Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
4-wire power cord connects your electric dryer to a 4-prong household outlet. Replace a worn, damaged, or overheated cord to restore safe power connection.
I previously ordered the heating element, thermostat, and fuse. Also the rear drum rollers. However, after completing that repair I noticed that the terminal block and power cord had some damage from an apparent overheating while allowing the dryer to continue to run in order to dry the clothes. All is well now and the unit is working just fine. I appreciate the quick delivery of all 3 orders. Read more
Channels dryer exhaust to external vent connection. Replace if rusted, leaking, or screen is damaged to restore proper airflow and drying performance.
My son and I took the back panel off the dryer and found that the dryer was full of lint. It was very dirty and probably explains why the dryer had no been working as well. We cleaned the dryer out, took off the old air duct assembly and replaced it with the new one. We also replaced the old dryer hose while we had it pulled out. The repair was very easy, simply a matter of unscrewing screws and then reattaching them. Based on how dirty the dryer was it is probably a good idea to check the... Read more
Stable platform that sits inside your dryer drum for tumble-free drying of shoes, sweaters, and delicates. Replace if cracked, warped, or missing.
Bought the part for my dryer and it work very good. Read more
Secure brackets and hardware for stacking a dryer on top of a front-load washer. Needed when vertically installing units to save floor space.
No one locally had any stack kits, nor could they tell me if it was even possible to stack appliances of differing models. Your technician took the time to help solve the problem. The stack kit fits perfectly. Read more
Dryer repair kit replaces worn belt, idler pulley, and drum rollers that cause noise and poor drum movement. Restores smooth operation. Verify fit by model.
Covers and protects your dryer's light bulb from heat and debris while diffusing illumination. Replace if cracked, yellowed, or missing. Confirm fit.
Purchased the light lens and screwed it into the dryer drum. Read more
Flexible narrow brush reaches under and behind refrigerator cabinet to clean condenser coils and vents. Replace worn or missing brush to remove dust buildup.
Replaced bad condenser motor Read more
This control knob attaches to the appliance's control shaft so you can select settings with a solid, positive feel. Replace a cracked, stripped, or missing knob to restore smooth operation and a clean, finished look.
Ordered a knob that was compatible. Worked great only it did not have a pointer telling you what setting you were on. This was solved by using a magic marker once we figured out where to put it. Read more
Dryer won't start when door is closed? The door switch signals when the door is latched. This common repair typically takes 15-30 minutes with basic tools.
Dryer keeps running with door open? This door switch detects door position and stops operation when opened. Typical DIY repair takes 15-30 minutes.
Replaced the switch at the door to the dryer with the new one in about ten minutes and that was the problem, started it right up , works great. Read more
Fiberglass-reinforced door seal that restores airtight closure to maintain consistent temps and reduce energy waste. Replace if torn or compressed.
Replacement screw for securing panels, brackets, and internal components. Needed when original hardware is stripped, missing, or damaged during repairs.
We replaced the broken door hinge. Read more
This assembly includes the housing and door that enclose the lint screen filter compartment on the top or front of the dryer. It provides access to the lint filter for cleaning and keeps the filter securely in place during operation. Replace this part if the door is cracked, broken, won't stay closed, or if the housing is damaged and no longer holds the lint screen properly.
Open dryer door. Remove four Phillip head screws that hold lint assembly together. Two inside and two on the outside. There is also a hex head screw behind the front panel. To get at it I removed the four hex heads at bottom of front panel and four star head screws on left side of front panel. I was able to get at it by pulling the front panel out as much as possible and and reaching from the side with small quarter inch socket. Remove lint assembly, vacuum out everything and replace with new... Read more
Replace your dryer's front drum bulkhead to restore proper drum alignment and eliminate rubbing, noise, and excessive play. Confirm fit with your model number.
New bulkhead Read more
Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.
It was very easy to fix after watching your video.. Read more
Dryer won't heat or clothes stay wet? A failed heating element is often the cause. This part restores consistent heat to dry clothes properly again.
Replaced the heating element, which came complete with the two thermostats, wiring harness, and the mounting plate. Installed the new element unit, plugged in the dryer and tested to be sure the new element worked. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.