Msd2456geq - Maytag Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489478
Size: 8 x 1/2 ab.
Do-It-Yourself Stories from Customers like You
Wanted to update wood paneled compactor Julie S. • San Antonio , TX • December 09, 2014
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627018
Size: 1/4 inch. Nut for plastic water line.
Do-It-Yourself Stories from Customers like You
Broken y connector off of water valve on amana refridgerator Greg S. • El Dorado Hills , CA • October 19, 2014
Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks.
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 61004388
This ice door spring restores the closing tension on the dispenser chute door. Replacing a fatigued spring helps the flap seal properly after dispensing, reducing warm-air leaks that cause frost buildup and ice clumping around the chute. What it does:
- Provides return tension so the ice chute door closes after dispensing
- Helps maintain a tight seal to limit frost, condensation, and air leaks
- Can resolve a chute door that sticks open/closed or won't fully close
- Reduce rattling or poor ice flow caused by a loose flapper
What's included:
Install notes:
- Disconnect power to the refrigerator before servicing
- Remove dispenser trim/control panel to access the ice door assembly
- Note spring orientation on the flapper; transfer/install carefully without over-bending
- Smooth flap movement and a proper seal before reassembly
Also known as:
- Dispenser door spring
- Flapper spring
- Ice chute door spring
This part fixes the following symptoms
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
The ice door would not close all the way and would allow air to go up to the ice storage compartment this would cause a frosty build up which interfered with getting ice to come down the shute Thomas C. • Iowa , LA • August 29, 2015
We ordered the Ice Door Fountain Kit and ice door spring, which was delivered to our home within three or four days. I understood everything about how to change it except the placement of the
spring. A video on your website showed exactly how to put the spring in place and helped me get the job done quickly. It solved our problem and we really appreciate your services.
Read more
More
$11.95
- Compare At:
-
$13.11
- You Save:
-
$1.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WPB5705307
Ice maker water line: 1/4x 8ft.
Do-It-Yourself Stories from Customers like You
Water leak and broken parts inside refrigerator Todd B. • Indianapolis , IN • August 28, 2017
Replaced the broken parts. The water leak was caused by the drain valve not directed into drain pan
Read more
More
$16.95
- Compare At:
-
$20.00
- You Save:
-
$3.05
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001892
Water inlet valve kit replaces older valves that used the "Y" type water lines.
Do-It-Yourself Stories from Customers like You
Hollow nice cubes/no cubes Mike P. • Des Moines , WA • June 25, 2014
I replaced the dual outlet valve which did not fix it then i replaced the inlet valve which fixed it
Read more
More
$112.44
- Compare At:
-
$133.80
- You Save:
-
$21.36
Genuine Whirlpool part
By: Whirlpool
Part Number: 61003647
This refrigerator door closer restores smooth, positive door action. When worn, the door can click, bind, or swing open. Replacing it helps the door seal properly to maintain temperatures and limit frost or moisture.
- Provides cam action at the bottom hinge for smooth opening and a positive close
- Helps pull the door shut during the last inches of travel to maintain gasket contact
- Typical wear symptoms: popping/clicking at the lower hinge, door that won't stay closed, or poor sealing
- Visual clues include flat spots, grooves, or cracks on the cam surface
What's included: 1 door closer. Install notes:
- Disconnect power and remove items from the door for safety and to reduce weight
- Lift the door off the bottom hinge; transfer/install the closer in the same orientation as the original
- Reassemble, then verify the door self-closes and the gasket seals evenly
- Use care not to pinch or distort the door gasket during reinstallation
Do-It-Yourself Stories from Customers like You
Door not closing properly Dan T. • Boring , OR • January 03, 2015
Watched the video at Appliance Parts Pros. Followed the video. I was fixing the refrigerator door (a little easier then the freezer door). The repair was very simple and took less then 15 minutes.
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 61005614
This ice enclosure is the molded housing for the refrigerator's ice compartment. It supports and protects the ice dispensing components and guides ice into the chute or bin, helping maintain proper alignment and smooth dispensing. What it does:
- Provides structural support for the ice bucket/auger and related dispenser components
- Helps guide ice from the compartment into the chute/bin to reduce spills and jams
- Aids in maintaining alignment and a consistent cold zone around the ice area
- Typical symptoms of failure: cracked/broken housing, ice bin won't seat securely, ice jams or intermittent dispensing, frost/ice buildup in the ice compartment
What's included:
Install notes:
- Disconnect power; remove the ice bin before service
- Note screw locations; detach the old enclosure and any connected clips or wiring
- Transfer any brackets or hardware from the original enclosure; reuse existing fasteners
- Mount the new enclosure without overtightening; restore power and verify normal dispensing
This part fixes the following symptoms
-
Ice maker won't dispense ice
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
The motor mounting area at the rear of the ice tray enclosure had cracked and broken out and the ice auger would not work Jeffrey C. • Clovis , CA • June 11, 2016
Removed the broken ice enclosure tray, disconnecting and removing the motor and cube/crushed ice selector mechanism. Mounted the motor and selector mechanism to the rear of the new ice tray enclosure and installed the enclosure to the freezer compartment walls.
Read more
More
$131.95
- Compare At:
-
$155.70
- You Save:
-
$23.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281196
The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly.
Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption.
Symptoms of a bad screw include:
- The refrigerator door seems misaligned or does not close properly.
- Increased effort needed to open or close the door.
- Unusual gaps around the door seal when closed.
- The door might squeak or make other noises during operation.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing a hinge and hinge cover. James H. • Killeen , TX • August 01, 2020
As soon as the parts arrived, installed them seamlessly. Thank you.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10143759
Do-It-Yourself Stories from Customers like You
Failed to cool due to hole/s in evaporator leaking freon Gerald L. • Myrtle Beach , SC • August 17, 2017
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly.
