Medx700xwo Parts

This drum baffle restores proper tumbling by lifting and separating laundry as the dryer drum rotates. It helps improve drying performance and reduces garment bunching. What it does:

• Lifts and tumbles clothes so air flows more evenly through the load
• Helps prevent garments from clumping or wrapping around the drum
• Can reduce rubbing, thumping, or scraping noises caused by a loose or damaged lifter
• Restores consistent drum contact and improves drying efficiency

• Disconnect power before starting any repair to avoid shock or injury
• Access typically requires opening the dryer cabinet or front panel; small tools may be needed
• Align the baffle with factory mounting holes and secure with existing fasteners; use correct screws if replacements are required
• Inspect and replace worn drum or support parts as needed for reliable operation

Small replacement clip that secures panels or small internal components to restore a snug fit and reduce rattling or misalignment. Use this clip when a worn or broken retainer lets trim or parts sit loose. What it does:

• Holds trim, panels or other small appliance components in place to maintain correct alignment.
• Helps eliminate rattling, vibration noise or gaps caused by a missing or damaged clip.
• Restores secure fit where a broken clip allows parts to shift or separate.
• Simple, low-profile replacement part used in affected Whirlpool appliances.

• Disconnect power (unplug or shut off breaker) before servicing any appliance.
• Small part; keep track of screws and retainers during disassembly.
• Basic hand tools may be required; trim or panel removal might be necessary to access the clip.

Dryer Vent Test Kit ensures your dryer's vent system is operating properly. Kit includes two tests depending on the location of your dryer's lint screen: One for the lint screen in the top of your dryer, and one for the lint screen in the front of your dryer. Instructions included.

This multi-vent plug seals an unused vent opening to stop unwanted airflow and keep the appliance interior protected. It's a direct-fit replacement designed to restore proper venting and help prevent drafts, debris, and pests. What it does:

• Plugs an unused multi-vent opening to prevent air leakage and drafts
• Helps keep dust, lint, and small debris out of the appliance vent path
• Reduces the chance of pest entry through an open vent
• Restores the intended vent configuration after service or part removal

• Disconnect power or gas to the appliance before servicing for safety
• Install by aligning and pressing the plug firmly into the vent opening until seated
• Do not force if resistance is excessive; inspect for obstructions or damage
• Replace damaged parts before installing the plug

This is a drum assembly used in many home dryers. The component is located inside the appliance and is tasked with holding the clothing during a dryer cycle. It is made of durable materials but can experience wear and tear or damage that cause it to malfunction. If the drum assembly is worn or damaged, it may cause the appliance to buzz or squeal, start and stop, and seize up during use.If the drum assembly is damaged or worn, it will need to be replaced. This will require a set of tools and a pair of work gloves. Before starting the replacement process, make sure the dryer is unplugged from the wall. The dryer will need to be disassembled to access the drum assembly. The belt can be used to pull out the drum so the new component can be installed. Replace the part and reassemble the dryer. It should be plugged back in before use.This part is sold on an individual basis. It is designed to be used with several dryers created by Admiral, Amana, Maytag, Kenmore, and Whirlpool. The drum assembly is an authentic OEM replacement part that is sourced directly from the manufacturer.

A replacement mounting screw to secure appliance panels and components so parts stay properly fastened during normal use. Small but essential hardware for stable, rattle-free operation and reliable repairs. What it does:

• Fastens panels, brackets or components to the appliance chassis
• Prevents loose panels, vibration noise, or parts shifting during operation
• Used when original screw is lost, damaged, or stripped
• Restores proper fit and alignment after disassembly for service

• Disconnect power and water before starting any repair
• Use the correct screw type and length; do not force or substitute oversized fasteners
• Tighten until snug—avoid overtightening to prevent stripped threads or cracked parts
• Keep small parts away from children and pets

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This door hinge secures and guides your appliance door for smooth opening and reliable closing. It restores proper door alignment to reduce gaps, rubbing, and unwanted movement for a better seal and operation. What it does:

• Provides a solid pivot point so the door opens and closes smoothly
• Restores correct door alignment to help maintain a proper seal
• Stops door sagging, rubbing, or dragging that can cause wear or leaks
• Reduces rattling or noisy operation caused by a worn hinge

• Disconnect power or unplug the appliance before starting any repair
• Support the door during removal and installation to prevent damage or injury
• Handle mounting hardware carefully; reuse or replace fasteners as required
• Consider replacing all affected hinges for best alignment

This electronic control board assembly is the dryer's user interface that runs cycles and responds to your button presses and display. Replacing a faulty board restores reliable control and visible cycle selection. What it does:

• Manages cycle selection, timer, and display feedback for the dryer
• Processes button and touch inputs so commands start and run correctly
• Controls signals to the dryer's motors, heaters and sensors via the main control system
• Resolves symptoms like unresponsive controls, blank or erratic display, or failure to start

• One electronic control board assembly (user interface)

• Always disconnect power to the dryer before starting work to avoid shock
• Handle the board by its edges and avoid static discharge; use an anti-static strap if available
• Removal typically requires accessing the control panel—keep screws and small parts organized

This outer door assembly replaces a damaged or cosmetically worn outer door panel to restore the appliance's front appearance and provide a stable mounting surface for the inner door components. It fits the existing hinge and latch locations for a direct replacement. What it does:

• Replaces a cracked, dented, or scratched outer door panel to improve appearance and protect inner components
• Restores proper door alignment and helps ensure the door closes securely
• Provides the structural outer surface for the door trim, glass, and latch assembly
• Helps prevent drafts, moisture, and debris from entering the door cavity

• One outer door assembly as shown

• Disconnect power (and gas if applicable) before beginning any repair
• Handle the door assembly carefully to avoid scratching the finish or damaging attached components
• Support the door while removing hinge fasteners and align hinge pins during reinstallation to avoid binding

This exhaust pipe routes exhaust air from the appliance to the home vent, restoring proper airflow for safe, efficient operation. Use when the original pipe is cracked, bent, or leaking. What it does:

• Channels exhaust gases and lint from the appliance to the external vent
• Prevents exhaust leaks that can cause poor drying or cooking performance
• Helps maintain correct airflow to reduce overheating and moisture buildup
• Fits where a damaged or corroded exhaust connection needs replacement

• One exhaust pipe

• Disconnect power (and gas if applicable) before servicing; follow appliance safety procedures
• Inspect surrounding seals and clamps; replace clamps or ducting if damaged
• Secure pipe with OEM-recommended fasteners and ensure vent path is clear