Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker overflowing or won't stop making ice? This shut-off arm senses ice levels to control production. Simple DIY fix in under an hour.
Purchased Appliance Parts Pros replacement ice maker, removed the defective unit, matched the proper wiring harness using the wiring color codes at the P and J side connectors. Approximately 1 hour following the installation, I delightfully heard the first set of cubes ! Read more
Front grille covers the lower front of your refrigerator, providing a finished look and guiding airflow. Replace if cracked, broken, or missing tabs.
Very easy.Just set right in Read more
Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly. Read more
Supports and guides the deli drawer in your refrigerator's fresh food section. Replace if worn, broken, or causing drawer sticking, sagging, or derailment.
Watched the repair videos on appliances parts pro & followed the video instructions. Read more
Right-side crisper cover support mounts to the inner wall and holds up the crisper cover and glass. Replace if cracked, broken, or missing to restore level.
This hex washer-head screw secures panels, brackets, and other components inside your appliance. Replacing a worn, stripped, or missing screw restores a tight fit, reduces vibration and rattles, and helps keep assemblies properly aligned.
A friends family had left her refrigerator out on a porch while they were remodeling the house she was supposed to move into. A wind storm blew the refrigerator off the porch and tore the door off. It wasn't dented at all, but when her son pu the door back on, it wouldn't seal. She asked for some help fixing it. I ordered replacement parts for the upper and lower hinge. The parts arrived quickly. I unscrewed the top hinge which was slightly bent. Set the door on its side and replaced the bent... Read more
Freezer running too warm or too cold? This thermistor cover shields the temperature sensor for accurate cooling. Simple snap-in installation fixes misreads.
I am not a plumber, but very good with anything mechanical. I uninstalled the broken icemaker, swapped the wiring and ice bar from the old icemaker to the new one, and installed the new icemaker all in 12 minutes and 37 seconds from start to finish, which includes pulling out the two freezer baskets and pulling off the freezer door. This repair could not have been any simpler. Great product! Read more
Rear roller that helps move your refrigerator smoothly. Replace if broken, cracked, or wobbling to restore easy mobility. Confirm fit by model number.
Removed all the food from the freezer and most from the fridge before starting. Tipped fridge back until I could place a 2 x 4 a couple of inches behind the front rollers. With the front of the fridge now approximately 3 to 4" off the ground you can remove the adjusting bolt and the roller assembly can be pulled out of the brackets. Slide out of the notches where that hold it into the bracket. Same to install. Read more
The Housing is an OEM part for Whirlpool refrigerators. The housing provides a secure enclosure for the door switch and light bulb. The door switch is responsible for detecting when the refrigerator door is opened or closed, allowing the light bulb to
Routes water between internal components in your refrigerator. Replace if tube is cracked, brittle, kinked, or leaking to restore proper water flow.
Replaced water line to ice maker and installed redesigned p trap drain. I watched the installation videos and my wife and I easily completed this project. One thing that I want to add for others. When the ice maker supply was leaking, it filled the funnel in the ice maker with an ice block. I had to remove the ice maker(which is pretty easy) and defrost the ice block before reinstalling the supply line. If I had not, the water would have poured into the ice bin. Read more
Fix frozen food or warm spots in your fridge with this electronic air damper control. Regulates airflow between freezer and fresh food compartments.
Freezer not cooling or ice maker stopped working? This evaporator fan motor restores cold air circulation when the original hums, won't spin, or fails.
Looked at u tube videos & information on the internet. replaced evaporator motor problem solved Read more
Protective seal grommet for hoses, tubes, or wires passing through refrigerator cabinet. Replaces cracked, worn, or missing grommets to prevent leaks.
Connects two sections of water tubing in your refrigerator's supply system. Replace if cracked, leaking, or broken during door removal or transport.
Mounts the water filter base to the refrigerator cabinet. Replace this bracket if cracked, broken, or missing to keep the filter housing secure and aligned.
Video after video on how to replace cover, none to show how to replace entire compartment, had to figure it out myself. Read more
This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation. Do-It-Yourself Stories from Customers like You My grandson broke my rail mulln opeining and closing the refrigerator door Bobby B. • Fort Walton Beach , FL • January 21, 2015 I ordered the part from you which arrived much sooner than expected. I replaced the Rail-Mulln. It was so easy to fix, next time I'll let my wife do it. Read more
I ordered the part from you which arrived much sooner than expected. I replaced the Rail-Mulln. It was so easy to fix, next time I'll let my wife do it. Read more