Mdb959sbs1 Parts

Dishwasher motor hums but won't start? This capacitor provides the phase shift needed for your circulation motor to run. Easy 15-minute repair.

Fix a cracked or broken door handle that's hard to open or close. This dishwasher door handle typically takes 10-15 minutes to replace.

Fix a loose heating element with this dishwasher heater terminal nut. Secures element studs to the tub exterior. Simple fix for missing or corroded nuts.

Fixes dirty water or food specks remaining after wash cycles. This check valve prevents backflow into the dishwasher sump. Moderately easy repair.

This is the longer of the two dispenser lid hinge pins. For the shorter lid hinge pin order WPY912679.

Secures hose connections to circulation motor and sump in your dishwasher. Replace if loose or worn to prevent leaks. Confirm fit with your model number.

The Sensor is an OEM replacement part for Whirlpool dishwashers. It detects the level of dirt and food particles in the wash water to help the dishwasher adjust the wash cycle accordingly, providing efficient and thorough cleaning results. It monitors the clarity of the water and determines when additional rinsing or detergent is needed.

Symptoms of a faulty sensor include:

• Inadequate cleaning performance
• Dishes remaining dirty or stained after a wash cycle
• Extended cycle times or the dishwasher not completing the cycle

A bad sensor can occur due to regular usage, buildup of residue or debris, or electronic malfunctions. If you notice issues such as poor cleaning results, dishes not being thoroughly washed, or the dishwasher not completing the cycle, it may be time to replace the sensor with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replacement water supply hose for dishwashers. Connects household water line to the dishwasher inlet. Replace if cracked, leaking, or damaged.

The Insulation is an OEM part for Whirlpool dishwashers. It is foam insulation installed around the inside tub walls and door to maintain optimal temperatures during wash cycles. The insulation plays a key role in retaining heat within the dishwasher, allowing for efficient water heating when needed.

Symptoms of bad insulation include:

• Ineffective or inconsistent water heating during hot cycles   
• Higher energy usage from the heating element running for longer periods
• Slower cycle times and inability to reach required temperatures
• Moisture collection or condensation forming inside tub surfaces

Causes of bad insulation can include the breakdown of the insulating foam material over time due to constant vibration and temperature fluctuations. Other potential causes are punctures or cracks developed from long-term vibration, impact from dish loads, or shipping damage. 

This insulation replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore dishwashers.

Fix a hard-to-open dishwasher door or broken handle with this latch handle. Simple 30-minute repair—remove inner door panel and snap into place.

Insulates your dishwasher tub to reduce noise and maintain temperature. Replace if worn, damaged by pests, or causing odors. Confirm fit with your model.

This is the shorter of the two dispenser lid hinge pins. For the longer lid hinge pin order WP6-912678.

Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.

This factory hardware nut secures threaded components inside your appliance, keeping parts tight and properly aligned during operation. Replace a stripped, corroded, or missing nut to restore a solid connection and prevent looseness or noise.

• Threads onto a matching bolt or stud to clamp parts together securely
• Helps maintain clamping force under vibration when properly tightened
• Replace if threads are worn, rounded, cracked, or rusted
• Symptoms can include loose or rattling parts, misalignment, or a fastener that won't tighten; in sealed water-path locations, leaks may occur

• Disconnect power; shut off water and/or gas before service
• Hand-start the nut to avoid cross-threading; finish tightening with the proper tool
• Do not overtighten; follow model-specific torque guidance if available
• Inspect the mating bolt/stud and any seals or washers during reassembly; replace if damaged

Sound shield installs behind the toe plate at the bottom of your dishwasher to insulate and reduce noise. Replace if cracked, missing, or damaged.

Dishwasher won't start or run? A worn door strike prevents the latch from engaging. Easy 10-minute fix with one screw—pull unit out 3-4 inches.