Msd2756dew Maytag Refrigerator Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10348409
This factory screw secures appliance components. It restores a tight, reliable hold when the original hardware is stripped, missing, or corroded—helping prevent vibration and keeping panels and brackets properly aligned.
- Provides threaded fastening for panels, brackets, covers, or internal components
- Replaces worn, rusted, stripped, or missing hardware
- Helps reduce vibration and rattling from loose parts
- Restores proper alignment and a secure fit of attached parts
What's included: Includes 1 screw. Installation notes:
- Disconnect power; turn off water supply before service
- Note original screw location and retain any spacers or clips for reassembly
- Start threads by hand to avoid cross-threading
- Tighten snugly; do not overtighten to prevent stripping
Do-It-Yourself Stories from Customers like You
Dishwasher would not start Mark M. • Midlothian , VA • July 16, 2016
Maytag Dishwasher (about 5 years old). Some of the buttons had stopped functioning. Then the Start button began choosing whether or not to work. Eventually it would not start at all. Upon removing the control panel, the first thing I noticed was that the brackets that hold the two lower screws were broken. (So this was the reason that the door was so hard to open from the time it was new.) I trouble shot the thermal fuse, the door-latch switches, and inspected the control board trying to find...
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489478
Size: 8 x 1/2 ab.
Do-It-Yourself Stories from Customers like You
Wanted to update wood paneled compactor Julie S. • San Antonio , TX • December 09, 2014
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627018
Size: 1/4 inch. Nut for plastic water line.
Do-It-Yourself Stories from Customers like You
Broken y connector off of water valve on amana refridgerator Greg S. • El Dorado Hills , CA • October 19, 2014
Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks.
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 61004388
This ice door spring restores the closing tension on the dispenser chute door. Replacing a fatigued spring helps the flap seal properly after dispensing, reducing warm-air leaks that cause frost buildup and ice clumping around the chute. What it does:
- Provides return tension so the ice chute door closes after dispensing
- Helps maintain a tight seal to limit frost, condensation, and air leaks
- Can resolve a chute door that sticks open/closed or won't fully close
- Reduce rattling or poor ice flow caused by a loose flapper
What's included:
Install notes:
- Disconnect power to the refrigerator before servicing
- Remove dispenser trim/control panel to access the ice door assembly
- Note spring orientation on the flapper; transfer/install carefully without over-bending
- Smooth flap movement and a proper seal before reassembly
Also known as:
- Dispenser door spring
- Flapper spring
- Ice chute door spring
This part fixes the following symptoms
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
The ice door would not close all the way and would allow air to go up to the ice storage compartment this would cause a frosty build up which interfered with getting ice to come down the shute Thomas C. • Iowa , LA • August 29, 2015
We ordered the Ice Door Fountain Kit and ice door spring, which was delivered to our home within three or four days. I understood everything about how to change it except the placement of the
spring. A video on your website showed exactly how to put the spring in place and helped me get the job done quickly. It solved our problem and we really appreciate your services.
Read more
More
$11.95
- Compare At:
-
$13.11
- You Save:
-
$1.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WPB5705307
Ice maker water line: 1/4x 8ft.
Do-It-Yourself Stories from Customers like You
Water leak and broken parts inside refrigerator Todd B. • Indianapolis , IN • August 28, 2017
Replaced the broken parts. The water leak was caused by the drain valve not directed into drain pan
Read more
More
$16.95
- Compare At:
-
$20.00
- You Save:
-
$3.05
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001892
Water inlet valve kit replaces older valves that used the "Y" type water lines.
Do-It-Yourself Stories from Customers like You
Hollow nice cubes/no cubes Mike P. • Des Moines , WA • June 25, 2014
I replaced the dual outlet valve which did not fix it then i replaced the inlet valve which fixed it
Read more
More
$112.44
- Compare At:
-
$133.80
- You Save:
-
$21.36
Genuine Whirlpool part
By: Whirlpool
Part Number: 61003647
This refrigerator door closer restores smooth, positive door action. When worn, the door can click, bind, or swing open. Replacing it helps the door seal properly to maintain temperatures and limit frost or moisture.
- Provides cam action at the bottom hinge for smooth opening and a positive close
- Helps pull the door shut during the last inches of travel to maintain gasket contact
- Typical wear symptoms: popping/clicking at the lower hinge, door that won't stay closed, or poor sealing
- Visual clues include flat spots, grooves, or cracks on the cam surface
What's included: 1 door closer. Install notes:
- Disconnect power and remove items from the door for safety and to reduce weight
- Lift the door off the bottom hinge; transfer/install the closer in the same orientation as the original
- Reassemble, then verify the door self-closes and the gasket seals evenly
- Use care not to pinch or distort the door gasket during reinstallation
Do-It-Yourself Stories from Customers like You
Door not closing properly Dan T. • Boring , OR • January 03, 2015
Watched the video at Appliance Parts Pros. Followed the video. I was fixing the refrigerator door (a little easier then the freezer door). The repair was very simple and took less then 15 minutes.
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281196
The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly.
Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption.
Symptoms of a bad screw include:
- The refrigerator door seems misaligned or does not close properly.
- Increased effort needed to open or close the door.
- Unusual gaps around the door seal when closed.
- The door might squeak or make other noises during operation.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing a hinge and hinge cover. James H. • Killeen , TX • August 01, 2020
As soon as the parts arrived, installed them seamlessly. Thank you.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10143759
Do-It-Yourself Stories from Customers like You
Failed to cool due to hole/s in evaporator leaking freon Gerald L. • Myrtle Beach , SC • August 17, 2017
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly.
