Igal E Memphis , TN January 01, 2017 Appliance: KitchenAid Ice Cube Maker KUIC15NRXS1 The ice maker was making very small ice cubes with a cloudy appearance There are plenty of DIY youtube videos to show you how to replace the parts. I went ahead and replaced more than just the broken parts. I figured if I had the machine opened up, I might as well replace parts that could go out in the future. I might have gone a bit too far with all the other parts. The only part that was really broken was the wiring harness. Two of the wires had corroded from the sockets and there was no other way than to replace the entire harness. Its a bit tricky to feed the harness through the back of the machine. You just need to slowly feed it through. The rest of the parts are plug and play. Read More... 12 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Adjustable Wrench, Nut Drivers, Pliers, Screwdrivers, Socket Set, Wrench Set
Robert S Omaha , NE April 03, 2015 Appliance: Model KUIS18PNXW O My kuis18pnxw o was not producing ice i dug in and found grid cutter was bad it was due for a cleaning anyway i continued taking it apart and found a wire had corroded and broke free of sensor After reading some reviews it was clear to me I wasn't going to mess around with rewiring the grid so I ordered it complete along with the sensor. Install was easy as the parts were identical. Read More... 7 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers
David W Canyon Lake , TX April 08, 2015 My ice maker quit making ice I found out the cutting grid had a broken wire. I took it out cleaned the machine really good and found I could purchase a new grid from AppliancePartsPros.com. The part wad delivered in a couple of days so I slid it in and stared the ice maker. Low and behold it fixed the problem and I have plenty of ice. now. Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Socket Set
Lana R Bronte , TX February 23, 2015 Appliance: Model KUI15 Cutter grid broke Ordered another cutter grid and replaced it and it is working like a charm! Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Laura A Sherman Oaks , CA November 14, 2015 Icamaker not making ice I could see that the cutter grid wire was broken, so I ordered a new cutter grid. The repairman couldn't come, so I took out the old one (4 screws and one connection plug) and installed the new one. Voila! It worked! Yay me! Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Socket Set