Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix water leaking under your refrigerator with a new drip pan. Catches defrost water to prevent puddles and floor damage. Moderate DIY repair.
Ordered a new drip pan and drain tube and watched your extremely helpful video on replacing them. Read more
This refrigerator door flipper mullion is the folding center rail that bridges the gap between the doors. It helps complete the door seal and reduces condensation along the center for better temperature retention.
I ordered the part from you which arrived much sooner than expected. I replaced the Rail-Mulln. It was so easy to fix, next time I'll let my wife do it. Read more
Black drip tray that sits under your refrigerator's ice and water dispenser. Replaces cracked, warped, or missing trays. Pulls straight out for cleaning.
The tray just sits in a slot on the door so no tools required Read more
Ice maker overflowing or not stopping? This shut-off arm extension clips onto the bail arm to help the bin detect when full. Simple 5-minute fix.
Purchased Appliance Parts Pros replacement ice maker, removed the defective unit, matched the proper wiring harness using the wiring color codes at the P and J side connectors. Approximately 1 hour following the installation, I delightfully heard the first set of cubes ! Read more
The Shaft is an OEM part for Whirlpool refrigerators. This component serves as the axle for the refrigerator's wheels, allowing for smooth movement when repositioning or cleaning the appliance. It is designed to fit securely and ensure stability during use. The shaft's approximate length is 26 inches.
Common causes of a bad wheel shaft include excessive weight, rough handling during relocation, or wear and tear over time.
Symptoms of a bad wheel shaft include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Put the new parts I bought from you on and made some fixing on the rails and done? Great part and fast shipping, thanks Read more
This is the glass insert for the crisper cover in your refrigerator. It sits above the crisper drawers to provide a sturdy shelf surface and help seal the drawers, restoring safe, usable storage when the original glass is damaged.
I ordered the replacement glass shelf. Read more
Covers the lower front area of your refrigerator. Replace if cracked, broken, or missing to restore a clean appearance and protect internal components.
Checked on line Appliance Parts Pro and found the correct part, called to confirm that I had the right part and ordered. It was here in four days. Read more
Clear plastic chiller door for bottom-mount refrigerators. Replaces cracked, broken, or missing chiller compartment doors. Snaps into place, no tools needed.
I have a Maytag MFI2568AES refrigerator. The ice maker quit working for no reason. I ordered the ice maker replacement parts from AppliancePartsPros.com. The kit came within 2 days. I spent about 20 minutes getting the kit installed and after a few hours we had ice. Read more
This acoustic fiber is the sound-absorbing insulation used in a refrigerator's machine compartment. Replacing a missing or damaged pad reduces operating noise from the compressor area and helps maintain the unit's intended sound levels.
First I emptied and cleaned out the entire refrigerator. Then I unplugged and defrosted the unit. As that was happening, I vacuumed out the back compressor area. ( the noise reduction pad disintegrated so replaced) , Googled the problem, and watched a youtube video on how to test and fix the issue. Took the back of the inside freezer compartment off and metered the heating coil. It was good. Then popped off the control panel cover in the fridge compartment and tested the motherboard. ... Read more
Replace your refrigerator's left door gasket to restore the airtight seal and maintain proper temperatures. Prevents cold air loss and frost buildup.
Pulled out old parts, and swapped with new. New seals needed to be warmed up with a hair dryer to get wrinkles out from shipping, but that was simple as well. With my fridge, there was also a secondary piece on the door which needed to be removed with a screw. Took some extra time to give all those surfaces on the fridge a much needed cleaning while the seals were off. New seals fit perfectly and the replacement was simple- video provided on the website was also helpful. Read more
Refrigerator not cooling or freezer too warm? A damaged evaporator fan blade stops cold air circulation. This replacement restores airflow. Video guide included.
Evaporator fan was loud and eventually quit. This allowed the freezer temp to rise above 18 deg. which they activated the PF code. Replacing the evaporator fan motor fixed the problems. Read more
*** Note: Sold individually ***
Connects the dispenser motor to the ice bucket auger. Replace if stripped, worn, or broken to restore proper torque transfer and smooth ice dispensing.
Removed drip pan from ice dispenser. Removed two screws hidden behind drip pan to loosen bezel at bottom. Carefully lifted bezel off top hook to expose controller board cabling. Disconnected three connectors to control board behind bezel to remove bezel completely. Removed two (possibly three) screws to access the back of the ice chute mechanism. Removed broken paddle that just snaps in, being careful to capture paddle spring. Put paddle spring on new paddle and maneuvered spring-end... Read more
Front grille for refrigerators. Installs at the bottom front to allow ventilation while protecting components. Replace if cracked, broken, or missing.
Ordered a Front Grille and Center Crisper Rail. Read more
Color: Stainless.
Put the new handle on and works fine now Read more
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more