Read more
More
$28.23
- Compare At:
-
$33.59
- You Save:
-
$5.36
Genuine Whirlpool part
By: Whirlpool
Part Number: W10887190
This replacement light bulb restores clear, reliable illumination so you can see contents and monitor appliance operation. Replace a burned-out, dim, or flickering bulb to bring visibility back to the area it lights. What it does:
- Provides illumination in the appliance's interior or designated lighting location
- Makes it easier to see contents and check status at a glance
- Common symptoms: light won't turn on, intermittent/flickering light, dim or blackened bulb
What's included:
Install notes:
- Disconnect power before servicing; allow hot surfaces and the old bulb to cool completely
- Remove any lens/cover, then remove the old bulb
- Install the new bulb securely without overtightening; reinstall the lens/cover if present
- Restore power and test operation
Do-It-Yourself Stories from Customers like You
Light bulb out in fridge. William B. • Meridian , MS • September 13, 2020
Ordered new bulb from APPros.
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Broken handle foot pedal and missing parts Donald M. • Lake Arrowhead , CA • April 05, 2015
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy!
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: 61005625
This ice enclosure is the molded housing for the refrigerator's ice path. It supports and aligns related components so ice moves properly and helps keep warm air out to reduce frost and moisture around the ice area.
- Provides a rigid mounting point for ice-path components to keep alignment and flow
- Helps maintain an air barrier to minimize frost, sweating, and ice clumping
- Replace if the original housing is cracked, warped, or broken
- Common symptoms include frost or condensation near the ice opening, ice clumps, or poor/jammed ice dispensing
What's included: One ice enclosure
- Disconnect power and shut off water before servicing
- Access the ice area (door or interior access varies by model); retain screws and clips for re-use
- Transfer any guides, seals, or switches from the original enclosure to the new part in the same orientation
- Reassemble, restore power, and check for smooth operation and a good seal
Do-It-Yourself Stories from Customers like You
Cracked plastic ice maker tray shelf David L. • Pittsford , NY • January 22, 2016
Upon receipt of part (in 2 days), removed right panel (snapped on). Removed ice tray. Removed one screw holding broken tray. Then removed plug from motor/solenoid.
Next, moved motor/solenoid from old cracked tray to new one. All holes aligned exactly.
Replaced shelf/motor in freezer, and reconnected cable from motor to freezer wall. Put one screw back in. Then replaced right-side snap-in panel. Finally, slid in ice-tray itself onto the new shelf. Tested okay.
Read more
More
$142.35
- Compare At:
-
$169.40
- You Save:
-
$27.05
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
One of the teeth on the ice stripper was broken off Michelle F. • Hines , OR • August 07, 2014
Simply replaced the broken ice stripper with a new one.
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001773
This auger motor and yoke assembly powers the auger that moves ice from the freezer bin through the dispenser, restoring reliable ice delivery when the auger no longer turns or dispenses ice properly. What it does:
- Drives and supports the auger shaft that pushes ice to the dispenser chute
- Replaces a failed or noisy auger motor to restore normal ice dispensing
- Helps when the auger does not rotate, ice won't dispense, or the motor is unusually loud
- Interfaces with the dispenser gearbox/yoke to keep the auger aligned and turning
What's included:
- One auger motor and yoke assembly
Install notes:
- Disconnect power to the refrigerator before beginning any work
- Remove the ice bin and any obstructing panels to access the auger assembly
- Handle parts and panels carefully—sharp edges may be present
Do-It-Yourself Stories from Customers like You
The ice maker motor for the auger dispenser internal gears stripped Paul D. • Swanton , OH • April 07, 2015
Replaced the motor, however not the easiest to do with the older refrigerators. First I had to remove the shelf that hold the ice bin. There is a small screw midway underneath the tray. Once removed the shelf is loose but still hard to remove. There is a side panel that is slotted andonce removed the shelf can then be removed, but not knowing that it is a very odd fitting unit. Then comes the unplugging which cannot be seen so it is all by feel. Once the shelf drops down the plug is now...
Read more
More
$143.95
- Compare At:
-
$179.34
- You Save:
-
$35.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2195914
This support mounts in the dispenser area to secure the ice housing assembly. It helps keep the chute and door properly aligned so ice dispenses smoothly and the opening seals as designed.
- Supports and positions the ice housing/chute assembly in the freezer door
- Helps maintain proper alignment and sealing of the ice door/flapper
- Reduces wobble or flex that can affect dispensing performance
- Typical signs it may be needed: loose or misaligned dispenser housing, ice or air leaking at the chute, frost buildup around the dispenser, inconsistent ice dispensing
What's included: 1 ice housing support Install notes:
- Disconnect power to the refrigerator before servicing
- Remove the dispenser trim/control to access the housing; handle wiring and tabs carefully
- Remove mounting fasteners, replace the support, and transfer any reusable hardware
- Reassemble, restore power, and test ice dispensing and chute seal
Do-It-Yourself Stories from Customers like You
Dark bits of something embedded in the ice cubes and a crack in one of the plastic pieces of the ice maker Brett G. • Willow Park , TX • October 09, 2017
Replaced the ice tray and motor mount plate. While I was there I replaced the thermostat also. New parts arrived in a day and a half.
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79