Memcw301es10 Parts

One of the three-door switches had failed. In my case, 00631512 or ref 25217585 on the left front of the unit. The green button no longer "clicked". When that switch fails, one of the ceramic fuses located under the top cover at the far back of the unit is blown. Used Volt-Ohm meter to determine which fuse. Happy to have also ordered a replacement door switch Support, just in case, as I was unable to remove the failed switch from the support without breaking a key brittle plastic tab.... Read more

• Oven not heating evenly
• temperature not accurate

Guessed it must be either a heat sensor or a lower element. Bosch wall oven with no easy access to the back of the stove. Had to remove the door (very Heavy) to more easily access the temperature sensor. I thought from a video that the sensor could be easily replaced without having to access the red of the stove - not true! The sensor wire was secured to other wires and a clip screwed into the sheet metal. I was able to remove all screws with a Torx head driver. Since I had to pull the unit out... Read more

• Light not working

Changed light bulbs Read more

• Little to no heat when broiling

It was an awkward position replacement job, but with a little help it is working well Read more

Guessed it must be either a heat sensor or a lower element. Bosch wall oven with no easy access to the back of the stove. Had to remove the door (very Heavy) to more easily access the temperature sensor. I thought from a video that the sensor could be easily replaced without having to access the red of the stove - not true! The sensor wire was secured to other wires and a clip screwed into the sheet metal. I was able to remove all screws with a Torx head driver. Since I had to pull the unit out... Read more

Replaced Read more

• Won't start

The hardest part was sliding the appliance out of the wall and removing the microwave oven casing to access the internals. When the internals were accessible, a multi-meter was used to confirm that the fuse was actually blown (this was the first assumption when power was lost to the unit). Then checked each side of the fuse bracket to make sure that we were not going to ground on either side. Both sides checked out. Inserted the new fuse, restored power at the breaker box and tested the oven... Read more

Replaced the oven bake element and the sensor. I don’t think that the sensor was faulty, but replaced anyway. The replacement was fairly easy, but there are 2 clips that hold the element and the element’s front crossbar will snag on the clip that holds the rear cross member. To solve this and prevent the rear clip grabbing the front cross member, used a saw as a guide to cover the rear clip and act as a ramp for the element. Once the front cross member has passed the rear clip, the saw can... Read more

• Noisy
• No heat

Replaced the Magnetron Read more