base supports and legs were rusted and broken   Matthew D. • West Middlesex , PA • January 14, 2019

I ordered a Base frame assembly and front leveling feet along with locking nuts. I removed the broken parts by putting the washer on its' side and I removed the bolts on the bottom of the back panel and removed the motor and the transmission. I installed the new feet onto the new base frame and i slid the new frame into place and then I reattached everything. Read more

More
Washer Power Cord Strain Relief
Genuine Whirlpool part
By: Whirlpool
Part Number: 285777

This protective component secures the power cord where it enters the washer cabinet, preventing wire damage from movement or strain. Replace if the power cord pulls loose, shows signs of damage at the entry point, or the washer intermittently loses power.

More
Drain Protector
Genuine Whirlpool part
By: Whirlpool
Part Number: 367031

Catches lint, threads, and strings.

More
Automatic Washer (Direct Drive) - Whirlpool Repair Manuals
Genuine Whirlpool part
By: Whirlpool
Part Number: 4313896

Repair manual for top loading automatic direct drive washing machines made by Whirlpool. Covered brands include Whirlpool, Sears, Kenmore, Kitchen Aid, Roper, and Estate. Easy to follow photographs and step-by-step repair procedures.

Do-It-Yourself Stories from Customers like You Multiple machines agitator did not work on one machine other machine abruptly quit working and would not work at all.   Roy S. • Independence , MO • December 11, 2019

Replaced the agitator drive connector and dogs, worked well after a very quick fix. The second machine had a bad lid switch, replaced and solved the problem. Only took a few tools and a short amount of time and easy to do. Chat room was a good source of information. Read more

More
Suds Shield
Genuine Whirlpool part
By: Whirlpool
Part Number: 8539874

 

More
Lid Hinge Bumper
Genuine Whirlpool part
By: Whirlpool
Part Number: WP19119

 

Do-It-Yourself Stories from Customers like You Washer was "dead" with a partially washed load and would not do anything   Jimmy M. • Hopewell , VA • September 19, 2014

Researched this kenmore washer on-line and found the problem to be the lid switch. Saw a diagram on how to jump this switch by connecting a wire to both outside wires on the harness and voila! It worked! This is not a fix but it allowed me to finish the load of unwashed clothes and told me which part was bad (do not run washer jumped like this.......fire hazard!) Ordered the lid switch and it was an easy repair. A $14.00 switch was a lot cheaper than a $450.00 washer. Thanks appliance parts... Read more

More
Timer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946451

 

More
Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3955728

Water temperature control board.

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google