Mdb7960awq Parts

Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679

This factory fastener replaces a worn, stripped, or missing screw to securely hold appliance components in place, restoring proper fit and reducing vibration, noise, and loosening issues. It helps maintain alignment and safe operation of the affected assembly. What it does:

• Secures panels, brackets, or internal components as designed for the appliance
• Maintains assembly alignment for reliable performance
• Helps prevent rattling or vibration from loose hardware
• Replace when the original screw is missing, corroded, stripped, or damaged

• 1 screw

• Disconnect power; for gas- or water-connected appliances, shut off supply before servicing
• Match the screw to its original location and retain any spacers or clips used with the original
• Start threads by hand to avoid cross-threading; use the correct driver size
• Tighten until snug; do not overtighten to avoid stripping threads

Restores smooth height adjustment for your dishwasher's upper rack. Replace when rack slides down, won't stay level, or feels loose. Confirm fit with model.

This factory-specified screw secures panels, brackets, and internal components in your appliance. Replacing worn or missing hardware restores a tight fit to help reduce vibration, noise, and premature wear.

• Fastens sheet metal, brackets, or plastic parts as designed by the manufacturer
• Helps maintain alignment and reduce vibration/rattling
• Direct replacement for stripped, corroded, or missing screws
• Common signs: loose panels or trim, shifting components, screw won't tighten

• Disconnect power; shut off water or gas supply if applicable
• Use the correct driver to avoid stripping the head
• Start threads by hand to prevent cross-threading; tighten snugly without overtightening
• Replace one-for-one in the original location per service information

Metal toe panel for dishwashers. Covers the bottom front edge of the unit. Replace if cracked, dented, scratched, or missing to restore appearance.

Replacement mounting screw for dishwashers and ranges. Secures panels, brackets, and internal components when original hardware is stripped, missing, or corroded.

Fix dishwasher leaks at the bottom with a new sump and seal assembly. Replaces cracked sumps or worn seals causing water pooling under the unit.

Secures water inlet tubing to create a leak-resistant seal. Replace if cracked, stripped, or leaking at the connection. Verify fit with your model.

If your dishwasher door drops, slams, or feels heavy, the door balance mount may be broken. This side-frame bracket anchors the spring system.

Replacement tub wheel that supports and guides the washer drum for smooth, aligned rotation. Replace worn wheels to reduce drum noise, rubbing and uneven spinning. What it does:

• Supports and guides the washer drum so it turns smoothly and stays aligned.
• Reduces friction between the drum and cabinet, helping prevent scraping or binding.
• Replace if the drum squeaks, drags, rubs, or wobbles during spin cycles.

• Disconnect power and turn off water supply before servicing the appliance.
• Access may require removing the cabinet, front or rear panel depending on model.
• Inspect adjacent shafts, bearings and mounts for wear and replace if needed.
• Reassemble and test the washer after installation to ensure proper drum movement.

Replace your dishwasher's inner door seal to stop leaks and contain wash water. Installs between door liner and panel. Confirm fit with your model number.

This factory screw secures components in your appliance to keep them properly mounted and stable during operation. Replacing a missing or damaged screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Fastens panels, brackets, or trim to maintain correct alignment
• Can address rattling, vibration, or loose/misaligned parts where this screw is used
• Helps prevent wear from movement caused by missing or stripped hardware

• Unplug power and shut off utilities before service
• Note original screw location and orientation; replace like-for-like
• Do not overtighten—start by hand to avoid cross-threading
• Address threads before installing the new screw

Connects the dishwasher sump outlet to the drain hose. Replace if cracked, leaking, or if the internal flapper valve is warped and no longer sealing.

Bottle with brush. Color: Black. Size: 0.6 fl.oz.

The dishwasher shield protects internal components from water and heat damage, typically located near the heating element or pump motor. Replace when you notice water leaking from unusual areas or if the shield appears cracked, warped, or corroded.

The Inlet Hose is an OEM part for Whirlpool built-in dishwasher models. This hose delivers fresh water from the household supply to the appliance spray arms and pumps. 

Symptoms of a faulty inlet hose include:

• Leaks or drips around hose connections  
• Kinks or cracks in the supply line tubing
• Restricted or no water flow to critical systems
• Improper water levels causing wash performance issues

Causes can be deformation from tight bends over time. Mineral buildup inside the hose is also common with extended use. Accidental damage during plumbing work presents another potential cause.

This authentic Whirlpool replacement is compatible with some Maytag, Jenn-Air and Amana dishwasher brands as well.