Mdbh9795ab0 Parts

The Dishwasher Door Seal is an OEM replacement part for Whirlpool dishwashers. It provides a tight seal around the dishwasher door to prevent water, sound, and heat from escaping during the wash cycle. Measuring 71” in length (and stretching up to 75”), this door seal prevents water from leaking out during wash cycles.

Causes of a bad seal can include cracks, tears, or splits that develop due to regular use and age. Damage may also occur from over-tightening of the door or accidental impact.

Symptoms of a bad dishwasher door seal include:

• Water or moist air leaks around the door during a cycle  
• Higher energy bills due to hot air escaping
• Excess moisture or mineral deposits around the door seal area
• Food particles or debris trapped under a torn seal

This genuine OEM Whirlpool replacement seal is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Circulation Motor is an OEM part for Whirlpool dishwashers. It is responsible for pumping water through the spray arms to ensure thorough cleaning of dishes during the wash cycle. This motor helps maintain consistent water pressure and flow, crucial for effective dishwashing performance.

Over time, the circulation motor can fail due to factors such as motor wear, electrical issues, or blockages that cause the motor to overheat or become damaged. Regular use and the buildup of debris or hard water deposits can also contribute to motor failure.

Symptoms of a bad circulation motor include:

• Poor cleaning results
• Unusual noises during the wash cycle
• Water not circulating properly
• Dishwasher not completing cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Pump and Motor Assembly is an OEM part for Whirlpool dishwashers. This part is responsible for circulating water during the wash cycle and draining water at the end of the cycle.  

Causes of a bad assembly can include blockages from debris, electrical failures, or wear and tear from regular use.  

Symptoms of a bad Pump and Motor Assembly include:

• Dishes remaining dirty after a wash cycle
• Water not draining properly from the dishwasher
• Unusual noises during operation
• Error codes related to water flow or pump performance

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Black - Part has been changed to an Access Panel Kit - The toe panel is no longer used.

Restore reliable cycle control with this electronic control board. It serves as the dishwasher's brain, coordinating wash, drain, and dry functions so the machine starts, runs, and completes cycles as expected.

• Orchestrates cycle timing and interprets sensor inputs
• Distributes power to components such as the wash motor, drain pump, and water inlet valve
• Communicates with the user interface to execute cycle selections
• Typical failure symptoms include: won't start or power up, cycles won't advance, stops mid-cycle, won't fill or drain, or control-related error codes

• Disconnect power at the breaker and turn off water supply before servicing
• Use ESD protection and handle the board by its edges only
• Access the control area, move wire connectors one at a time to the new board, and secure it in the original mounting
• Restore power and, if available, run the unit's diagnostic/service cycle to verify operation

This connector links mating components within the appliance to create a secure, reliable connection. Replacing a cracked or loose connector helps restore consistent operation and prevent intermittent issues caused by poor contact or separation. What it does:

• Creates a stable connection between mating parts or harnesses in the appliance
• Helps prevent looseness or separation that can disrupt performance
• Direct replacement for broken, brittle, or deformed connectors
• Can resolve intermittent operation traced to a poor connection at this junction

• 1 connector

• Disconnect power and, if applicable, shut off water before servicing
• Note orientation and positions before removal to ensure correct reassembly
• Seat the connector fully until any locking features engage; do not force
• Inspect mating parts for wear or damage and replace if necessary

This interconnect jumper wire restores a direct electrical connection between control components so your appliance can communicate and operate correctly. It replaces a damaged or broken harness jumper to help recover lost functions. What it does:

• Carries low-voltage signals between control boards, switches, or sensors
• Replaces frayed, broken, or burned jumper leads that cause intermittent operation
• Commonly used when controls fail to respond, cycles stop, or displays/indicators behave erratically
• Maintains original routing and connector fit to preserve factory wiring layout

• One interconnect jumper wire

• Disconnect power to the appliance before servicing to avoid shock or damage
• Verify connector orientation and seat firmly; avoid forcing mismatched plugs
• Route away from heating elements and moving parts; secure with existing clips or ties

This door basket is the replacement shelf that mounts to the inside of a dishwasher door to hold small items and organize silverware. It restores secure storage and proper loading on the door for reliable washing. What it does:

• Provides a stable shelf on the dishwasher door to hold small items and cutlery during cycles
• Keeps utensils and small items separated to improve water flow and cleaning
• Replaces cracked, broken or missing door-mounted storage that lets items fall or shift
• Helps maintain proper door alignment and sealing when clipped into place

• One door basket

• Disconnect power to the appliance before beginning any work
• Remove items from the door and open the inner door panel as needed to access mounting clips
• Align the basket with the door mounts and snap or secure it into place; verify it seats firmly

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This spacer fits between tank components to maintain proper spacing and alignment, helping reduce vibration and wear. Use this genuine replacement to restore correct clearances and improve stability in the appliance's tank assembly. What it does:

• Positions and separates tank parts to maintain correct alignment during operation
• Helps reduce noise and vibration caused by misaligned components
• Prevents metal-to-metal contact that can cause premature wear or damage
• Restores factory clearances after service or replacement of tank parts

• One spacer

• Designed for direct replacement; use the OEM mounting location and orientation
• Disconnect power and water (if applicable) before beginning repair
• If fasteners or surrounding components are worn or damaged, replace them to ensure a secure fit

Color: Black

A small metal spacer plate used to position and support nearby components for correct alignment and clearance. Replaces a worn or missing spacer to restore proper fit and reduce rubbing or vibration. What it does:

• Holds components at the correct distance to prevent contact or interference
• Maintains alignment of panels or assemblies for reliable operation
• Helps stop vibration-related noise caused by loose or misaligned parts
• Preserves sealing/fit where precise spacing is required

• Disconnect power before servicing to avoid shock or injury
• Handle sharp sheet-metal edges carefully and wear gloves
• Install in the same orientation as the original; secure with the factory fasteners
• Do not force or overtighten fasteners—ensure proper alignment before fully torquing

Color: Stainless