Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Mtw55707q0 Parts

Skate Plate
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946509

Includes suspension pads.

More
$97.47

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Spin Tube Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP64208

Spin tube assembly with drive spacer, bearing, and shaft seals. Replace if washer leaks from bottom or basket doesn't spin properly. Verify fit.

Do-It-Yourself Stories from Customers like You There was a center (tub) shaft seal leak in our Maytag washing machine.   John W. • Manvel , TX • June 02, 2021

It was fairly difficult, but I watched and followed the Appliance PartsPros video and was able to get it done using the parts I purchased from APP. The leak has stopped (but I'm still watching after 5 loads). Read more

More
$154.38

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Temperature Selector Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8578337

Fix washer temperature issues with a new selector switch. Solves problems when hot or cold water won't flow correctly or temperature settings don't respond.

Do-It-Yourself Stories from Customers like You No warm water   Andrew K. • Bradenton , FL • July 22, 2019

Ordered the Switch-Temp ordered from AppliancePartsPros and installed it myself. Read more

More
$69.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Knurled Pin
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62837

Knurled pin secures knobs or dials to control shafts in washers. Replace if the original is missing, worn, or damaged to stop loose or spinning knobs.

Do-It-Yourself Stories from Customers like You Whirlpool shaking   Willy P. • Victorville , CA • May 19, 2019

Weekend laundry became very noisy, our 1987 Whirlpool washer began doing a dance across the floor and the drum was banging into the inner cabinet. After doing some research and watching a few videos on Appliance parts pros website. I inspected the washer and noticed one leg the rubber coating disintegrated, decided to change all four legs, springs and lid switch. Hardest part of the job is getting the cabinet together. Ops check good. Read more

More
$7.47

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Appliance Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 350938

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Do-It-Yourself Stories from Customers like You Dryer drum completely wore off all coating   Larry W. • Ubly , MI • July 01, 2016

Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more

More
$58.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Flexible Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: 40922

Replacement flexible hose that routes water inside your washer. Needed when original is cracked, kinked, worn, or leaking. Restores secure flow.

Do-It-Yourself Stories from Customers like You Leaking at deteriorated rubber hose adapter   Joachim D. • Alma , NE • July 17, 2014

Purchased the WPL 40922 hose kit. This kit is reasonably priced and has everything you might need to retrofit to most legacy Whirlpool brand washers. The fix went well and I also cleared the water solids build-up on the fill nozzle at the inlet to the wash tub. Read more

More
$44.24

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Console Strap (Control Panel Support)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8568314

Replacement console strap that secures the appliance control panel to the cabinet, restoring stable console alignment and preventing the control panel from shifting or sagging during use for safer, neater operation. What it does:

  • Secures the control console to the cabinet to prevent wobble, tilt, or separation.
  • Replaces a worn or broken strap commonly causing a loose or misaligned control panel.
  • Helps reduce strain on control harnesses and connectors that can occur when the console moves.
  • Matches OEM fit so the console remains properly seated and functional.
What's included: One console strap. Install notes:
  • Disconnect power to the appliance before beginning any repair.
  • Typically accessed by removing the console or control panel; retain all screws and clips for reassembly.
  • Use common hand tools (screwdriver, nut driver) and follow the model-specific service manual for exact steps.
  • If wiring connectors are disturbed, verify secure connections before restoring power.

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ground Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3351614

Size: 10-24 x 3/8 inch.

Do-It-Yourself Stories from Customers like You Timer/control failed   Gilbert G. • Lansing , IL • July 09, 2018

Replaced timer control unit, first time doing this. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Clutch Spring Cap (Washer)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62646

This clutch spring cap retains and protects the clutch spring in your washer's drive/clutch assembly, maintaining proper tension. Replacing a worn or missing cap helps the clutch engage smoothly and reduces slipping and noise during spin.

