Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Molded housing that shields the infrared emitter in your refrigerator's ice level optics system. Replace if cracked, broken, or missing to protect the board.
Your video was perfect without it I would of never been able to repair my ice maker Read more
Cabinet screw secures panels, brackets, and ducts inside your refrigerator. Replace missing, stripped, or loose screws to eliminate rattling and gaps.
The problem was that the motor coupler & shaft had a tiny bit of rust at their union. With the weight of the ice bin it rusted in the lowest position. This didn't allow the motor coupler to float on the shaft. There is a spring inside the shaft that pushes up on the motor coupler keeping it engaged in the ice bin coupler above. This coupler in turn rotates the auger in the bin to dispense the ice. I removed the motor coupler & shaft, tapped the coupler loose and filed off the rust. This allowed... Read more
Plain washer distributes load under fasteners in refrigerator assemblies. Replace when worn or missing to secure brackets, hinges, and mounts. Verify fit.
My LG electric dryer stopped drying the other day and I searched on line for suggestions on what may have caused it to stop working. I came across AppliancePartsPros.com and quickly found some of the most common issues with my LG dryer. The problems were listed in the order of most common occurrence, and had extremely helpful and detailed instructions on how to not only diagnose the problem, they also showed exactly how to access and repair the issue. Unfortunately, it was late on a Thursday... Read more
Replacement door vent directs humid air out during the dry cycle. Install inside the door panel to replace a cracked, clogged, or missing vent.
Found AppliancePartsPros.com and looked up parts and ordered replacement parts. ( VERY easy!) Replaced the spray arm assembly and door vent via the handy Q&A repair section, as well as a thorough cleaning, and VOILA! Clean dishes again!! Thanks for making it easy! Read more
Metal contact leaf for dishwasher switch assemblies. Replace if the original contact is bent, corroded, worn, or missing to restore proper circuit closure.
Ice cubes jamming or not ejecting? A broken ice stripper prevents proper cube release. DIY fix in 15-20 minutes with basic tools and video guide.
Simply replaced the broken ice stripper with a new one. Read more
Fix leaks around the vent cover with this dishwasher mounting screw. Secures the vent assembly and internal components to prevent water leakage. Quick fix.
The 4 screws that hold the vent cover in place also hold the assembly inside the door that has the heater motor and other items. The four screws go through the assembly inside the door, through the door and into 4 plastic legs on the vent cover. Two of the legs on the vent cover were broken and therefore the vent cover and the assembly inside the door were not being held tight against the door. The water was leaking in that area. Read more
If your dishes have spots or dry poorly, the rinse aid dispenser may be clogged or leaking. This tank assembly restores proper rinse aid delivery.
Ordered new parts and put them in! Read more
Plastic housing that secures the drain solenoid to the pump assembly. Replace if cracked, broken, or missing to properly position the solenoid mechanism.
Viewed you video on Youtube.com and saw how easy it was to change out the triple water valve. Job completed and working like a charm now. Read more
Replace your refrigerator's decorative handle trim panel when cracked, chipped, faded, or missing. Covers handle mounting area for a clean finish.
Just removed the broken items and replaced new ones all in under five minutes. Read more
Fridge making clicking sounds and not cooling? A faulty compressor start device causes repeated clicks and cooling failure. Simple DIY repair.
I did some research online to pinpoint what the clicking noise was - discovered it was the relay switch. Very simple repair - after I removed the back panel on fridge I located the relay mounted on side of the compressor. It came off easily. Ordered my part at 4pm and it was delivered to me by 11am the next day. Installed the new relay, plugged the fridge back in and BINGO - it worked :). Super simple to do - anyone could fix this issue on their fridge. Read more
Fixes ice dispenser not dispensing or auger not turning. This motor assembly drives the auger shaft that moves ice from bin to chute. Moderate difficulty.
Replaced the motor, however not the easiest to do with the older refrigerators. First I had to remove the shelf that hold the ice bin. There is a small screw midway underneath the tray. Once removed the shelf is loose but still hard to remove. There is a side panel that is slotted andonce removed the shelf can then be removed, but not knowing that it is a very odd fitting unit. Then comes the unplugging which cannot be seen so it is all by feel. Once the shelf drops down the plug is now... Read more
Secures the soap dispenser lever assembly in your dishwasher. Replace if screw is missing, stripped, or damaged during dispenser repair or maintenance.
Loose or wobbly refrigerator handle? This keyhole clip secures the handle shaft to eliminate wobble and restore a solid grip. Easy DIY fix with a nut driver.
The new clip we ordered Read more
Mounts in the dispenser to secure the ice housing assembly. Keeps the chute and door aligned for smooth dispensing. Replace if cracked, broken, or worn.
Replaced the ice tray and motor mount plate. While I was there I replaced the thermostat also. New parts arrived in a day and a half. Read more
Black plastic button that covers the water filter release lever in the toe panel. Replace if cracked, broken, or missing from filter housing assembly.
I had the water filter holder replaced to fix the problem with the water for the door and the ice maker. The holder did not come with the cover for the release button for the filter. I ordered a replacement cover (Button) for the filter release. The cover fits over the release lever and was easily snapped onto the lever. It took more time to unpack the button from the packaging then it did to install it onto the filter housing. I don't understand why this part wasn't included with the new... Read more