Maytag Bravos Model Parts

Size: .20 Fl. Oz. (6 ml)

This lid hinge arm connects the lid to the cabinet hinge, providing a smooth, stable pivot. A worn or broken arm can cause a loose, misaligned, or binding lid. Replace to restore proper lid movement. What it does:

• Provides the pivot point between the lid and hinge bracket
• Maintains lid alignment and controlled motion during opening and closing
• Failure symptoms include wobbling, squeaking, sticking, or the lid not closing flush
• Replace if the arm is cracked, bent, or broken

• Includes: 1 lid hinge arm

• Disconnect power before servicing; also shut off water supply
• Support the lid to prevent damage; tape it in place or have a helper hold it
• Remove hinge cover and mounting hardware; note orientation and transfer any spacers/bushings
• Install the new hinge arm and ensure smooth lid operation

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

This machine screw secures components in place to maintain proper alignment and stability during appliance operation. Replacing a worn or missing screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Provides a secure mechanical fasten for panels, brackets, or internal assemblies
• Helps correct rattling, vibration, or loose-fitting parts
• Useful when an original screw is stripped, corroded, or lost
• Sized to match 8-18 thread applications in compatible units

• Disconnect power and shut off water or gas before servicing
• Note original screw location and orientation for correct reassembly
• Start threads by hand to avoid cross-threading; do not overtighten
• Replace any damaged clips or mounts the screw engages

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Size: 10-24 x 3/8 inch.

Screw for control panel.

This top spring hinge provides the tension and pivot point that helps a laundry appliance door open and stay aligned for smooth operation. It restores proper door positioning and reduces sag or uneven closing. What it does:

• Replaces a worn or broken top spring hinge to restore door tension and alignment
• Helps prevent the door from sagging, sticking, or closing unevenly
• Restores consistent opening/closing motion and proper seal engagement
• Addresses symptoms such as a drooping door, noisy hinge movement, or difficulty keeping the door open

• Disconnect power and, if applicable, gas supply before beginning any repair
• Follow the appliance manufacturer's instructions; some models require door removal to access the top hinge
• Use proper hand tools and retain all fasteners; wear gloves and eye protection
• If both hinges show wear, consider replacing both to ensure balanced tension

This drain hose coupling connects two sections of the washer drain hose to restore a watertight path for wastewater, helping prevent leaks and restore proper draining. What it does:

• Joins two drain hose sections or connects hose to a mating outlet for secure water flow
• Seals the hose connection to reduce leaks at the joint
• Restores proper draining when a damaged or missing coupling causes slow drain or leakage
• Designed to fit the OEM hose profile for a snug, stable connection

• One drain hose coupling as shown

• Turn off power and water supply before starting any repair
• Inspect hose ends for damage; trim to clean cut if required for proper fit
• Push hose ends fully onto the coupling and secure with manufacturer-recommended clamps

This factory fastener secures appliance panels and components for a tight, rattle-free fit. Replace a missing, stripped, or corroded screw to keep assemblies aligned and performing as intended.

• Fastens panels, brackets, or assemblies in place
• Helps reduce vibration and rattling caused by loose hardware
• Maintains proper alignment of parts to prevent premature wear
• Common signs you need it: missing screw, loose panel, vibration/buzzing noises, or hardware that won't tighten

• Disconnect power; for gas or water-connected appliances, shut off supply lines before service
• Match the screw to the original; verify size, length, and thread before installation
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Snug only—do not overtighten, especially into plastic or thin sheet metal

This tub ring (impeller) is the molded plastic ring that helps direct water flow under the wash plate so the washer agitates and rinses properly. Replacing a worn or damaged ring can restore normal wash action and performance. What it does

• Directs and channels water flow beneath the wash plate to support agitation and rinsing.
• Helps maintain balanced water movement for consistent cleaning.
• Worn or broken rings can contribute to poor agitation, clothes remaining soapy, or unusual wash-cycle noise/vibration.
• Works as part of the washplate/agitator assembly to ensure proper water circulation.

• One tub ring/impeller

• Disconnect power to the washer before beginning any repair.
• Remove the wash plate/agitator per your model's service instructions to access the ring.
• Install the ring in the correct orientation and verify it seats fully on the hub; do not force or deform the part.
• After reassembly, run a short test cycle to check for leaks or abnormal noise.

This syphon breaker prevents dirty drain water from being siphoned back into the dishwasher, helping maintain proper draining and protect wash water from contamination. It's a direct-replacement drain air-break for compatible dishwashers. What it does:

• Stops backflow/siphoning from the household drain into the dishwasher
• Helps maintain proper drain performance and prevents wastewater re-entry
• Can reduce odors and cloudy or soiled dishes caused by contaminated wash water
• Works as part of the dishwasher's drain plumbing to preserve wash hygiene

• Disconnect power to the appliance and turn off water supply before servicing
• Replace only with identical part and ensure correct hose routing and secure clamps
• Inspect adjacent drain hoses and connections; replace damaged hoses or clamps as needed

This top panel lock replaces a worn or broken front lock that secures the appliance's top panel. It restores a solid, secure top panel and helps prevent accidental opening during use. What it does:

• Acts as the front latch to hold the top panel closed
• Prevents the top from shifting, rattling, or coming loose during operation
• Helps stop access to internal components when the top is closed
• Commonly used when the top panel is loose, won't stay closed, or the latch is broken

• Disconnect power before beginning any repair to avoid shock or injury
• Basic hand tools (screwdriver) are typically needed
• Remove the top panel carefully to access the lock; note screw locations for reassembly
• Test the lock and panel alignment after reinstalling to ensure proper operation

This right-side hinge spring helps restore proper door tension and alignment so the appliance door opens and closes smoothly. Replace a worn or broken spring to reduce sagging, uneven closure, and noisy hinge operation. What it does:

• Provides tension for the right door hinge to maintain correct door alignment and closing force
• Helps stop the door from sagging or drifting open
• Reduces grinding, squeaking, or other hinge noises caused by a worn spring
• Works as part of the hinge assembly to support normal door motion

• Disconnect power and empty the door before starting; support the door to prevent dropping.
• Use appropriate hand tools; follow manufacturer service instructions for safe removal and installation.
• Inspect surrounding hinge components and fasteners; replace or tighten as needed for proper alignment.

This lower wire harness connects and routes electrical circuits for the appliance's lower service area, restoring reliable power and signal flow to dispensers and lower controls. It's a direct-fit replacement when the original harness is damaged. What it does:

• Routes and links power and signal wires between lower components and the main control
• Replaces frayed, pinched, or broken wiring that can cause intermittent or no operation
• Helps resolve symptoms such as non-working lower dispenser functions, loss of lights, or erratic component behavior
• Maintains connector fit and OEM routing for proper electrical performance

• Disconnect power (and water if applicable) before starting any repair
• Inspect connectors and terminals for corrosion; replace if found
• Follow for routing and securing the harness to avoid pinch points
• Do not splice or modify the harness; use the exact replacement for safety and proper operation

This drain hose coupling kit connects the washer drain hose to the appliance drain outlet, restoring a secure, leak-resistant hose connection and preventing water leaks during drain cycles. What it does:

• Provides a replacement coupling to join the drain hose to the washer drain outlet
• Re-establishes a tight hose connection to reduce leaks and water damage
• Addresses symptoms such as leaking at the drain connection or a loose hose fit
• Compatible with affected Whirlpool top-load washer drain assemblies

• Unplug the appliance before servicing and work on a dry surface
• Remove the old coupling and inspect the hose and outlet for damage before installing
• Ensure the hose is fully seated and secure with the existing or supplied clamp(s)