Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This mounting bracket secures an appliance component in the correct position, providing stable support and alignment. Replacing a damaged bracket helps stop looseness and vibration that can lead to noise, poor fit, or premature wear.
The original gasket was popping loose and not always noticeable when loading. Followed video for removal, cleaning channel with q-tips, and installation of new gasket. Read more
The Power Cord Kit is an OEM replacement part for Whirlpool dishwashers. It is a 3-prong grounded, 16-gauge cord that includes all the hardware needed for installation. Includes all hardware needed for installation. Causes of a bad power cord can include normal wear and tear over years of use, accidental impacts or cuts to the wiring, or improper installation that damages components. Symptoms of a bad power cord include:
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly. Read more
Fixes loose panels, rattling doors, or wobbly components caused by stripped or missing screws. Secures brackets, covers, and mounting hardware. Easy DIY.
Maytag Dishwasher (about 5 years old). Some of the buttons had stopped functioning. Then the Start button began choosing whether or not to work. Eventually it would not start at all. Upon removing the control panel, the first thing I noticed was that the brackets that hold the two lower screws were broken. (So this was the reason that the door was so hard to open from the time it was new.) I trouble shot the thermal fuse, the door-latch switches, and inspected the control board trying to find... Read more
Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)
I ordered new seals from AppliancePartsPros.com. Finding the right seals was very easy, all based on model number of the appliance. While looking my unit over for other signs of wear, I noticed that a repair done by the prior homeowner to the lower wash arm was done improperly: a seal there was set protruding from the cover, the cover was missing screws, and the arm was missing the upper bushing. So I ordered a new seal, the missing screws, and both the top and bottom bushings (just to be... Read more
The Hex-Head Screw is an OEM replacement part for use in Whirlpool dishwashers. This metal screw measures approximately ¾ inch long. Its primary purpose is to secure the dispenser bracket in place, ensuring stable operation. This hex-head screw is designed for use with compatible hexagonal tools. This makes installation and removal straightforward. This part is sold individually and is guaranteed to fit your dishwasher door panel. This screw is compatible with select Whirlpool brand models including Amana, Crosley, Estate, Inglis, Jenn Air, Kenmore, Kitchen Aid, and Maytag.
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself! Read more
Grey vinyl touch-up paint for repairing chipped, rusted, or damaged dishwasher rack coating. 4oz bottle with brush. Restores protective coating.
Used the vinyl touch up paint on the tops of posts and slid vinyl tips over 130 posts. The paint acts as an adhesive to keep the tips secure. Read more
This power cord connects your appliance to a household outlet. Replacing a worn or damaged cord restores safe, reliable power and can help resolve no-power or intermittent power issues caused by a compromised lead.
Replaced the drain & fill lines on a portable dishwasher, now works prefect no leaks. Had to return the insulation blanket it would not fit under the counter for the built-in dishwasher. Read more
Black control panel for your dishwasher. Mounts on the front door. Replace if buttons are cracked, worn, unresponsive, or panel is damaged or missing.
Replaced the control panel. Read more
Black access panel kit for dishwasher lower front area. Replaces missing, cracked, or damaged toe panel assembly. Secures under cabinet for finished look.
I found the part number, double checked it, and ordered the part, which arrived as promised. However, the part was just placed in a folded cardboard tube and was damaged by the shipper. I figured it was only a toe-kick, so I bent the part as best I could and installed it in 3 minutes. Read more
If your dishwasher's top rack won't stay level or falls out of position, this left-side rack adjuster is the fix. Quick 15-minute DIY replacement.
Needed to replace the top rack adjusters and one rail slide out. Parts came in less than 24 hours. Replacement parts were metal instead of plastic. Took me about 15 minutes to replace everything. Read more
This small clip secures the guard/shield on the dispenser assembly. Replacing a cracked or missing clip keeps the guard firmly attached and aligned so the dispenser operates properly without interference, noise, or premature product loss. What it does:
I searched the model on Appliancepartspros.com and ordered the items needed with overnight shipping. My order came the next day :) All parts were in stock and came clearly labeled and orderly packaged. Within 10 minutes my dishwasher was back in business and I was one happy camper. I would order from here again anytime and attempt to fixt the issue myself. Much cheaper that having somebody come out, only to tell you that they have to order the parts and come back at a later time to fix the... Read more
This replacement support restores a firm, level mount for its paired component inside your appliance. It keeps the part properly seated and aligned so shelves, racks, bins, or mechanisms remain stable and operate as intended. What it does:
Took out 3 torx screws on each side, much of the insides fell out at this point. At this point I had the new part and what was left of the old part and the adjust lever. Screwed them back together and that was that. The new support piece was not needed. Read more
Upper rack won't stay level or falls off the rail? This right-hand adjuster restores secure height adjustment. DIY-friendly 15-minute repair fix.
Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines. Read more
This factory-specified screw secures panels, brackets, and internal components in your appliance. Replacing worn or missing hardware restores a tight fit to help reduce vibration, noise, and premature wear.
My son fixed the issue of some wear and tear. Read more
Connects the user interface to the main control board in your dishwasher. Replace if damaged, heat-stressed, or causing communication issues.
The dishwasher control panel was acting funny, not showing cycle times. So I pulled the plug and restarted it. Then it gave the E2/F2 code. Some googling turned up some ideas, beginning with checking the wires and voltages. I checked those, and found that the control panel was giving the proper voltage. The next step is to replace the user interface. I found the part on AppliancePartPros.com at a reasonable price. They sent it quickly. It was a fairly straightforward install, but you do... Read more