Read more
More
$28.23
- Compare At:
-
$33.59
- You Save:
-
$5.36
Genuine Whirlpool part
By: Whirlpool
Part Number: W10887190
This replacement light bulb restores clear, reliable illumination so you can see contents and monitor appliance operation. Replace a burned-out, dim, or flickering bulb to bring visibility back to the area it lights. What it does:
- Provides illumination in the appliance's interior or designated lighting location
- Makes it easier to see contents and check status at a glance
- Common symptoms: light won't turn on, intermittent/flickering light, dim or blackened bulb
What's included:
Install notes:
- Disconnect power before servicing; allow hot surfaces and the old bulb to cool completely
- Remove any lens/cover, then remove the old bulb
- Install the new bulb securely without overtightening; reinstall the lens/cover if present
- Restore power and test operation
Do-It-Yourself Stories from Customers like You
Lights burned out! M Dawn F. • Lafayette , LA • December 03, 2016
Let there be light! Easy change out and what a difference light makes! I had waited so long I got used to the fridge having only the top light and after changing out the bulbs -- well it is so good to see what is in the back of the fridge again! Just remove the plastic protector, easy as pie to do, and unscrew the bulbs and replace them!
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Broken handle foot pedal and missing parts Donald M. • Lake Arrowhead , CA • April 05, 2015
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy!
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: 67006425
This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.
- Provides the correct fastener for locations identified in your model's parts diagram
- Helps prevent looseness, vibration, and rattling of panels or brackets
- Replace if the head is stripped, threads are worn, or the screw is missing
- Symptoms can include loose parts, gaps, or noises from movement
What's included: One screw Install notes:
- Unplug the refrigerator and shut off water if working near the ice maker or dispenser
- Match length and type to the original; follow your model's parts diagram for placement
- Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
- Keep track of screw positions; do not mix different screw lengths or styles
Do-It-Yourself Stories from Customers like You
My grandson broke my rail mulln opeining and closing the refrigerator door Bobby B. • Fort Walton Beach , FL • January 21, 2015
I ordered the part from you which arrived much sooner than expected. I replaced the Rail-Mulln.
It was so easy to fix, next time I'll let my wife do it.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP61002307
The Dishwasher Rack Roller is an OEM part for Whirlpool dishwashers. It is designed to facilitate the smooth movement of the dishwasher rack in and out of the appliance. This roller ensures that loading and unloading dishes is easy and efficient, allowing the rack to glide effortlessly along the tracks.
Over time, dishwasher rack rollers can wear out or become damaged due to frequent use or accidental mishandling. Causes of a bad roller include general wear and tear, buildup of debris, or impact damage.
Symptoms of a bad roller include:
- Difficulty sliding the rack in or out
- The rack becoming stuck or jammed
- Uneven movement of the rack
- Excessive noise when moving the rack
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Rollers broke off the drawer glides in my refrigerator so drawer would fall out when extended John M. • New Haven , VT • November 24, 2017
Popping the old draw glides off was the toughest part of the job, ad even that was fairly easy, once I noticed the little retaining tabs near the front of the drawer. Pushed in on the tabs, while pushing back on the drawer glide rail and it popped right off.
One minor problem I did note: When the rollers were installed on the shoulder screws, they would not turn. One roller just had a burr around the inside edge of the hole. The other the entire bore was a bit undersized, creating a snug fit....
Read more
More
$10.95
- Compare At:
-
$12.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP68233-2
The defrost timer controls your refrigerator's automatic defrost cycle, periodically pausing cooling to power the defrost heater. Replacing a faulty timer restores proper defrosting to help prevent frost buildup, temperature swings, and excessive run time.
- Advances the system between cooling and defrost at set intervals
- Sends power to the defrost heater, then returns the unit to cooling
- Failure may cause heavy frost on evaporator coils and weak airflow
- Fresh food section may run warm while the freezer ices over
- Unit may run constantly, never defrost, or get stuck in defrost
What's included: 1 defrost timer Installation notes:
- Disconnect power before servicing
- Location varies by model; access the timer (often in the control housing or rear compartment), note wire positions, and transfer one at a time
- Mount and secure the timer as originally installed; reuse existing bracket/fasteners
- After reassembly, restore power and verify the unit advances through cooling and defrost
Do-It-Yourself Stories from Customers like You
The refrigerator section was not staying cold as before and the noise was louder than normal Stephen S. • Flagstaff , AZ • July 11, 2015
At first, I suspected the evaporator fan motor was going bad, but when I went in to check it out, I found the evaporator coils totally frozen up; the fan was cavitating. I defrosted the coils completely and checked everything out. By process of elimination the Defrost timer had to be the culprit. I unplugged the timer and sure enough, the motor winding was open. Replacing the defrost timer fixed my problem. Troubleshooting (using the information available on your web site) took a little...
Read more
More
$112.35
- Compare At:
-
$133.70
- You Save:
-
$21.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10169124
This grommet is a small protective seal used where a hose, tube, wire, or component passes through or mounts to the appliance cabinet. It cushions the connection and helps prevent leaks, vibration, and wear for reliable operation.
- Provides a snug barrier between parts and metal openings to protect hoses, tubes, and wiring
- Helps seal against moisture to reduce seepage
- Dampens vibration and rattling noises
- Replace if cracked, hardened, missing, or no longer stays seated; symptoms may include drips at a pass-through, buzzing/rattling, or a loose fit
What's included: 1 grommet
- Disconnect power; shut off water supply if applicable
- Access the grommet location and note orientation/routing
- Remove the old grommet and clean the opening
- Press the new grommet fully into place; reassemble and test for leaks/noise
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19