Mim-D00a Parts

• Noisy
• Fridge runs too long
• Fridge too warm
• Freezer section too warm

Unplugged refrigerator and removed access panel from back of fridge. Have had this panel off many times for dust removal. Panel is a cheap piece of glorified cardboard on this Whirlpool model, which is a shame given that it was a $1000 refrigerator. Fan motor is mounted on stamped sheet metal bracket which I removed from cabinet with old fan attached to it. Metal bracket held in place by 4 1/4 inch hex head sheet metal screws. Two outermost screws can be removed with nut driver but access to... Read more

I ordered a new bin thermistor. Took care of the problem right away. Read more

• Light not working

We had delayed repairing the problem because we received a price of more than $ 100 from a local appliance repairman. However, after viewing the view on the ApplianceParts Pro website, I saw what an easy repair it would be. After receiving the part from you, I had my son do the repair because I felt it would a good father - son bonding time. It was so easy and he was proud of his ability. Thanks for your excellent repair video and the excellent price. It costs less than $ 22 instead of more... Read more

Touch up paint Read more

Replaced It With New One Read more

• Not dispensing water
• Ice maker not making ice
• Leaking

A piece of cake. Video was spot on. Finish less than 45 min. Read more

Order a new bin thermostat and replaced the old one and it seems to be working fine. Thanks Read more

New water tray to fix the crack in the housing holding lower pump. Removed ice cutter, ice scoop holder, ice freeze plate water drain, water fill tube and cover over main water pump. With a nut driver and taking my time had everything removed, cleaned and reinstalled in less than 60 mins. Easy repair and saved a bundle on a service call. All my parts arrived well packed and in three days. I have used this supplier several times before and I give the five stars. Read more

My husband (TACLB12654C) took the machine apart and found the recirculating pump would not run. The electrical receptacles inside the machine had corroded to the point that it took two days soaking in vinegar water to loosen them. He gave the entire machine a good cleaning, reassembled it, installed the new pump, and turned the little ice making machine into an operational device. Since this belonged to one of our best friends, our friend is now a happy camper. Read more

I removed the defective valve and ordered an exact replacement from AppliancePartsPros.com. The new valve arrived in less than 2 days and fit perfectly. I was able to repair the ice machine in a matter of minutes and it appears to be working perfectly. Read more

New water tray to fix the crack in the housing holding lower pump. Removed ice cutter, ice scoop holder, ice freeze plate water drain, water fill tube and cover over main water pump. With a nut driver and taking my time had everything removed, cleaned and reinstalled in less than 60 mins. Easy repair and saved a bundle on a service call. All my parts arrived well packed and in three days. I have used this supplier several times before and I give the five stars. Read more

I replaced the control board after making sure the cutter grid was OK. Read more

Seal and adhesive. Read more

I unplugged the unit and removed the pump and ice scoop holder. After those items were out of the way I removed the broken tray and reinstalled the new one. Read more

There are plenty of DIY youtube videos to show you how to replace the parts. I went ahead and replaced more than just the broken parts. I figured if I had the machine opened up, I might as well replace parts that could go out in the future. I might have gone a bit too far with all the other parts. The only part that was really broken was the wiring harness. Two of the wires had corroded from the sockets and there was no other way than to replace the entire harness. Its a bit tricky to feed... Read more

This tube is very difficult to work with due to its location behind the cold plate. I loosened the two screws on the left, but there's no way to get the screws on the left loose. I cut the hose off of the pipe at the top of the cold plate and slowly worked it out. The new tube comes folded in half, putting a bad crimp in the middle. The easiest way to get rid of the crimp is to pour boiling hot water onto the crimped area and then open up the tube. I didn't do it, but you might want to... Read more