  • Secures the clutch spring within the clutch assembly to prevent movement or dislodging
  • Maintains correct spring preload for consistent clutch engagement
  • Can help reduce clutch slip that appears as weak/no spin, slow spin ramp-up, or intermittent spinning
  • Common signs of trouble: rattling or scraping near the drive, burning smell, or a visibly damaged/missing cap
What's included: 1 clutch spring cap Install notes:
  • Unplug the appliance and shut off water before servicing
  • Access the clutch per your model's service procedure; removing the gearcase/transmission and clutch may be required
  • Carefully relieve spring tension and note the orientation of the spring and cap before removal
  • Inspect the spring, clutch lining, and related hardware; replace any worn components during reassembly

Do-It-Yourself Stories from Customers like You My washer wouldn't go into a spin cycle.   Joshua P. • Cohutta , GA • April 18, 2021

I bought a clutch liner kit installed it in 5 minutes now it spins faster than ever. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer E-Ring Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: W10083190

Secures shafts and pulleys in your washer to prevent axial movement. Replace when worn or damaged to restore proper alignment. Confirm fit with model.

More
$7.71

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Switch Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9740848

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

  • Loose or rattling switch within the console face  
  • Difficulty selecting cycles as buttons wobble out of place
  • Water intrusion hastening corrosion of electrical terminals
  • Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Neptune mah4000 had a no spin but did pump water out but not all of it   Guillermo S. • Chicago , IL • March 06, 2017

I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Drain Hose U-Bend Retainer Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577378

Secures your washer's drain U-bend to prevent leaks and keep plumbing properly aligned. Simple push-fit installation takes just minutes to complete.

Do-It-Yourself Stories from Customers like You I lacked a bracket to direct the exhaust hose on my washing machine into the sink   John D. • Astoria , NY • October 25, 2014

Once I got the part, it was a simple matter to push the flexible rubber hose through the bracket which held the hose securely and directed the water into the basin of the sink. This part never came with the GE product. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Wire Tie
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10339879

 

Do-It-Yourself Stories from Customers like You Kenmore washer made humming noise no agitation no more spin   Peter W. • Cupertino , CA • October 18, 2026

Paid a friend and he changed the coupler, worked a couple times, then same prob. Hired a pro, ordered a lot of parts, changed drive shaft, transmission/gear case assembly, motor, coupler again. Refunding a lot of unnecessary parts. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Wire Connector Block
Genuine Whirlpool part
By: Whirlpool
Part Number: W10876590

Wire connector block for washers. Transfers electrical connections between wiring harnesses. Replace if connector housing is cracked or melted.

More
$9.82

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Vacuum Break Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8317926

Connects the vacuum break to the outer tub in your washer. Replace if cracked, split, or leaking to prevent water from bypassing the tub during fills.

Do-It-Yourself Stories from Customers like You Hose broke sending water that was supposed to goto the tub directly onto the floor.   Trent M. • Tinley Park , IL • March 14, 2014

Unscrewed console and tilted it back. Then removed clips for machine skin. Rocked it back slightly to access the tub side hose. Removed water inlet valve assembly and removed from the valve. Fished out the old hose. Fished in new hose. Reattched it then reassembled unit. Spent 15 min looking for clip I lost on NASTY FLOOR AAAAAARGH! When done I tested it then found the cold inlet hose screen was clogged. Went to store and replaced hoses and inlet screens too. Glanced over at other washer and... Read more

More
$24.68

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Best Seller
Balance Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP387240

The Balance Ring is an OEM part for Whirlpool washing machines. This part maintains the stability of the washer drum during the spin cycle. It contains liquid that helps balance the load, minimizing vibrations and noise while ensuring smooth operation.

Causes of a bad balance ring can include general wear and tear, exposure to heavy or unbalanced loads, or physical damage.

Symptoms of a bad balance ring include:

  • Excessive shaking or vibrating during the spin cycle
  • Loud banging noises
  • Washer moving or walking during operation
  • Uneven or off-balance loads

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Washing machine would shake so bad during the spin cycle that it would move about a foot   Charles L. • Arroyo Grande , CA • April 17, 2017

I first checked to make sure the washer was level. The washer is on a concrete floor. After watching lots of you tube videos I ordered all the parts that could be causing this problem. I ordered: Balance Ring, Suspension Pad Kit (3 rectangle plastic wear pads), Tub Suspension Pads(3 curved plastic wear pads), Suspension Spring, and a Spanner Wrench tool. After getting the washer apart it was obvious that the problem was the Tub Suspension Pads they had completely worn away so that only the... Read more

More
$81.74

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google